I have been searching through the forums for examples and haven't been able to find exactly what I am looking for.
Ok here is my issue. I need to compare the Conf # and line number on both sheet 1 and 2. So basically if the Conf # and the Line number match between page 1 and 2 then it copies the Conf #, Item Number(Sheet 1), and Detail(Sheet 2) to sheet 3 in a row. This needs to continue till the end of the Sheet 1. I have a pseudo report created with no code because I don't have a clue as to where to start.
I have the following code which takes a unique value from 'sheet 1', and searches for the value in 'sheet 2'. If there is a matching value in sheet 2 it will copy the full row into sheet three.
I need to extend the code so that all values from 'sheet 1' are copied to 'sheet 3' even if there is no matching value in 'sheet 2'. If there is a matching value in 'sheet 2' however I need the entire row to be copied to 'sheet 3'
Sub moving() Dim c As Range, d As Range Worksheets("Sheet2").Activate For Each d In Worksheets("Sheet1").Range("A1:A500") For Each c In Range("A1:A15") If d = c Then c.Resize(1, 70).Copy Worksheets("Sheet3").Range("A65536").End(xlUp).Offset(1, 0).PasteSpecial Paste:=xlPasteValues Exit For End If Next Next Application.CutCopyMode = False Worksheets("Sheet3").Activate Range("A1").Select End Sub
I have two tables, Table1 one has only customer codes in it, and I have Table2 with plenty of customer codes and those customer name, surname, age, location...
And I want to match and copy each of those customer codes in Table 1 all the information which is on Table2
Table 1: 50025 50026 50086
Table 2: Considering that name, age and location is each in separate cell
I have two sheets - one work sheet and the second - database with existing entries. Going by visual example below, I need the column C of the work sheet to automatically populate with the data pulled from the database sheet. For example, C4 on the Work sheet should find both values "Bike" and "Green" in one row on Database sheet and return the corresponding value 44444 from F97. The work sheet cells in the row C should remain empty if no match found on the database sheet.
I have two worksheets to combine. One of them have list of student numbers and their names, and the other has student number and their grades. I have to make another sheet that shows their name matched with each of their grades(grades are organized by date)
My thought process in this is to match the student numbers in two sheets, then combine name and grades and paste to another sheet.
I want to find the corresponding Disc Codes from a list and copy them in the DiscName column in the summary sheet. some lab names will have more than one Disc codes so when I run the macro it should bring up all the relevant Disc Codes matching with the Lab name to DiscName column.
Col 1 col 2 col 3 Lab name Disc Name(say abcd) xxxx yyyy zzzz ppppand
The list looks something like this.
Col 1 Col 2 Lab name Disc nameabcd xxxxxabcd yyyyyabcd zzzzzabcd pppppbcda qqqqqbcda rrrrrbcda iiiiibcda jjjjjbcda kkkkk
I have a Sheet in which the data is calculated by changing the Sheet reference and also by the period..
Now I need to transfer this data as values, however there are certail cells which are merged and therefore I get a prompt as I cannot paste as values using Paste Special-> Values..
In the file I have attached, this code works great taking information that has a value greater than zero from Sheet2 and putting it onto Sheet3. I tried to use this code to take information from Sheet1 from different cells than Sheet2 and also put it onto Sheet3, but I can not get the code to do anything.
I'm trying to copy a certain cell range from a particular row of a pivot table to another sheet, in a loop but I do not successfully do the paste. There's no error, just no data gets pasted.
In my code currently i have:
Code: Set Report = ActiveWorkbook.Sheets("Report") Set Pivot = ActiveWorkbook.Sheets("Pivot").PivotTables(1) dim size = Pivot.TableRange2.Rows.Count for i =2 to size -1 Set currentRow = Pivot.TableRange2.Rows(i) currentRow.Range(currentRow.Cells(1, 2), currentRow.Cells(1, 7)).Copy Sheets("Report").Activate ActiveSheet.Range("C" & 4 + i & ":H" & 4+ i).Select Selection.Paste next
Now, what does work if i select and paste the whole pivot row, but i don't want this. I've tried also with just referencing the Pivot table cells but also pasted nothing.
I have a sheet named "original" with columns a, b, c. My code checks each cell in column C for a value and then copys columns A,B,C to a sheet named "Order". It works fine except I need it to start pasting the results in row 16 instead of row
Sub PLACEORDER() Dim lastrow_first As Long Dim lastrow_second As Long Dim x As Long lastrow_first = Sheets("ORIGINAL").Cells(Rows.Count, "C").End(xlUp).Row For x = 10 To lastrow_first If Sheets("ORIGINAL").Cells(x, 3) <> "" Or Not IsEmpty(Sheets("ORIGINAL").Cells(x, 3)) Then................
see attachment below for easier comprehension of what I need to be done. Note that I have around 20 subjects (2 in example) and about 15000 values per subject (5 per subject shown) Basically, I want matching rows to be aligned (see grey) and non-matching rows to be deleted, throughout the 20 or so subjects.
I have a Sheet in which the data is calculated by changing the Sheet reference and also by the period..
Now I need to transfer this data as values, however there are certail cells which are merged and therefore I get a prompt as I cannot paste as values using Paste Special-> Values..
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from below attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5.
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
Columns in Sheet 1 are the following: company PERMNO number, dates, market capitalization (no data in this one)
Columns in Sheet 2 are the following:
company PERMNO number, ticker, dates, market capitalization
In Sheet2, there is a whole range of dates (between 1990 and 2004) for every single company, whereas in Sheet2 there is one or 3-4 dates for a every single company.
I would like to match the exact date/dates in Sheet1 in the range of dates in Sheet2 and then if they match, copy the corresponding cell value from the market capitalization column in Sheet2 to the empty market capitalization column in Sheet1. I also want that the company PERNO numbers match.
In short: if PERMNO numbers match, match the date/dates in Sheet1 within the range of dates for the same company in Sheet 2 and copy the market capitalization value to Sheet1.
Example:
Sheet1: A B C 1. PERMNO DATES MARKETCAP 2. 13123 199803 3. 13123 199904 4. 65456 200005 5. 44550 200104 6. 44550 200211......
If the name in Column F of "Sheet1" is found in "DataPEs" in Column B, then copy the block of 6 cells of data below it in column Q to column D of "Sheet1" in their relative rows. Additionally, if column Q has data then copy it, if not then copy the data only in column M. Finally, the number of matching names will vary in Sheet1 but will stay mostly the same in the DataPEs sheet. I've highlighted one block of data in green as an example.
I need a formula. Probably Vlookup. I'm having a LOT of trouble trying to figure out how to "phrase" the formula so let me explain what it is I'm trying to do. If a cell in Sheet 1 Column AS and a cell in Sheet 2 Column B match exactly, I want the cell in Sheet 2 Column C that is in the same row as the matched cell in Sheet 2 Column B to be copied into Sheet 1 Column BB in the same row as the matched cell in Sheet 1 Column AS.
For example, if cells in S1 Column AS and S2 Column B both have the name "LOS ANGELES" then "KLAX" will be copied from cell in S2 Column C (in same row as "LOS ANGELES") to S1 Column BB (in same row as "LOS ANGELES").
I want to copy the current region on sheet 3 and paste that into sheet2 starting with cell E4. But I don't want to actually use the copy method. I believe there is a way to do this. I was thinking the following:
[Code] ......
The idea I had was to simply state that cell E4 would be assigned the value of CurrentRegion on sheet 3. Is there a way to bypass the copy method?
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
I have a cell (A1) that contains text. That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26). When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1). The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
Sheet 1 has a list of unique ID numbers for several people. Sheet 2 is a master list of unique numbers for the entire population plus emails. Can i use a formula in sheet 1 to match the emails from sheet 2 to the unique id numbers in sheet 1?
i have a very large spreadsheet filled with telephone numberS and some other codes that go with them...i need to match the codes with the phone numbers.
Sub TRCO() Dim TNs As Long Dim i As Long Dim TempArray() As String Dim TRCO As String Dim CD03 As String Dim ASOC As Range TRCO = "TRCO" CD03 = "CD034DF1" 'Filter TN's Columns("B:B").EntireColumn.Insert Set tempRange = Range("A6", Range("A65000").End(xlUp)) With tempRange . AdvancedFilter _...................
I have one sheet that contains three columns of data. I want to look in another sheet and find if any of the rows in that sheet have the same data found in the first sheet.
I have attached an example sheet of what I need done:
In reference to the example, I am first looking in sheet 2. The information from Column A and C is what I want to find in sheet three if it is there. So for example, A1 and C1 are Joe and 233. I want to then look into sheet 3 and see if any row in sheet 3 has Joe in column A and 233 in Column B. if so I want the value in column B (233) returned into a new sheet.
I need this process to repeat for all rows in sheet 2. The number of rows may change in either sheet.
i have is that i want to use data from specific work sheets in another generic sheet, i have a list of names in the generic sheet and a lot of sheets titled by peoples names, i want excel to search for a sheet whose name corrisponds to the name in a cell on the generic sheet and copy from that individuals sheet a specific cell and put it in the generic sheet.
I have workbook that has several sheets within the workbook that are set up identical. Each of the sheets in the workbook are for a specific company.
As of right now I have been adding a sheet to the workbook that is an overview for what is in each sheet (the individual companies). Currently I am doing the formatting of the heading and column names manually and I pull the data from each sheet with a VLookup. I have been trying to enhance my VBA skills with coding something that will fill in the appropriate cells from worksheet to worksheet.
What I am trying to do is to populate an overview sheet with cells C24, C25, and B36 being static on each row per sheet. Then each row will be populated with cells C(36, 59, 70, 81), D(36, 59, 70, 81), F(36, 59, 70, 81), G, and H(36, 59, 70, 81). The overview sheet will have the diagram below in a ru
I am copying a large sheet into a spread sheet. The problem is one of the columns contain numbers with some cells having an asterisk at the end of the number. This causes problems with the formulas on other sheets that use this data. Can I use a formula or what is the best way to eliminate the "*".
I have a userform which clones the latest sheet and produces copy of it on the next sheet. The first sheet they will be cloning is the sheet called 'template', I however want this to be hidden since I do not want anybody to modify a sheet which basically serves purpose of a template. And once cloned, it is no longer needed.
On the click of the command button, the macro will create sheet1 taking the info from sheet named 'Template' in the same workbook . And now on the next click of the command button, Sheet 2 is created taking the info from sheet1 and Sheet 3 is created taking the info from Sheet 2 and so on. Here is what I currently have, so how can i modify it in order for my scnerio to work?
