Copying Rows With Multiple Colum Values To New Sheet
May 21, 2008
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from below attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5.
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
View 9 Replies
ADVERTISEMENT
Mar 30, 2009
I have this worksheet. What I have here is one activity ID with multiple information on BOQ and its related data. What I would like to have is just Columns A-J and move the required information in columns K-AS to H-J. The result of this will give me multiple rows of the same ACTID and one BOQ NO for each row....
View 9 Replies
View Related
Dec 24, 2013
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
View 4 Replies
View Related
Jun 30, 2014
I am trying to count the number of rows on sheets 11 To 2 in my workbook. I want to count the rows (excluding the header) on each sheet one at a time and place them on a "Summary" Sheet. So for example. The row count for Sheet 11 would go in cell B2 of the "Summary" Sheet. The row count for Sheet 10 would go in cell B3 on the "Summary" tab. The row count for Sheet 9 would go in cell b4 on the "Summary" Tab. I have taken a crack at the sub procedure but can't get the syntax and/or the logic correct.
Here is what I have so far:
Code:
Sub SummaryCalculations()
Dim lr As Long
Dim i As Long
Dim SheetArray(11 To 2) As Worksheet 'Sheets that the rows need to be counted on are 11,10,9,8,7,6,5,4,3 and 2
For Each ws In SheetArray
[Code] ...........
View 8 Replies
View Related
Oct 8, 2009
I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.
I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )
I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.
View 9 Replies
View Related
Jul 30, 2013
I have a workbook, "Assessment District" with 3 worksheets. In worksheet "Original," I have 252 rows with columns A-V. I want to copy two coloumns "C" (range 6-252) and "N" (range 6-252) from the worksheet, "Original" into a new worksheet titled "Send" in columns A & B. I only want to copy the two columns "C" and "N" for each row, if column Q does not contain "beach town" or "freeway."
For example, row 6 contains beach town, so I wouldn't copy C6 and N6 onto "Send," but row 100 doesn't contain beach town or freeway, so I would copy C100 and N100 into "Send."
This is a workbook that would be updated annually.
I'm not skilled in VBA at all, but want to impress my supervisor where I'm interning.
View 3 Replies
View Related
Aug 2, 2007
what I need, but can't seem to string anything together for the final product. What I want to do is search one sheet, in column BQ, for the word Complete. If a cell has that word in it, I want to copy that row, paste it into another sheet, and than go back and delete that row, and continue the search until all rows have been searched. Is there a simple way to do this?
I was thinking of an auto filter, but I'm not sure it'd work how I want it based off of what I've read.
View 9 Replies
View Related
Feb 23, 2007
i am trying to copy rows from several worksheets into one master worksheet. if column F of any row has a value greater than zero then the rows should be copied to the master worksheet with all data.
View 5 Replies
View Related
Jun 22, 2009
I'm working on a project requiring the matching of data from multiple worksheets and got some useful advice from someone on here a few months ago to get it up and running.
At the moment I'm using SUMPRODUCT with an IF argument to check rows on one sheet for matches on 5 others and return a "Yes" or "No" value, which is working fine. The next bit of analysis however requires copying the value from another column on rows that match, and pasting it into the first sheet.
View 12 Replies
View Related
May 21, 2014
I have a sheet with a lot of different data. In column M in workbook "Maximo report" there are 5 different values. I want to copy the rows that contain CDC_HVAC and that have the value "INPRG" in column G to the sheet HVAC_INPRG. I want to do this for all 5 values. Once the rows are in their respective sheets I want to filter them based on a formula and then sort from oldest to newest. I dont want the file to be too big and I think that VBA is the way to do it. I am new to VBA
View 6 Replies
View Related
Sep 1, 2009
I have one excel 2007 workbook with three sheets in it.
Sheet 1 is a master sheet with 1858 rows and 45 columns of data.
Sheet 2 has the qualifier data, that is, one column with 255 unique 6-digit integers each in its own cell.
Sheet 3 is a result or output sheet that is currently empty.
Here is what needs to be done.
Compare all of the 255 unique 6-digit integers from Sheet 2 with the integers in column number 15 (or Column O) of Sheet 1.
If there is a match then copy that entire row from Sheet 1 into Sheet 3.
View 9 Replies
View Related
Oct 20, 2009
I'm trying to create a macro that examines a sheet of data, and if the data in a certain column (column P) contains either A,B, or C then it would copy the entire row over to another sheet. If it contained a blank or D,E, F, etc,etc then it would just ignore that and move to the next row.
I have no idea where to start, i've searched google and here on Mr.Excel.
View 9 Replies
View Related
Oct 9, 2009
I have a Sheet in which the data is calculated by changing the Sheet reference and also by the period..
Now I need to transfer this data as values, however there are certail cells which are merged and therefore I get a prompt as I cannot paste as values using Paste Special-> Values..
View 14 Replies
View Related
Sep 29, 2008
I have been searching through the forums for examples and haven't been able to find exactly what I am looking for.
Ok here is my issue. I need to compare the Conf # and line number on both sheet 1 and 2. So basically if the Conf # and the Line number match between page 1 and 2 then it copies the Conf #, Item Number(Sheet 1), and Detail(Sheet 2) to sheet 3 in a row. This needs to continue till the end of the Sheet 1. I have a pseudo report created with no code because I don't have a clue as to where to start.
View 14 Replies
View Related
Dec 31, 2012
I have a spreadsheet with a lot of financial information going down a column (about 500 rows down). Most of the cells are just typed in, but certain rows have sum formulas in them. Is it possible to copy values from another workbook, paste the values in, but somehow keep the formulas that are running through?
View 1 Replies
View Related
Apr 23, 2014
The below code will copy data from one sheet and post to another. How can I modify this code not to overwrite existing data? I have a total of five different sheets with variable length of data and my objective is to run a macro that will capture the data from all five sheets and compile into a master sheet with loosing data integrity and not overwriting existing data.
[Code] ........
View 2 Replies
View Related
Feb 11, 2010
I'm trying to copy multiple rows with a macro. Below code lets me duplicate one row at the time and the duplicate is inserted just below the chosen row.
View 2 Replies
View Related
Feb 27, 2014
I am using the below macro to copy the rows (Starting from Row 2 excluding header row) to another sheet (Starting from Row 2 excluding the header row). I have a huge number of rows which i need to copy to the new sheet (crossing 1.5 Lakh records) which is probably causing "Out of Memory Error: 7" to occur when i execute the below code.
[Code].....
View 14 Replies
View Related
May 13, 2014
[Code].....
In the file I have attached, this code works great taking information that has a value greater than zero from Sheet2 and putting it onto Sheet3. I tried to use this code to take information from Sheet1 from different cells than Sheet2 and also put it onto Sheet3, but I can not get the code to do anything.
Example.xlsm
View 6 Replies
View Related
Jul 29, 2014
I'm trying to copy a certain cell range from a particular row of a pivot table to another sheet, in a loop but I do not successfully do the paste. There's no error, just no data gets pasted.
In my code currently i have:
Code:
Set Report = ActiveWorkbook.Sheets("Report")
Set Pivot = ActiveWorkbook.Sheets("Pivot").PivotTables(1)
dim size = Pivot.TableRange2.Rows.Count
for i =2 to size -1
Set currentRow = Pivot.TableRange2.Rows(i)
currentRow.Range(currentRow.Cells(1, 2), currentRow.Cells(1, 7)).Copy
Sheets("Report").Activate
ActiveSheet.Range("C" & 4 + i & ":H" & 4+ i).Select
Selection.Paste
next
Now, what does work if i select and paste the whole pivot row, but i don't want this. I've tried also with just referencing the Pivot table cells but also pasted nothing.
View 1 Replies
View Related
Jan 18, 2007
I have a sheet named "original" with columns a, b, c. My code checks each cell in column C for a value and then copys columns A,B,C to a sheet named "Order". It works fine except I need it to start pasting the results in row 16 instead of row
Sub PLACEORDER()
Dim lastrow_first As Long
Dim lastrow_second As Long
Dim x As Long
lastrow_first = Sheets("ORIGINAL").Cells(Rows.Count, "C").End(xlUp).Row
For x = 10 To lastrow_first
If Sheets("ORIGINAL").Cells(x, 3) <> "" Or Not IsEmpty(Sheets("ORIGINAL").Cells(x, 3)) Then................
View 2 Replies
View Related
Dec 18, 2013
My knowledge of Excel 2007 is minimal, from formatting individual cells, to creating column totals. I've used it for years in my household budgets. I have an attendance form which is about 3 pages long; currently, it's separated at page breaks, with column totals at the bottom of each 'page'. This is easy because the Row #s are infinite, right? Lately there have been regular adjustments, and I believe the project might be less cumbersome if it were spread out on separate sheets, but how to bring the rows of column totals to cumulative totals on the last sheet.
View 6 Replies
View Related
May 1, 2013
I have a worksheet "parent child" with product data, cells F4 and BK4, pull pertinent data from cells T2 and M2 respectively on a different sheet "products".
A5:A196, D5:D196, F5:F196 is dependent on cell F4 and BK5:BK196 is dependent on BK4.
Once we get to row 197, the cycle starts over again. F197 and BK197 needs to equal products!T3 and products!M3. Then rows 198 through 389 will be dependent on row 197.
I basically need this to repeat perpetually for about 1000 different products on the products sheet, thus the ability to create approximately 193,000 rows.
I am not sure what it will take to do this, i am fine if I have to drag and copy all rows, which I have tried to create and failed at, I end up with products! T196, instead of T4.
View 1 Replies
View Related
Dec 14, 2012
I am trying to optimize my code below. It works but it is soo slow, it seems to slow down on the array copy and paste special areas. I believe this is because its doing a cell to cell paste method. These sheets have data as well as graphs that i want to retain on the new sheet, but i could select ranges for each each if that would speed up this procedure.
Code:
Sub CreateDataSheet()
Dim ws As Worksheet
Dim sDataOutputName As String
With Application
.Cursor = xlWait
.StatusBar = "Saving DataSheet..."
.ScreenUpdating = False
[Code]....
View 9 Replies
View Related
Oct 9, 2009
I have a Sheet in which the data is calculated by changing the Sheet reference and also by the period..
Now I need to transfer this data as values, however there are certail cells which are merged and therefore I get a prompt as I cannot paste as values using Paste Special-> Values..
View 14 Replies
View Related
Nov 2, 2008
I have one Excell Book with two work sheets. The 1st sheet (Sheet Name : Data ) contains the data... and in the 2nd sheet (Sheet Name : Rekey) i have a specific form in Rekey sheet and some data in Data sheet. Now i have to copy Rekey sheet into multiple times .... with different sheet names... and the sheet name are in Data sheet from cell A2 to end.....
For e.g. in Data Sheet cell A2 contins work1 and cell A3 contains work2 and A4 contains work3..... and so on....
Rekey sheet contains some form....
I need to paste Rekey sheet multiple times with sheet name work1, work2, work3..... and so on....
View 9 Replies
View Related
Jan 16, 2007
I'm writing code which will copy multiple sheets of information in a workbook (from a report) and trying to paste it onto one sheet in another document where I can further manipulate the data. Here's my code, I've made some mistakes, and I've just been banging my head against the screen try to fix it. I'm erroring at ActiveCell. Offset(1, 0).Range("A1").Select. I'm trying to paste it all in one sheet at the next blank cell in the sheet and then close the document after it's all been pasted.
Sub OpenDataSheet()
'Opens CSS Report
Workbooks.Open Filename:="C:Documents and SettingseichornjDesktopTest and Destroy est and destroy CSS.xls"
'Delete first two sheets of CSS report
Application.DisplayAlerts = False
Worksheets( Array(1, 2)).Delete
Dim mySheet As Worksheet
For Each mySheet In Worksheets
mySheet.Select
'Delete unneeded rows of CSS report
View 7 Replies
View Related
Mar 20, 2014
I'm sure there is an easier way than copying and pasting each individual cell from one spreadsheet to another. Is there a way I can define a batch of cells (city, state, phone #) and copy them into the other spreadsheet so I don't have to do each cell individually?
Here is a picture to show what exactly I am trying to do.
SS.PNG
Also, the cells that belong in the same column and row on one spreadsheet are equal distance from each other throughout the other spreadsheet that has all the info in 1 column.
View 1 Replies
View Related
Jun 2, 2009
i have a certain column that tells me if a client has withdrawn from the company, and the column just says "y" or "n" i want excel to automatically copy the whole row to another sheet if that cell is a "y" for yes the client withdrew...
View 9 Replies
View Related
Oct 6, 2009
I have a workbook that tracks pollutant emissions. The workbook could end up having up to 180 worksheets, one for each pollutant and the emission total. I have VBA to create a new sheet for each pollutant (attached) using a hidden template sheet.
The summary sheet in position 1 needs to list each pollutant worksheet on a new row, and the same 4 cells from each worksheet (id, name, value, value). I have been typing out the cell references in the summary sheet, and it gets boring [=Sheet!Cell id], [=Sheet!Cell name], etc.
Is there a way for me to copy those cells to the summary sheet when the new sheet is created?
View 6 Replies
View Related
