I have a cell, M87. The score in M87 can be less than 13 or greater than 25. I need a formula within M94 which refers to M87, and outputs depending on the the following criteria. If M87 is less than 13 then output as D. If M87 is 14, 15, 16, or 17 then output as C. If M87 is 18, 19, 20, 21, 22, 23 or 24 then output as B. If M87 is greater than 24 then output as A.

I am looking for a function like MATCH if the match type were set to -1. However my data is sorted in ascending order. I am mining data from a Pivot Table, and it has dates across the top. Of course the pivot table will have the data sorted in ascending order from left to right. I want to find the first date that is greater than today. With weekends and holidays I can't just use TODAY()+1. Is there a function that can do what I am asking? Also I do not want to change the pivot table itself.

I need a formula that looks at the total in H40 and if the number is between 32 and 40 I need it to return the number then if the number exceds forty I need to multiply the overage by 1.5 and add it to the 8 for a total of 11.

I am creating my first Userform and having some problems. I take the data supplied by the userform and try to match it as closely as possible to a row of information. Currently I am using four cells to autofilter my spreadsheet data. Two of the cells I am looking for a exact match. The other two cells I am looking for the number that has been input or anything greater than it. Here is the code I have come up with...

You take a childs actual age in months and years (ie 9.8 for 9years and 8months). They then, in theory, should be at that age level for reading and spelling.

I have the age in B4, the reading in C4 and the spelling in D4. If i use CF to say i want C4 to be red if it's less than B4, Amber if it's the same and green if it's over, as soon as i okay it, C4 goes amber, because it's equal to B4, which is blank. I can get the colours to work, i just can't figure out what to put to turn the amber off when cell B4 is empty.

I've tried as many combinations as my little amount of excel knowledge can cope with.

I have start date(Column A) and an end date(Column B) in two columns and I have found out the difference between them in column C in hh:mm:ss format. I want to find out how many cases are greater than 2 Hrs but less than or equal to 4 Hrs.

Starting in cell F3, if Column F is greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Then go to Column F in that same row that had contents in Column A, if the contents in that row of Column F are greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Persist with this pattern until every row in Column F has been checked.

I am revising a spreadsheet to automate some cells and size cable for my job. I am currently using the VLOOKUP command to search a table for the proper ampacity and return a cable size based on the minimum circuit amps. The problem however is the VLOOKUP command searches for a number equal to or less than my circuit amps and returns this cable size. I need it to return a size equal to or greater than the minimum circuit amps. How do I get it to lookup something equal to or greater than the minimum amount?

I am using cell V7 to input the formula but I want cell V7 to tell me if the number in U7 is greater than or equal to the individual #'s in cells U7-U40 and I would like it to put a 1,2,3 in the cells of V7-V40 for the three highest numbers in order of largest to smallest if is this possible?

In my Excel spreadsheet I enter todays date in a single cell (A2), then I list various dates that jobs come into shop in other cells (A8:A108). I have cells ( F8:F108) where I have been manually entering an asterik (*) for those jobs equal to or greater than five days old in cell (A2). Is there a formula that can do the math for me? I've tried Excel help but to no avail.

I have what may be a math question as much as an Excel question. See my attached spreadsheet example in which I grow the denominator of a ratio by a fixed percentage until it equals or exceeds the numerator. This results in the denominator being grown X number of times.

I'd like all Cells in column AC (e.g. AC$3$:AC$517$) to be filled with yellow fill if the cell value is any date greater than or equal to today. Any past dates can be left blank (for now)

I'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.

One aspect of my Excel-based project involves comparing the operator-entered part number (in Excel) to a predetermined list of part numbers in one column of an Access database table. Right now, my program is telling me that every part number entered in the spreadsheet (50+) does not match any part number in the database, which I've verified to be incorrect. I've checked that both the spreadsheet part number and the database part number are of the string datatype.

To the best of my knowledge, my looping logic seems valid and robust. To the best of my knowledge, there are no hidden characters in either the database cells or in the spreadsheet cells causing this apparent mismatch. I'm completely stumped at this point as to why my program doesn't detect any matches between the spreadsheet and the database table. Below is the Sub containing the code for checking that the part numbers match:

[Code] ....

This issue seems to be a hybrid issue between Excel and Access with (to me) more of the issue on the Access end.

I am trying to make a condtional formatting to a cell, so that it will change colour depending on the time since the date in the cell. I am trying to check for Less than 6months, equal to 6months and greater than 6months.

Trying to find the sum of all cells in the array described in the formula that are equal to the values inside the quotations. I used this exact (as far as I can tell) formula to find the sum of values that were NOT equal to my quoted values and it worked just fine. Any ideas why formula 'A' will not work but formula 'B' does work? I have a feeling I'm missing something simple here!

Formula A - Does not work: =SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000="REJECTED"),--('Master Lead Sheet'!$N$2:$N$10000="CONDITIONED"),--('Master Lead Sheet'!$N$2:$N$10000="APPROVED"))

Formla B - Works: =SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000"No Answer"),--('Master Lead Sheet'!$N$2:$N$10000"Disconnected"),--('Master Lead Sheet'!$N$2:$N$10000"Wrong Number"),--('Master Lead Sheet'!$N$2:$N$10000"EMAILED"),--('Master Lead Sheet'!$N$2:$N$10000"needs to be emailed"),--('Master Lead Sheet'!$N$2:$N$10000"Refund"),--('Master Lead Sheet'!$N$2:$N$10000"REFUNDED"))

I've created the following function that chooses the maximum value from a set of cells then inserts theappropriate row number (within a table) into a new cell.

It's working fine until I have 2 cells with the highest value. The above statement is entering the first cell that meets the criteria in the new cell but ignores the fact there maybe 2 (or more) of the same value.

How can I get both (or all) to be entered in the same cell? Is there a better way, maybe highlighting all the rows in the table that equal the max figure?

In columns A and B, I have a list of time values. Format: [h]:mm:ss. Column C is B-A. Last row of Column C is the sum of all time values of column C. Sometimes A>B, or either A or B is blank. In such casescorresponding C value becomes ##### (negative date and time) And hence sum of all C values which is in last row of C becomes ####.

I have a spreadsheet that has a number of values and a separate sheet that has a paid total. What would be the easiest way to find the values in sheet 1 that total the sum in sheet 2? There may be more than one possible solution as to the items that total the sum.

am currently setting up a fantasy football league.

i have set up the league, with team name overall points and position, my problem is that when 2 teams have the same points one team is omitted and the other team has its name on both entries

the formula's i am using are

vlookup = to find the name of team for the points large = to find out points of each team

I want to look to a range and if there is a value greater than zero I want to count it. I keep going round in circles trying to do this and now I give up.