I have a textbox with a label & he will type in his name in the textbox & it appears on the label. Is there any way to put the word "Hi" on the label & then have his name appear after "Hi" on the label. I can do it using 2 labels side by side but I would like to have it all on 1 label
View 3 RepliesI'm using the code below to create a pie chart and the code works fine.
[Code] .....
However, I now would like to change this so that I can add the word "FTE" at end of this part of code which creates the 'Value' data label.
[Code] ....
I have two userforms with a label which displays CompetitorID. I want to transfer content (displayvalue) from UF1.label to UF2.Label. I know labels don't have a value property but want to simply know if it can be done as presently I'm getting run time error 380, can't set property value.
VB : HeadEntryForm.lbCompID = Me.lbCompID ' trf selected competitor ID to ID field on HeadEntryForm
I have a spreadsheet with a customers information and various parts we make for them. I need to be able to take this information and incorporate it into a label format. I need something quick and easy as there can be 150 parts per customer
Customer: ABCD
Customer PO: 12345
Part Number Quantity
AB 1
** 15
EF 22
GH 14
and I need it to output:
CUST: ABCD PART: AB
PO: 12345 QTY: 1
CUST: ABCD PART: **
PO: 12345 QTY: 15
CUST: ABCD PART: EF
PO: 12345 QTY: 22
CUST: ABCD PART: GH
PO: 12345 QTY: 14
I want to extract particular label from the text file named 'Branch : xxx" i what to extract the xxx from the text file and save it as worksheet name, is that possible through a macro? Then if required i will import the text file through the recorded macro.
View 1 Replies View RelatedIs there a way to change the text on a label in a form with macros. Im going to be updating some values (Years) and want these to change automatically.
View 2 Replies View RelatedI have a simple line chart but I want to add an text description to each of the points. The data is driven by a pivot table so the text needed may change based on the drop down options.
If I was using the below data I would want the line graph drawn using the date and value, but the data label at each point to state the description.
Date Value Description
01/01/2010 90% Text A
01/02/2010 80% Text B
I have a label in a userform which is picking up data from sheet1.range("a1") and i would like it to show along the left side of the userform so rotated at 90 degrees.
I do not have to use a label but I do need the data to be shown at 90 degrees.
I have an excel application that I'm developing that is going to be used by two different departments. On one side everything will pretty much be userforms. The sheets they the data I need to pull in for them is on sheets that I have such that their visibilty is equal too xlveryhidden. I'm trying to change the captions on labels using the data on the veryhidden sheets. Something like this.
'frmCurrentProposal is a userform
'lbGroupName and lbGroupNum are both labels that should vary
frmCurrentProposal.Show
frmCurrentProposal.lbGroupName.Caption = Sheet2. Range("B2").Value
frmCurrentProposal.lbGroupNum.Caption = "Group # " & Sheet2.Range("B3").Value
The labels are not changing their values.
I used a label from the forms toolbar and can't seem to change the color of the text.
View 5 Replies View RelatedIs it possible to vertically center the text in a userform label? For example: I have a label that's 22px high, but the text is only 10pt -- at the moment it just hangs out at the top of label looking bad.... I'd like to place it the middle if possible.
View 2 Replies View RelatedHow do I name my data series in a chart so that the name consist of both a cellreference and my own text?
Example: "Name" & Sheet1!A1. If the value in A1 is 2 then the series name shold be Name2
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
I have a label control whose caption is set from text from a work sheet
How can I set the text of the caption to bold
I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?
Also example of my code is:
Private Sub EventDateResult_Click ()
If Range("A5") = "1" Then
Me.EventDateResult.Caption = Range("N4")
End If
End Sub
I'm working for a local authority who have been given a mass of survey data. In this particular task, residents of each small district within our area have been asked their levels of satisfaction with a service, and how important they think that service is. I want to plot these two values against each other using a scatterplot, and label each service.
Excel does not automatically allow this so I used a very good sheet from the forums here: Attach labels with names to the points in a scatter plot. It's the top file, and works well. However, I can't seem to customise it for my own data.
Problems include:
- Excel often freezing when I try to run it
- Not all the data being picked up for the chart
- Incorrect labels being picked up..........
probably missing something simple, but how do I centre the text in a userform "Label"
View 2 Replies View RelatedI need to print quite a few mailing labels for Christmas cards from an Excel 2000 Worksheet. Could someone list the steps I must take to do this?
View 2 Replies View RelatedCode:
Sub test1()
Dim a, e, i As Long, ii As Long, b(), x
With Range("a1").CurrentRegion
a = .Resize(.Rows.Count - 1).Offset(1).Value
[Code] .........
how to make the text in a Control Tool Box "Label". On Load, show text one letter at a Time?
View 9 Replies View RelatedI am trying to create a button where it automatically copys and paste a label. I need to change the label name from the original to say "New". Since this button will be used constantly, how do I find the last Label copied, and change the caption on that lable? If you look at the code I have, you would see that it calls for a specific Label number to be changed (Label 826).
Sub CreateANewPN()
Dim LastRow As Long
Dim SecondLastRow As Long
Range("I65536").Select
LastRow = Range("I65536").End(xlUp).Row
SecondLastRow = LastRow - 1
Range("A" & SecondLastRow, "A" & LastRow).Select
Range("A" & SecondLastRow).Activate
Application.CutCopyMode = False
Selection.EntireRow.Copy
Range("A" & SecondLastRow).Select
Range("A" & SecondLastRow).Activate
Selection.Insert Shift:=xlDown
ActiveSheet.Shapes("Label 826").Select
Application.CutCopyMode = False
Selection.Characters.Text = "NewPN"
End Sub
i am populating a form, one label on the form accepts a string (2, 3, 6, 7) or (45, 46, 49) without the brackets. ie. LblWrd
VB:
For i = 2 To final
If BxSC = ws.Cells(i, 43) Then
LblWrd = ws.Cells(i, 44)
ElseIf BxSC = ws.Cells(i, 45) Then
LblWrd = ws.Cells(i, 46)
ElseIf BxSC = ws.Cells(i, 47) Then
[Code]...
i want to take those values, split them at the comma and place them into an array. That array then populates a combobox.
something along the lines of:
VB:
Private Sub BxWrd_Click()
Dim arr() As Variant
Dim splitTarget As Variant
Dim splitString As String
[Code]....
but i am not sure how to get there.
Is it possible in a Label caption to be visibile in a second?
I just want, when the user hit the commandbutton1, a label will be visible in a second and then disappear again after 1 second.
I have the following code written to check calculations. Now I would like to make one or another Label Visible depending on the value this code returns.
If TextBox57 = 0 then I want Label 7 to visible but if it doesn't I need Label 8 to be visible. I am starting both Labels hidden.
I am trying the below code but I get an Method of Object failed!
Private Sub Label4_Click()
ActiveWorkbook.FollowHyperlink Address:="http://www.rmdmo.co.uk/"
End Sub
Possible to create a class that contains a textbox and a label?
I need something like a checkbox except instead of showing a check mark, it shows how many time the checkbox is clicked.
What I can think of is a combination of a textbox and a label. When the label is clicked, the number in the textbox increases (or decreases, depending on a pre-set condition) by one.
I have a worksheet ("Pivot Tables") pivot table ("Breakfast"), and the Field ("Date") in the Row Labels. The date ranges from 1/20/2014 - 2/6/2014. My issue is figuring out a macro to automatically change the date ranges to what I want.
The macro I recorded is this:
Code:
Sub DateChange()'
' DateChange Macro
'
' Keyboard Shortcut: Ctrl+r
[Code].....
Is there a simpler way to write the code so I do not have to change the dates I want visible each time. But instead just write the start and ending date.
I am trying to format a label as a number with two decimals. I have searched this and other forums and see code such as:
Label18.Caption=Format(sheet1.Range("A!").Value, "0.00")
It always gives me an error: "Wrong number of arguements or invalid property assignment"
The word "Format" is highlighted.
I have tried putting the code in userform Initialize and also Activate. I am using Excel 2002.
I am having trouble linking a textbox so that it will out put in a label on a worksheet.
I have been given the code
Private Sub UserForm_Initialize()
TextBox1.Value = Worksheets("Sheet1").OLEObjects("Label1").Object.Caption
End Sub
But this returns the error
Run time error 1004
Unable to get OLE Objects property of the worksheet class
This is something that once perfect on one label and textbox I will then wish to make work on multiple labels.
I have a plot that shows the position of a drifting buoy in the ocean. I have created a second series that is just the most recent position of that buoy. Everyday, using VBA, I update the chart 2nd series to point to the location of the new lat and long. For this second series, which is only one point, I have data labels turned on. I replace the data label text with the date and time of that latest position. Here is my problem. I can not find a way to format the date. No matter what I try, it has the format mm/dd/yyyy hh:mm AM/PM. I really just want it to be a 24 hour clock (mm/dd/yy hhmm).
I have tried forcing the format of the variable date_of_latest_pos, I have tried changing the cell format that contains the actual date and time...
ActiveChart.SeriesCollection("Latest Position").ApplyDataLabels AutoText:=True, LegendKey:= False, ShowSeriesName:=True, ShowCategoryName:=False, ShowValue:=False, ShowPercentage:=False, ShowBubbleSize:=False
ActiveChart.SeriesCollection("Latest Position").Points(1).DataLabel.Select
Selection.Characters.Text = date_of_latest_pos
Selection.AutoScaleFont = False
With Selection.Characters(Start:=1, Length:=23).Font
.Name = "Arial"
.FontStyle = "Regular"
.Size = 8
.Strikethrough = False
.Superscript = False
.Subscript = False
.OutlineFont = False
.Shadow = False
.Underline = xlUnderlineStyleNone
.ColorIndex = xlAutomatic
End With