Formatting Pivot Table With Custom Ranges?

Feb 2, 2014

My boss asked me to format a pivot table like this with irregular ranges:

I've had a crack (as seen below and have gotten everything right except the strange group irregular ranges. I'm stumped! I'm not sure if pivot tables even have a function for irregular group ranges.

My raw data looks like here is its layout:

View 7 Replies


ADVERTISEMENT

Custom Sort Of Row Label In Pivot Table

May 3, 2014

Everyday I've to make Pivot Table from Data given by Branch Manager. When I create Pivot, my Row Label comes in order like

ICV TRUCK
LCV BUS
LCV TRUCK
MCV BUS
MCV TRUCK
PICKUP &
SCV shown in "automaticPivot" sheet in attached file. Later I arrange it in order of
MCV BUS
LCV BUS
MCV TRUCK
ICV TRUCK
LCV TRUCK
PICKUP
SCV by dragging manually everyday shown in "desiredRowLabelSort" sheet.

Is there any way that sort Row Label automatically instead of manually OR any other faster way than doing manually?

View 6 Replies View Related

Creating Custom Pivot Table Report Filter

Aug 8, 2012

I was wondering if it is possible to create a custom pivot table report filter? I would like to take an existing pivot table report filter and manually add values into it. I would like to do this because I have multiple pivot tables, some with the same values and some with different values and I have a VBA code from Contextures that applies a mass filter to all fields with the same name. So if i could manually add values into one report filter, I could filter from one location and have all my pivot tables update at the same time if they contain the value that i would like to filter by.

View 1 Replies View Related

Pivot Table / Create Average Of Proportions (Custom Calculation)

Aug 2, 2013

I am trying to find expected proportion of code per country by looking at current values. I have a list of countries and associated classifications (0-5) with counts, similar to as follows:

Country
code
count

USA
1
65465

USA
2
54651

USA
3
65411

[code]...

I am interested in creating a pivot table with the average of each code as a proportion of each country. The final table would be expected proportion of codes. The pivot table for this set would look like this:

Row Labels
Average

1
5.4%

2
3.9%

3
4.7%

[code]...

Mean per code of the proportion of code per country

View 1 Replies View Related

Pivot Table Ranges

Aug 4, 2007

I have just created a pivot table, however, i have just put the range to the cells that have data in them. The problem is, is that i want to make the cell range bigger, but the cells that i want to include do not have data YET, but will in the future. I have tried creating the pivot tables including the cells with no values, but it ends up puting 1 into the pivot tables cells for some reason.

View 9 Replies View Related

Suppress Pivot Table Refresh When Changing Custom Name In Field Value Settings?

Apr 30, 2014

I often use the same file/pivot table for both month and weekly reporting. In my source data my field headers show 1,2,3,4..etc. This way I can use for month or weekly. But I often change the "Custom" name on the Field Value Settings to something more descriptive like "Jan" or "Week1"

The problem is that each time I update the the "Custom" name the Pivot Table auto refreshes and it takes forever to re-label all the columns.

Is there a way to suppress this refresh when updating the Custom Field Name?

Capture.JPG

View 2 Replies View Related

Indirect And Pivot Table Ranges

Oct 6, 2008

I have a sheet that is a download off of another system every month which means that the number of rows change from month to month. I have a pivot table of this data as well but I want it to change it's data range as it changes month to month. I have a Formula in cell C1 that defines the range, the formula is ="A5"&":"&"S"&B1 {B1 being the =COUNTA(A:A)}

Which yields A5:S31. Logically the way I thought this would work is by setting the Pivot Table range to : =Indirect(com.jdedwards.jas!$C$1) But this is not allowed as the range in a pivot table must be more than two rows. The second thing I tried was naming the range. I went to insert->Name->define and set the name to "Download" and the range to =Indirect(com.jdedwards.jas!$C$1). it didn't give me any errors but now I don't know how to set the pivot table to that named range and i don't even know if that is really going to work.

View 5 Replies View Related

Base Pivot Table Off Different Ranges

Dec 7, 2006

I need to read consantly changing shift time/ covered data from a Pivot Tables pivot chart and populate this data into number of shifts covered/ uncovered. This information is then put into a chart over a 24 hour period (from 0700 to 0700). I have been populating the data from the pivot chart by hand by referencing the number of shifts in the covered line and dragging it to correspond to the shift time data part. I then have to do this for the uncovered shifts. As the data in the pivot chart is constantly changing, i need to do this data ransfer 'automatically'. I have started to look at and learn VBA, but i am getting nowhere fast. I enclose a worksheet (blank) to give you an idea fo what i am trying to do.

View 4 Replies View Related

Consolidate Different Ranges Into Pivot Table

Feb 24, 2008

find the data Attached. I have 3 work books which contain logged, issued and cancelled data stored in different work book. There are two common fields like Location & segment in all the work books whcih are common. I want the data in a sequence by which consolidation should happen for location and the segemnt should be a page field and datas are arranged accordingly. I am attaching a work book.
how to do this in multiple consolidation of ranges in pivot or any other way.

View 7 Replies View Related

Applying Named Ranges To Pivot Table

Oct 6, 2008

I have a range of data that is added to constently. I named the range "Download" and defined it as =Indirect(Sheet1!B3) where Sheet1!B3 has another formula which produces the range of the data. I want to apply the named range to a pivot table so that when it updates, the range is updated as well but i'm not sure on how to do this. I put the word "download" in the range input of the pivot table wizard but it results in an error and doesn't complete. how can i set the pivot table's range to the named range that I defined?

View 5 Replies View Related

Pivot Table Using Multiple Consolidation Ranges

Dec 19, 2013

I have 3 tabs in my spreadsheet that I want to combine in a Pivot Table. All 3 tabs have the exact same headings in Columns A-J. I want to create a pivot table to pull in all the data from the 3 tabs while using the Current Column headings to create the pivot table. But the pivot table wizard is only giving me "ROW" and "COLUMN" which does not allow any flexibility to create the table the way I want and move the various column data around.

Is there a better way to Pivot Table data from the separate tabs? My data on each tab is changed weekly and I was hoping to just update the pivot table when the data changed..

View 2 Replies View Related

Pivot Table With Multiple Data Ranges

Mar 21, 2007

I have a workbook that contains 52 spreadsheets (one for each week of the year). Each contain the same column headings. The columns contain both numberic and text data which I need to pivot. I can individually pivot each sheet to obtain weekly data but I would like to obtain year to date data throughout the year. How can I merge all of my 52 sheets together to utilize just one pivot table.

View 6 Replies View Related

Using Dates Ranges To Alter Pivot Table Data Set

Oct 26, 2009

I would like to use a pivot table to manipulate my data. However, I need to be able to select data within my data set by a range of dates (usually a week). Is there a way to use a pivot table but reduce the data set by a user enter range of dates?

The date field is the first column in my data sheet.

View 2 Replies View Related

Excel 2011 :: How To Include Multiple Ranges On Pivot Table

Mar 15, 2012

I have looked and experimented on how to include multiple ranges on a pivot table in excel 2011, i have found how to to it with the wizard but i can not find the wizard.

How to separate the ranges in the selection box? They are going to be going across sheet is that makes any difference.

View 4 Replies View Related

Pivot Table Formatting With Vba

Feb 13, 2007

A report is written in a massive text file, and i've got my code to shrink it down, tidy it up and spit out a nice pivot table which my manager wants to be pretty colours (colors for US spelling). So far i've go this (which i recorded lazily):

ActiveSheet.PivotTables("PivotTable2").PivotSelect "Division[Numerical]", _
xlDataAndLabel
With Selection.Interior
.ColorIndex = 35
.Pattern = xlSolid
End With

Now - what happens if there are no entries for the "Numerical" division? ERROR!!!
How can i get some kind of "IF this division is present - color 35 please, if not, carry on" command? I have experimented til all the cows have come home, but i still end up with errors and freezing.

View 2 Replies View Related

Group Numbers Into Workable Ranges In Order To Run A Pivot Table (days Taken To Update)

Apr 28, 2014

Cells in row C have numbers (number of days between date a and date b)

I want to group the days so I can run a usable pivot table as follows:

Up to 7 days between update date and today (ie 1 week) 8-14 days between update date and today (ie 2 weeks) 15-21 days (ie 3 weeks) 4 weeks +

My attempt is as follows but only give two results and not 4?

=IF(OR(C2<=7),"1-7days",IF(OR(C2>=8,C2<=14),"8-14days",IF(OR(C2<=21,C2>=15),"15-21days","Over4weeks")))

View 3 Replies View Related

Change Formatting Of Pivot Table?

Jun 19, 2014

Pivot Tables. I've created a very simple one where my Row Lables are Salesperson then date and the second column is Sales. It looks "backwards" to me, because each salesperson's total sales for all dates combined is ABOVE the data by date. To make it worse, there's a line below the name, which looks like it's separating the name from the next few lines! With the next salesperson's name in the same "block" as the previous salesperson's details, it's very confusing! It would make more sense to me to have each salesperson's total be at the BOTTOM of their section!

View 6 Replies View Related

Conditional Formatting Of Pivot Table Through VB

Jun 22, 2014

writing VB code to conditionally-format the pivot table shown here (I am not inclined to use the Excel Conditional formatting option as it loses the formatting when refreshing the pivot table)

Excel_screenshot1.png

I need a VB macro that reads each value in a Pivot table .. starting with the Col1, Row1 of the Pivot table .

It then matches the value in Col 1, Row1 to the Baseline value for Col 1 that is specified in (Yellow ) .

Note : The Baseline values are not part of the Pivot table area

If the value in in the Col 1, Row1 is less than the baseline value for that column at the top ,it formats the font color of that pivot table cell (say to red) It then moves to read the value in Col 1, Row2 and does the same check .

Once it completes the check on all values in Col 1, it does the same with Col 2 (where the values are compared to the baseline value for Col 2) ... and so on until all the colums of the PIvor table are validated in the same manner .

View 1 Replies View Related

How Can I RETAIN Formatting In A Pivot Table

Mar 21, 2007

My data has various dates in column A, which I group into months using the formula "=DATE(YEAR(A2),MONTH(A2),1)" in column B. Then I format column B to show the results in the format mmm-yy. So far so good.

I then use a pivot table to count the number of entries for each month and I have formatted the date column the same way. But every time I refresh the data (which I need to do frequently as data floods in from external sources), the format of the pivot table reverts to dd/mm/yyyy and I have to go and manually reformat it again.

I've checked all the options I can think of, but cannot find any way to keep the format as I have set it. Does anybody know of a way?

I'm using Excel 2003 on Windows 2000 Professional.

View 9 Replies View Related

Pivot Table Formatting Of Month

May 8, 2007

I am having difficulty with the pivot table I created in that the name of the month is showing the serial number. In my spreadsheet, the data I have is:

cell B3 = 20070501
cell P3 = 05 { formula =MID(B3,5,2) } {}*not an array formula
cell Q3 =May {formula =DATE(2000,P3,1) }
custom formatting in cell Q3 with MMMM to retreive name of month

In my pivot table, I would like the name of the month "May" to be displayed but 5/1/2000 is appearing. What am I doing wrong? Must I always format my data in the pivot table to return the name of the month? Perhaps someone in the Excel spectrum knows of a better solution.

Thanks to anyone who can guide me to sanity.

View 14 Replies View Related

Pivot Table Number Formatting

Dec 5, 2009

Whenever I make one with numbers, I get formatting for a number as below

1234567.78(no commas and 2 decimal places)

I normally want the formatting as 1,234,568 (comma inserted, no decimals,), (the last digit is changed just becasue of round off, other wise number in both cases is same).

Now I can double click the field, goto number--> number and then apply this formatting.

My question is whether there is a setting in excel somewhere so that this formatting will come as default (after I create the pivot table each time)?

View 6 Replies View Related

Formatting Pivot Table Fields

Jul 20, 2009

I'm trying to loop through all pivot fields in a table and change the format to be 0 decimals and comma seperated.

Here's my

View 3 Replies View Related

Conditional Formatting In Pivot Table?

May 15, 2012

I am using Excel for Mac 2011. I am trying to conditionally format the cells that apply to each row in the table with the exception of the grand total (listed as the bottom row). Depending on the filter applied by the user, the number of rows can go from 1 to 10. I have seen where some people have applied based on whether the cell showed a sum of some component in the source data. I am looking for this within the Mac version and have not found it. Do I need to write something in VBA to format it after refresh?

View 1 Replies View Related

Formatting Row Labels In Pivot Table / Chart

Apr 30, 2014

Was working on this problem for a poster: [URL] ......

I can't seem to get the pivot table/chart to format exactly as I desire. It seems that as soon as I add 'group by hour and day' Excel forces the formatting to AM/PM and I want to keep it military. I want to group by hour, so that data that occurs at 6:00 and at 6:30 are grouped, and I had to group by day so that 6:00 on 1/1 was separated from 6:00 on 1/2.

Attached is a worksheet which shows the desired chart format (not a pivot chart), and the attempted pivot chart. I want the pivot chart to match the 'simple' chart in look and feel. Any attempts to change the formatting of the row labels to 'h' is promptly ignored by Excel.

Note the two tasks that occur at hour 18 (one at 18:00 and the other at 18:20 (you will need to see the formatting to truly see the minutes)). Those should be combined in the pivot table (and they are) and on my 'adjusted' table (where I used SUMIFS).

View 2 Replies View Related

Pivot Table - How To Clear Formatting And Just Get Contents

Apr 22, 2014

How do I clear the pivot table formatting? I want just the content of the pivot table, but can't figure out how to get rid of the formatting?

View 2 Replies View Related

Copy Pivot Table Values And Formatting Only

Aug 27, 2009

In Excel 2007, is it possible to copy & paste a pivot table, and have the result look like a pivot table, but not actually be a pivot table? I want to keep the values and the formatting (the colors and borders, etc) but I want it to not actually be linked to the data or have the ability to change with dropdowns, etc. I've tried the usual copy & paste special (values) thing, and the other otions in the paste special box, but it doesn't keep the formatting.

View 10 Replies View Related

Conditional Formatting Rows In Pivot Table

Mar 25, 2014

I have a pivot table which shows below... I need to set up a conditional format to highlight the row where all fields are "0"

Company
Deals
Opps
Days since Deal
Days since Opp
Days since Meet

Co 1
1
7
80
20
20

Co 2
0
0
0
0
0

Co 3
1
4
30
30
28

Co 4
3
3
30
30
37

View 1 Replies View Related

Maintain Source Data Formatting In Pivot Table?

Nov 20, 2010

I have some source data which is used to generate a pivot table. The data is conditionally formatted to color certain cells based on some other values. Once the data is transferred to the pivot table this formatting (as well as the number formatting) is lost.

I have found some code to fix the number formatting issue but can't seem to locate something similar to set the interior color of the cells in the pivot table to match that of the original source data.

View 2 Replies View Related

Pivot Table Grouping By Date - Formatting Inconsistency

Apr 18, 2014

It's a given that formatting doesn't alter underlying values in all areas of Excel, merely changing the way cells look. But in the attached I show two pivot tables using exactly the same data with the sole exception that the first one has the date numbers formatted as numbers whereas the 2nd PT has the date numbers formatted as dates.

With the 2nd PT it will accept the Group by month functionality whereas the 1st PT won't.

On the face of it PTs seem to take more notice of the way a number is formatted when it comes to grouping rather than treating the number as a date which it can group.

View 1 Replies View Related

Macro To Draw Border And Set Formatting In Pivot Table

Apr 13, 2012

I came across an issue on the pivot table after refreshing data. I always need to manually redo the border and formatting. I figure that it is because every time when some new group have move to another day, it change the pivot table layout again and so on.

1) I manage to draw border for Day 1, 2, 3, 4 and 5 but 'Beyond Day 5' i dont know how to do it.
2) Sometime some Day X will have no data then i will have problem with my script. (example pivot table doesnt show Day 2)
3) Possible to do looping for that?

I had attached a simple file.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved