I would like to use a pivot table to manipulate my data. However, I need to be able to select data within my data set by a range of dates (usually a week). Is there a way to use a pivot table but reduce the data set by a user enter range of dates?
The date field is the first column in my data sheet.
I have a workbook that contains 52 spreadsheets (one for each week of the year). Each contain the same column headings. The columns contain both numberic and text data which I need to pivot. I can individually pivot each sheet to obtain weekly data but I would like to obtain year to date data throughout the year. How can I merge all of my 52 sheets together to utilize just one pivot table.
View 6 Replies View RelatedI have a checkbook register set up in Excel, and I really like it. I thought it would be good to set up a pivot table to organize all of the entries into an expense report. I have done this for over a year now, and I love everything about it, but here is the problem:
Now that I am getting so many entries, I thought it would be a good feature to limit the pivot table to a date range. I created 2 entry cells at the top of the pivot table to put a start and end date. I would like the pivot table to compare the entries in the register to the dates, and only include the entries between those dates. How do I do this?
there are a multitude of issues with US date formats when you're not in the US but I've run across one that I can't figure out.
I have a source table that has approx 5000 lines on it, everything looks correct and all the dates are in the correct (Australian) format. However when I use it to make a pivot table, any dates that are before the 12/m/yyyy gets changed to the mmddyyyy format in the pivot table only, all the source dates are still correct.
I have just created a pivot table, however, i have just put the range to the cells that have data in them. The problem is, is that i want to make the cell range bigger, but the cells that i want to include do not have data YET, but will in the future. I have tried creating the pivot tables including the cells with no values, but it ends up puting 1 into the pivot tables cells for some reason.
View 9 Replies View RelatedOn a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I have a sheet that is a download off of another system every month which means that the number of rows change from month to month. I have a pivot table of this data as well but I want it to change it's data range as it changes month to month. I have a Formula in cell C1 that defines the range, the formula is ="A5"&":"&"S"&B1 {B1 being the =COUNTA(A:A)}
Which yields A5:S31. Logically the way I thought this would work is by setting the Pivot Table range to : =Indirect(com.jdedwards.jas!$C$1) But this is not allowed as the range in a pivot table must be more than two rows. The second thing I tried was naming the range. I went to insert->Name->define and set the name to "Download" and the range to =Indirect(com.jdedwards.jas!$C$1). it didn't give me any errors but now I don't know how to set the pivot table to that named range and i don't even know if that is really going to work.
I need to read consantly changing shift time/ covered data from a Pivot Tables pivot chart and populate this data into number of shifts covered/ uncovered. This information is then put into a chart over a 24 hour period (from 0700 to 0700). I have been populating the data from the pivot chart by hand by referencing the number of shifts in the covered line and dragging it to correspond to the shift time data part. I then have to do this for the uncovered shifts. As the data in the pivot chart is constantly changing, i need to do this data ransfer 'automatically'. I have started to look at and learn VBA, but i am getting nowhere fast. I enclose a worksheet (blank) to give you an idea fo what i am trying to do.
View 4 Replies View Relatedfind the data Attached. I have 3 work books which contain logged, issued and cancelled data stored in different work book. There are two common fields like Location & segment in all the work books whcih are common. I want the data in a sequence by which consolidation should happen for location and the segemnt should be a page field and datas are arranged accordingly. I am attaching a work book.
how to do this in multiple consolidation of ranges in pivot or any other way.
I have a range of data that is added to constently. I named the range "Download" and defined it as =Indirect(Sheet1!B3) where Sheet1!B3 has another formula which produces the range of the data. I want to apply the named range to a pivot table so that when it updates, the range is updated as well but i'm not sure on how to do this. I put the word "download" in the range input of the pivot table wizard but it results in an error and doesn't complete. how can i set the pivot table's range to the named range that I defined?
View 5 Replies View RelatedI have 3 tabs in my spreadsheet that I want to combine in a Pivot Table. All 3 tabs have the exact same headings in Columns A-J. I want to create a pivot table to pull in all the data from the 3 tabs while using the Current Column headings to create the pivot table. But the pivot table wizard is only giving me "ROW" and "COLUMN" which does not allow any flexibility to create the table the way I want and move the various column data around.
Is there a better way to Pivot Table data from the separate tabs? My data on each tab is changed weekly and I was hoping to just update the pivot table when the data changed..
My boss asked me to format a pivot table like this with irregular ranges:
I've had a crack (as seen below and have gotten everything right except the strange group irregular ranges. I'm stumped! I'm not sure if pivot tables even have a function for irregular group ranges.
My raw data looks like here is its layout:
attached is a spreadsheet 6 people in my area use daily(ive copied and pasted the sheet in question to a new worksheet, as the file was too big). Ive been trying for about 3 days now to make a pivot table to summarise this data.
View 6 Replies View RelatedI have looked and experimented on how to include multiple ranges on a pivot table in excel 2011, i have found how to to it with the wizard but i can not find the wizard.
How to separate the ranges in the selection box? They are going to be going across sheet is that makes any difference.
i have a spreadsheet containing to columns "Date from and "Date to". the sheet is recording the attendance of staff. how can i create a pivot table to display how many days staff attend across months. i cannot us the first date "date from", as this will display all the days attended
View 4 Replies View RelatedI am having issues grouping dates by month in the attached example. The date field is formatted as text. When I attempt to group in the pivot table, I am not given the grouping dialog box. I can't figure out why.
View 8 Replies View RelatedI've got a database view that holds data for over a year, i use a - 2 day rule to show net data, for example
todays date is the 31th 5 2007 if i show data up untill today it will be gross data, so i use the -2day rile to show the net data,
the way i do this is in a pivot table i hide the last 2 date.
I have a DTS package the refreshed the Pivot table but i'd like also to have a macro or maybe vba script to ide the
2 last days this will have to happen every day so for to day it will hide the 30th and 29 tomorrow it will show
the 29th and hide the 30 & 31th. I still need to have the data for the 30th & 31 in the drilldown as some people work with
the gross data so i can't just make the change inthe database i wish it was that easy. At the moment i go in to the
pivot table and Highligh the last 2 days. i'd like a way of doing this automically.
I have a pivot table and and struggling to group these by month as well as to sort thee in escending order.
Pivot Table ABC3Row LabelsSum of DebitSum of Credit
413/02/201334367.1822844.19513/03/201326475.492219.66613/08/201230307.613541.2713/09/2012
18898.0318065.4813/10/2012 7210.52913/11/201241969.041767.821013/12/201232844.7724041.26
Cells in row C have numbers (number of days between date a and date b)
I want to group the days so I can run a usable pivot table as follows:
Up to 7 days between update date and today (ie 1 week) 8-14 days between update date and today (ie 2 weeks) 15-21 days (ie 3 weeks) 4 weeks +
My attempt is as follows but only give two results and not 4?
=IF(OR(C2<=7),"1-7days",IF(OR(C2>=8,C2<=14),"8-14days",IF(OR(C2<=21,C2>=15),"15-21days","Over4weeks")))
I am currently working with a pivot table someone else created. The data set has dates only, in the correct format. The slicer has the dates categorized by month and excludes the dates in which there was no data.
Here is my problem: I added a few new months of data. Everything is calculating just fine in the Pivot table. However, my slicer where I should be able to pick the month now has these months listed as all their individual dates. I want to put the December dates under "December" and so on. The data that was present before I loaded anything additional still has this feature.
How do I group these dates, to be able to them as months? By the way, the grouping function is grayed out.
I have a large spreadsheet which lists individual dates over two years and circulation figures next to each date. Sometimes there are two entries for a particular date e.g. 1/10/08 there were 150 readers of magazine A and 200 readers of magazine B. When displaying this on a graph it give a bar for each day, whereas I would like a bar for each week.
Is there a formula to convert the individual dates into weeks and then total the circulation figures for that week?
Column A = Dates
Column B = Circulation Figures
I have been using Excel to display, sort and present data in a professional way. I have created a pivot table with two columns below. Column C indicates the start date. Column D indicates the completion date. Blank cells show live data. I need to determine the number of days. 1) That have been - completed - a) That were < 2 Days, b) >2 but less than a week, c) > than a week (all). I have used the following formulas. a) countif(D4:D61, "<3"), b) countifs(D4:D61, ">2", D4:D61, "<=8"). Easy for completed data. My problem is, how do I determine the number of days, live data that following the same queries as above. I have figured out I can use countif to count the number of blanks by - countif(D4:D61, "(blank)") but how to put it all together and what formula should I use. I am trying to use countifs or if statements but am totally lost.
Column C Column D
---------- ----------
06/01/2014(blank)
25/11/2013(blank)
13/12/201314/01/2014
27/12/201317/01/2014
27/12/201310/01/2014
I am trying to Auto filter on a pivot table "dates" via VBA coding.
Where:
Startdaycomp = 11-May
Finishdaycomp = 18-May
Rather then this showing all values between these dates, I was hoping to see only those two dates. This will enable my to compare weekdays for a Dashboard.
Is this possible?
I have a stripped down data source for debugging purposes. I only have 4 rows of data for test purposes. The dates are formatted as dates.
When I create the pivot table the dates become my column values. When I select the first date in the pivot table the Group By Field menu option is grayed out. I tried setting a tabular format but didn't work.
I am trying to group some dates in a pivot table.
Unfortunately I receive an error saying it can't group the selection.
I have done "text to columns" and made the cells - (date values) and I have had no luck.
As I am at work I can't use the HTML genie because it won't install but I have uploaded a dummy file to my dropbox which available from here [URL] .......
I pull this data from an Oracle POWER PIVOT and always have trouble grouping the dates when they come from Power Pivot. Currently working as analyst so figuring this out would make life so much easier as I could group by months etc.
I have a database of roughly 9000 rows. My first sheet is this data in a raw format (Masterdata!). Each row is a fire-rescue response call and therfore has a time stamp. The raw data uses different formats to provide the time stamp. My second sheet is my filtered data (Filtereddata!). In order to make these time stamps uniform I have a formula that looks at the Masterdata! timestamp column and if it is in a numeric format changes it to a text date and if it is a text date perserves it.
=IF(ISNUMBER(Masterdata!K:K),TEXT(Masterdata!K:K,"dd/mm/yyyy hh:mm"),Masterdata!K:K)
This gives me the "timestamp" which has both the incident start time and the date. I have =left and =right formulas breaking apart the date and the time. Therefore I have two columns on my Filtereddata! for the date of the incident and the time the call came in. What I would like to do is run some pivot tables and group incidents by month. I am unable to group them once I run the pivot table. I get a "Unable to group these items" (or something like this) message. I have assured multiple times that the date column is in DATE format. However, when I change the date to long date or short date I see no changes in the column so I am assuming there is something happening that I'm missing. The formula populating the date column on Filtereddata! is as such:
=LEFT(frfiltereddata[[#This Row],[Timecode]], FIND(" ", frfiltereddata[[#This Row],[Timecode]], 1))
I have a pivot table with dates along the x-axis. The data is spread out over 5 years and the spacing between sampling events is not even, therefore, the spacing of my x-axis dates is not even. I want the x-axis to look similar to a normal graph where there is equal space between each month, even if I don't have data for each month. I do not want to group the data to accomplish this. If I click the "show items with no data" it only shows one extra day, not all days or even all months. I have excel 2010.
View 2 Replies View RelatedI've a table of historical members status list. with this table, I could track each member status history, since the beginning they become a member.
Here is the short of table
Name
Member Status
Date
Adel
New Member
1-Jan-14
[Code] ....
I expect to use Pivot table to show how many people which are still "New Member" and/or "Junior Member" up to now. From the table above, there should be: only one person who still as New Member. because it is only Smith, and only two people with Junior Member. they are Adel and Jhon.
I've search around and found the following useful link, viewing only the last date in a pivot table for each user
also A quick way to return the latest date in a subset in Excel
How to know the last status of each user (each member in my case).
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest)
The problem is i will get "....A file name already exist...do you want to overwrite.." prompt.
Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
I manage a team that quote for business. They are targetted on number of quotes per month but then also wins per month, however a win may come a number of months after the original quote was generated.
They work off a spreadsheet where they log:
Quote date (And month)
Quote Value
... customer info etc
Win month (against orginal quote information)
Win value (against orginal quote information)
I started writing my pivot using the Quote month as the main reference point, IE Quote Month in the Row, and then put all the data in the central drop data section... However, there are two immediate problems with this:
They are targetted on quotes generated per month, some business won has come from last year, which they are lifting from the old spreadsheet and puttin in my new one... meaning that quotes they generated in Oct 2012 are now showing up as quotes for October this year.
If the wins span a number of months they are showing in January (if quoted in January) and not in March (when actually won)
Is there a better way of writing my pivot table??? There must be... ideally what I would like is half the table referencing the Quote date and half referencing the order date... but I don't know how to do this? I could probably do this with pages but I would like to show all on one sheet...