Latest Value In A Series Of Cells (not A Column Or Row)
Jul 25, 2007
am looking to find the most recent value in a series of cells that I define. I have set up a worksheet for each month and I want to only pull out the latest total entered for a particular cell reference (cell B16 in each worksheet has the number I need).
I tried using : =LOOKUP(9.99999999E+307,Jul:Jun!B16) but that just gives me a #value error.
I had a search through the archives too and found [url] and [url](neither of which I really understood or could use, although I did have a go), anyone got any ideas? Am sure it's very easy!
Just to clarify, I have 12 worksheets, each with a different month. Each month I enter data into the relevant worksheet. I want a running total on a summary worksheet and need to pull out the latest numbers automatically (they don't need to SUM or anything).
View 9 Replies
ADVERTISEMENT
Sep 2, 2007
in writing a macro that does the following.
Right there data in cell A1 lets say LTP BY001 and then the next data in column A is LTP BY002 in cell A9. What I need to do is copy LTP BY001 from cell a2-A8 and then LTP BY002 From A10 until LTP BY003 appears lets say A15. Therefore need LTP BY002 copying from A11-A14. I need that to go right the way down the workbook at everytime their is a number change.
View 6 Replies
View Related
Jun 6, 2014
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
View 6 Replies
View Related
Nov 14, 2012
I need a formula to find the latest date (Column A) a given value appears in Column B.
Column A is a list of dates.
Column B can contain any of 6 values (For example: A, B, C, D, E, F).
And, to make it even more fun, the system I'm working on doesn't allow macros.
View 2 Replies
View Related
Dec 21, 2012
I'm working on a project with tables. I'm not sure if I can use a function or I have to vba. I want to retrieve the lastest 5 entries for a specific column (column AA), but not blank ones. Then I want to retrieve latest 5 entries for column AC. On a seperate sheet I want the entries to be seen in order and I want it to change as new data is entered into the table. In the end I'll have the latest 5 entries for Internal (Column AA) and then after that the latest 5 entreis for External (Column AC).
View 3 Replies
View Related
Oct 9, 2009
I need a macro that can jump to the nearest current date in column B from anywhere on the current tab. all the dates are in 10/09/2009 format, and the actual date of today might not be in that column. This can be + or -1 one day search from today. After this macro run's the nearest current date will be the active selected cell in column B.
View 9 Replies
View Related
Jan 6, 2009
Having problems with the following:
First Column Second Column Cumulative (B-A)
1 10 9
2 20 27
3 30 54
4 40 90
Every day,a new row is added and i want a formula at the top of the sheet to show the latest figure in column C.
View 2 Replies
View Related
Jan 9, 2014
I need a VB Script or Excel tip to Locate the latest value in the column.
Example1
Value
1
2
3
4
5
6
Latest Value
6
Example2
Value
1
2
3
4
5
Latest Value
5
Note: I have 1 Row and 'N' Column. Column may have null value, which need to be ignore as mentioned in the example.
Also., if in future new value has been entered in the column then the Latest value has to be updated automatically with the new value.
View 6 Replies
View Related
Aug 19, 2013
I made a data entry user-form on my file which is find the latest row of the sheet and input the data to the next row in columns "A" to "E", What I need is copy the formula from the previous row to this row in columns "F" to "L".
Here is the code of the user form:
Private Sub CommandButton1_Click()
Dim ssheet As Worksheet
Set ssheet = ThisWorkbook.Sheets("Data")
nr = ssheet.Cells(Rows.Count, 1).End(xlUp).Row + 1
ssheet.Cells(nr, 1) = Me.TBDate
ssheet.Cells(nr, 2) = Me.TBOpen
ssheet.Cells(nr, 3) = Me.TBLow
ssheet.Cells(nr, 4) = Me.TBHigh
ssheet.Cells(nr, 5) = Me.TBClose
End Sub
View 4 Replies
View Related
Jul 23, 2008
Bet this is simple to someone...
How can a continue this fill series down a column?
=$BC$3
=$BC$4
=$BC$5
=$BC$6
I would copy, paste and edit only there are 2500 rows!
View 14 Replies
View Related
Jan 6, 2014
I am working on a spreadsheet and I need values from Sheet1!a2, a7, a12, a17 etc...
I want to fill in the formula ='Sheet1'!a2 etc, to fill column A in sheet2!
When I highlight and drop down to fill excel fills the column in increments of five like i need but doesn't start on the right one. Instead it fills the formula as ='Sheet1'!a6, (For cel A1) and ='Sheet1'!a11, (for cell A2) and so on.
View 14 Replies
View Related
Aug 23, 2007
I have a large datset that looks like this:
++++++++++++++++++++++++++++++++++
+ + A + B + C +
++++++++++++++++++++++++++++++++++
+1+ ID + EventDate + EventType +
+2+ 111 + 1/1/1995 + Visit +
+3+ 111 + 1/30/1995 + Vaccine +
+4+ 111 + 4/22/1998 + Visit +
+5+ 222 + 7/7/2000 + Survey +
+6+ 333 + 8/8/2001 + Labs +
+7+ 333 + 8/22/07 + Pharmacy +
+8+ 333 + 8/22/07 + Visit +
I would like to shade the rows with alternating colors so that all the data pertaining to a given ID can be easily spotted. In the example above, I would need A2:C4 to be shaded one color, A5:C5 another color, and A6:C8 the first color again.
I am using Excel 2007.
View 10 Replies
View Related
Jan 10, 2014
I am trying to use the auto fill series but I need the series to start over every time the value change in another column.
If i use the auto fill series, it will copy 1,2,3,4,5 and so forth til the end of the column. In this case, i need the auto fill or some other function that will restart once it encounters a different value under the ID column. I've started below to show an example.
IDNo
0.11141
0.11142
0.11143
0.1121
0.1122
0.1123
0.1124
0.1125
[code]....
View 4 Replies
View Related
Aug 4, 2014
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
View 1 Replies
View Related
Dec 22, 2011
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
View 4 Replies
View Related
May 31, 2008
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
View 4 Replies
View Related
Feb 5, 2014
I want to run a series of cells but how to do it. E.g.
Cell A1 to contain the data 2A
the next cell (A2) to read 2B
the next 2C etc etc
I've tried just dragging the cells down but it just duplicates 2A, 2B, 2C whereas I want it to fill the next cells as 2D, 2E etc
And I've tried using the fill series option but neither seems to be working (presumably due to the letter).
View 4 Replies
View Related
May 9, 2012
I have a column:
LABEL COUNT
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 16
15 empty cells
I need to fill the empty cell with the "series" (2 of 2, 2 of 16, 3 of 16). This is just an example of data - there are all different series - 1 of 12, 1 of 5, etc.
Anyway - was hoping to highlight the whole column and be able to auto fill instead of having to extend each series. I have tried straightforward fill series which doesnt work of course. I have tried go to special - blanks but cant find right combo to make it work.
Will it work or do I have to either do manually or with a macro?
View 2 Replies
View Related
Jul 10, 2014
I need to fill multiple number series in the same column. Example:
Have
Want
1
1
[Code]....
View 3 Replies
View Related
Aug 21, 2006
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
View 9 Replies
View Related
Jun 24, 2008
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
View 2 Replies
View Related
Jun 16, 2009
I want to take the average of cells D3:D8 from worksheet 1 and put that answer in cell D1 of worksheet 2. After that, I want to take the average of cells D9:D14 from worksheet 1 and put that answer in D2 of worksheet 2. Average of D15:D20 from worksheet 1 and put the answer in D3 of worksheet 2, etc. etc. etc.
View 3 Replies
View Related
Oct 1, 2007
I'm trying to figure out a way to have a series of cells at the top of a spreadsheet that when a button is clicked, the data is sent to the bottom (or next available) open cells at the bottom of a table list. So essentially, a form that sends data to the bottom of a table or list.
View 14 Replies
View Related
Mar 26, 2007
Is there a way to copy a series of cells from top to bottom, then paste them back so the would be bottom to top?
View 9 Replies
View Related
Sep 5, 2006
is it possible to copy various cells from one worksheet to another. I have a cover sheet holding various jobs for different individuals, data validation has been used to set up various drop downs for the peoples name etc. On selection of an individuals name i was wondering could various cells on that row be copied into a seperate worksheet with that individuals name being the tab name? I have tried using the " Lookup" function but im not getting too far.
View 8 Replies
View Related
Apr 29, 2009
I have a series of numbers in one column. Is there some way I can divide all the numbers together by, say 10, without doing it manually?
eg.
12
15
15
25
20
should become
1.2
1.5
1.5
2.5
2.0
Is there a way in Excel to do that?
View 3 Replies
View Related
Aug 14, 2009
i need to write a formula that spits out the average of a series of numbers when (if):
every time "CAD" appears (column A) it takes the numerical figure of the cell directly to the right of it (column B). the data is arrange vertically, e.g., the range of "CAD"s is all vertical (column A), about 200 entries.
is there a formula/function that takes data from the columns completely adjacent to one another?
View 11 Replies
View Related
Jan 19, 2013
Using Excel 2010. I have a Column Chart that shows 3 data series by month for one year
How can I customize the chart to group the data series on the X-Axis and repeat the 12 month series 3 times on one chart with one X-Axis to show each data series as a group?
View 5 Replies
View Related
Feb 15, 2007
Im plotting data on a Line-Column 2 Axes Chart which works really well with 4 data series (2 column, 2 Line) but when adding a fifth data series, the fourth disappears from view. I can see its still there cos I can display the values but I cant get the line to appear. The values for the 5th series are also similar to other series values so its not like the chart cant display it....are there limits to the number of series on such a chart?
View 9 Replies
View Related
Jun 19, 2008
I have a column with (for example) 5 entries A1, A2, A3, and so on. I would like to pick up this data, tranpose it into a row, put it on the 2nd sheet, but (again for example) be specific about where i want it to go. I may want to have A1 at B2, A2 at E2, A3 at H2, etc
-A B C D E F G H
1x
2y
3z
4
5
becomes
-A B C D E F G H
1
2 -x - - y - - z
3
4
5
View 9 Replies
View Related
