I have a spreadsheet that has staff id in one column and the work items number that they have done in a daily basis in another column.
The actual list is very long. I need to summarize in another column how many work items that they have completed in a daily basis.
I have attached a sample spreadsheet as an example. I would need to summarize in column H based on the staff ID. Some work items are shared by two staff but it will have to be counted as one work item completed for each staff. If work item B123466 is completed both by staff M56 and M54, then it will be counted as one for each.Currently, I am doing this manually with the filter function which is very tedious and often has mistakes. I would like to formularize this task.
I only want the formula to operate when there are values to calculate and then ONLY refer back to the last calculation. If there are gaps between the calculations I would like those to remain blank. Is that possible? I have attached an example of what I am trying to do.
I have a number which consist of 12 digits such as 765432123345. The first two digits denotes the year. I need to create a formula in the next column to calculate the difference in years by comparing to the current year of 2013. In this scenario, the difference will be 37. Is there a way to do this?
We typically give out Free Rents (usually a few months) to our tenants, which is always up on the front. And then we would charge a rent increase ($.50 per year in the example) starting 12 month after the rent free rent ends and every year (12 months) afterwards. The rent will be flat between each increase. My questions have two parts:
1. Is this something array formula can handle in one formula?
2. Since I am not an expert on array formula, what I ended up doing was to create a line for "Rent Bump Date" which is defined as the Free Rent + 13 for the 1st rent increase (meaning if you dont get free rent you would start paying increase in month 13 and every 12 months after. And I put in what the rent would be for each rent bump date. My solution is if the rent for each month (1 - 240) would be determined based on the ranges of those bumps. For example,
I am working on my companies tax reports for the first time. The wages for unemployement and FUTA do not calculate IF the total wages are over a certain amount.
Im trying to get the formula to see if the total wages are over $7000 then dont calculate. Ive tried several different things from the links, but still can't make it work.
total wages are $7800, so i only need to calculate it on $7000 and then not calculate it again for the next quarter.
I want to calculate the sales rank of the customer whose CUSTOMERID is equal to my ID? Note that sales rank is what position the salesperson is in terms of DOLLAR VALUE OF SALES.
Just a bit stuck on this. How do I calculate the rank? Is it a If statement or a Vlookup Question?
The spreadsheet can be found here: http://www.megaupload.com/?d=5D0YCHIG (It's too big to be uploaded to the forum hosting).
Need a way of getting one of 4 values in sheet 2 to perform a calculation with. The aim is to show the total volume of a given item. Because there are four data sources for the actual volume (with varying degrees of accuracy) I've incorporated all of them in one sheet but want to use the values in precedence i.e. the first figure is where I've had someone physically tell me how many fit to a pallet (cubic metre) and know that to be accurate. If the value there is 0 I want to use the next figure as certain other items were measured physically. Column three and four are from some legacy systems and therefore should only be considered if the figures are 0 in the first two columns. Rather than ramble on any more I've attached a sample sheet
I am trying to create a sheet which will automatically calculate data based on laid down criteria.The criteria are as follows:
Cab Type in cell () Indica
If the value of cell () is less than or equal to 40Km then cell (B3) will be 400.
For every extra km above 40 the cell value in cell (B2) will be extra km done multiplied by 8 in cell (D2)
If the value of cell () is greater than 40 but less than or equal to 80 then cell (B3) will be 800
For every extra km above 80 the cell value in cell () will be extra km done multiplied by 12 in cell (D2) Cab Type in cell () Indego
If the value of cell () is less than or equal to 40Km then cell (B3) will be 600.
For every extra km above 40 the cell value in cell (B2) will be extra km done multiplied by 14 in cell (D2) If the value of cell () is greater than 40 but less than or equal to 80 then cell (B2) will be 1200
For every extra km above 80 the cell value in cell (B2) will be extra km done multiplied by 16 in cell (D2)
Ther are about 5 different types of cabs in the sheet.
Cab Type Provided Total KM run Basic Amount Extra km
What I want to achieve is as under:
1. If value of cell A1 = Indica and value of cell B2 is entered as 40
Then the values of cells (C2:e2) should populate automatically as 400, 0, 400
2. If value of cell A3 = Indica and value of cell B3 is entered as 40
Then the values of cells (C3:e3) should populate automatically as 400, 40, 440
I have a long list of work items based on a 7 digit number. The work item is referenced by a code named DS or WU.Example as below and the work item# has duplication throughout the list.(work item # repeated)
I need to create a formula that counts how many duplications of work items, by the number of DS or WU. Based on the above example, the formula should arrive at the results below
attached is an example of a timesheet we use. now after lengthy discussions the comany say its not 'in their interest' to use acess so i'm stuck with excel on this one.
I need to sum a column on many critiera, which i feel maybe a job for the trusty old =SUMPRODUCT. But thing is i need to sum a column based on a date range, Rate, Day.
I have manually typed in the number i think it should produce but as far as formulas go
1st off need to calcualte date range, which is situated on the top of the spreadsheet. 2nd some how tell the formula that Normal overtime is either classed as rate 1 Saturdays classed as 1.5 and sundays and bank holidays classed as 2.
I have long series of data in 8 columns (B, F, J, N, R, V, Z, AD) starting at row 5 down to row 86404. I want to find the total median for each row, where a condition is met for that row. The condition is if number>10 and the number is located in row 3 for each column (i.e., B3 for column B). So, if B3, J3, R3 are all >10, then I want to find the median for all the numbers in the columns B,J,R.
I assume there is an array formula that could do this? I've tried a few solutions with no luck.
I'm trying to design a Profit and Loss template that calculates off an accounting software data dump. I will attempt to explain the problem here but I have included a summary in the linked workbook which would be easier.
DOWNLOAD WORKBOOK: [URL]
I have two problems:
The Formula: Basically, I need to calculate every cell in the Profit and Loss statement based on the below criteria: The Profit and Loss item accounts, e.g. Gross Income has 6 accounts. There is a reference table for these - so incorporate index match/vlookup? User selected data from 4 combo boxes.
I am thinking a SUMIFS formula (using the combo box values) and somehow combining a vlookup to pull the items accounts. I'm starting to think that VBA is the best method?
Tweaking: The attached workbook is a small example. The full data dump contains 60,000 rows.
I'm trying to calculate a multi-variable equation based off of data in a table with different criteria. If you reference the attached spreadsheet I am trying to calculate cost based on weight and zone. For the data entered in cells B1 and B2 944.01 would be the cost. If you look at the table in G2:N3 you'll notice that the values in G2 and G3 are the weight limits G2 is from 0-4999 and G3 is 5000+, this should impact where the value in B1 falls. B2 should select from H1 to N1.
For example key 20 has a min fee chargeable of 100, however a fee is chargable based on performance as follows:
Fee Range 10-9999 Fee Range 210000-19999 Fee Range 320000-29999 Fee Range 430000-99999999
So key 20 gets charged 0.1% of amounts between 0&9,999, 0.2% of amounts between 10,000&19,999, 0.3% on amounts between 20,000& 29,999 and 0.4% on the rest.
How can this be combined into a lookup/range/low-high formula to extract the correct values????
I would like to have something that looks like a running total, but isn't.
I have in a colomn 'rate' and after that a column for each month in a year. I would like to have at the bottom a total cost, so rate x hours. have a look at the picture.
is there a formula for this? ratemayjunejuli $10 2,02,01,0 $12 2,03,00,0 $10 3,02,05,0 $15 4,02,53,0
I am looking for a formula that can change the price of some of the items on sheet1 in column C by the amount found on Sheet2 in Column D. I would like it to base the calculation on column C in sheet2 (so I can choose if I want to add, subtract, multiply, divide, or make the price exact). I would like all prices that don't match these UPC codes to remain unchanged.
Intended Results can be seen on Sheet1 in Column E. Not sure if I should a formula with the Vlookup function or a macro, or maybe there is even a better solution.
Example spreadsheet may be viewed at http://spreadsheets.google.com/ccc?k...WLMyhNJLiPLTfA.
i am trying to make an excel spreadsheet so i can keep track of my hours and pay at work... i know how to do mult and add but i wanted to know how to do the 2 together.... for example
Hours ST OT Total Hrs Gross Pay
8 2 10 ?
i would like help figuring out the gross pay if say for example my st time rated is 21.21 an hr, and the ot rate is 31.82 how can i get the 8 times 21.21 = 169.68 and the OT 2hrs times 63.64 to show up in the gross pay as a total of 233.32 - what would the formula look like?
I have in column A a list of investment fund names. In columns B to D is respectively for each fund its Market Value, the Rate of Return and the Rank (1, 2, 3 or 4). I am trying to create a formula that will calculate the market value-weighted rate of return for each ranking.
For example, the 3 funds that rank first have market value weights of 10%, 12% and 13%, and rates of return of 1%, -3% and 5%. The total market-value weighted return for the top-ranked funds would therefore be 0.39% (i.e. 0.10*0.01-0.12*0.03+0.13*0.05)
The formula would first need to look in the ranking column to identify those funds with a particular rank (column D), then calculate their weights by dividing their market value by the total market value of all funds (column B), and finally multiplying these weights by the rate of return (column C), before summing the results to say, for example, that the total market-value weighted return for the top-ranked funds is 0.39%
I have a file to calculate bonus based on productivity. The bonus percentage is dependant on productivity percentage and the category of employee. I have given in the below attached file, the range of productivity% and the bonus % for each category. I want to build a formula, to get the bonus % in a seperate table. I tried to do the same using "If" condition, but its not working, as the number of nested IFs are going beyond 7. I have highlighed the column where I want to calculate the formula.
I have a form in work which acts as a tick sheet for tasks complete on a construction site. When a task is complete I copy & paste from a key of dates i.e. week ending 11.05.15, this allows me to see what week a task was complete.
Generally I only marked off tasks which were 100% complete but my manager wants me to enter the % of the task complete also, i.e. 80% in the box.
So my question is how can I have the formula assume that any box with a date & shading is 100% and any cell with a number i.e. 80 is only 80% complete. I need it to monitor around 150 cells and give me the overall % complete based on what i have discussed.
When speaking with parents I want them to enter in their child's birthday i.e. 12/1/1998 in one cell and then automatically generate what grade they should be in the next cell. If the grade year cutoff date is Sept 1.
I've got a spreadsheet where the start date is amendable and this is what I wanted. E.g. start date is Jun-14 and I want the formula to to calculate annual salary divided by 12 in each month from June onwards until Mar-15 (Financial year is April to Mar) and the same way to not show anything in April or May as they started in June... How can i achieve this please as I tried IF statements and it doesn't recognise dates and years...
I am looking to setup a formula to calculate a Fee that is based on the number of users of a service in a month, with the rate varying by the number of users. The first million users in a month will bring in $0.40 per user, for users 1-4M it will bring in $0.30 per user, for users 4M-7M it will bring in .20 per user, and for users beyond 7 million it will be .10 per user. So for example, if a user count was 9 million in a month, the calculation would be ($0.40 x 1 million) + ($0.30 x 3 million) + ($0.20 x 3 million) + ($0.10 x 2 million). I know the answer to the problem is obviously $2,100,000 but I can't build the formula that solves that and can handle instances where the user count is capped in one of the individual brackets. (IE if there are 3.5M users)
I've attached an example spreadsheet : Variable Fee Schedule.xlsx
Basically a cell might have a number with 3 decimal places
For Example 90.554, and i will format the cell two 2 decimal places. But when i use those cells which are formated to 2 decimal places in a formula it produces results based of all the decimal places in that cell.
Is there a way for the formula to only calculate the results based off of what is shown in the cell? . This is messing up our accounting area by alot of dollars since we sell many items.
I included an example of what i mean in this excel file which should clear up any confusion.
I need to calculate the subscription amount based on the capacity of the wind mill.
The slab rates are as follows: 1. Up to 0.6 MW - Rs.3,000 2. more than 0.6 up to 3MW-Rs. 7,000 3. 3 MW up to 98MW -Rs. 7,000 for the first three MW and Rs.1,500 per MW in excess of 3 MW 4. Above 98 MW -Rs. 1,50,000
