I want to calculate the sales rank of the customer whose CUSTOMERID is equal to my ID? Note that sales rank is what position the salesperson is in terms of DOLLAR VALUE OF SALES.
Just a bit stuck on this. How do I calculate the rank? Is it a If statement or a Vlookup Question?
The spreadsheet can be found here: http://www.megaupload.com/?d=5D0YCHIG (It's too big to be uploaded to the forum hosting).
I am using the following formula to calculate due dates based on the rank i assign an issue.
Note: a similar formula is used for the due date of section one, but if it is not complete, i do not want this formula to kick in a determine the due date for section 2. The formula itself is working fine, but is giving a 'due date' of 1/30/1900. I was wondering if there is a way to not display anything if it has no number to calculate from.
=IF(ISNUMBER(SEARCH("S",D11)),F11+30,IF(ISNUMBER(SEARCH("B",D11)),F11+30,
IF(ISNUMBER(SEARCH("A",D11)),F11+30,IF(ISNUMBER(SEARCH("QNM",D11)),F11+30,""))))
Sheet1 *BMNO1GenderAge GroupTotalRank2Male6-72103*3Male6-71437*4Female6-71294*
I will have 200+ records similar to the above. I would like a formula that ranks the totals. The Males in the 6-7 Age Group would be in 1 Ranking while the Females in the 6-7 Age Group would be in another.
I prefer a formula over a macro. My original thought was =rank(n2,offset(?,?,?,?,?),1) but alas I'm missing something.
I have a large spreadsheet where I've successfully ranked a large series of data based on revenue, using product classification as a criteria & summarising this on another page with the top 20 products. The problem I'm having is that within certain criteria's I have some products with the exact same revenue figure, so if the 2nd ranked product within classification "C" for example has revenue of $100, & there's another product within the same classification also with $100 of revenue, on my top 20 report I have results for the 1st & 2nd ranked product, but a blank for the third product & then results again for the fourth
The formula I'm using is
=IF(Y12="NA",0,SUMPRODUCT(--(Y12=$Y$12:$Y$6000),--(AC12
I need to have excel dynamically rank items based on two criteria’s (category and sales).
For Example:
I have a list of items with its category in column A, column B has the sales information. I need to rank the items by category and sales, the data is not sorted and I cannot use a macros/VB.
I'm racking my brains as to how I can structure a formula to conditionally rank a value in an array against only those values in the array whose corresponding criteria cell includes a specific letter.
So for example I have a list of 12 values, say 126; 239; 0; 171; 162; 157; 130; 199; 122; 153; 0; 15.
Each of those values corresponds to a heading, say: CDE; DFE; FGE; DFE; ERD; DEA; BDF; DFB; CDE; CEF; CAB; FAB. As you will note some of the headings may or may not be the same and may or may not include the same letters in different orders.
How can I write a formula that ranks in ascending order a given value drawn from the above list (which will be in another cell but which in this case is, let's say, the first value: 126) only against those values whose heading includes a specific character, for example the character C (the character in question will vary and be defined in a specific cell).
As an added complication I need the ranking calculation to exclude any zero values. So in the above example what the formula needs to do is rank the value 126 against a sub-set of the whole array comprising only the values 126; 122; 153; 0.
The answer I need is 2 because, discounting the zero value, 126 is the second highest value.
I'm trying to Rank a list and than re-rank the list while excluding certain (or by Criteria) items
Vendor Co
Cost Fee
Rank
Vertox
500
4
BV
1520
3
[code].....
I have a number which consist of 12 digits such as 765432123345. The first two digits denotes the year. I need to create a formula in the next column to calculate the difference in years by comparing to the current year of 2013. In this scenario, the difference will be 37. Is there a way to do this?
View 5 Replies View RelatedWe typically give out Free Rents (usually a few months) to our tenants, which is always up on the front. And then we would charge a rent increase ($.50 per year in the example) starting 12 month after the rent free rent ends and every year (12 months) afterwards. The rent will be flat between each increase. My questions have two parts:
1. Is this something array formula can handle in one formula?
2. Since I am not an expert on array formula, what I ended up doing was to create a line for "Rent Bump Date" which is defined as the Free Rent + 13 for the 1st rent increase (meaning if you dont get free rent you would start paying increase in month 13 and every 12 months after. And I put in what the rent would be for each rent bump date. My solution is if the rent for each month (1 - 240) would be determined based on the ranges of those bumps. For example,
Month 1-15 Rent $20
16-27 20.50
28-39 21
40-51 21.5
52-63 22
64-75 23
......
......
......
232-243 30......................
I am working on my companies tax reports for the first time. The wages for unemployement and FUTA do not calculate IF the total wages are over a certain amount.
Im trying to get the formula to see if the total wages are over $7000 then dont calculate. Ive tried several different things from the links, but still can't make it work.
total wages are $7800, so i only need to calculate it on $7000 and then not calculate it again for the next quarter.
I have events in column 1,in my sheet there are about 800 events.
In col 2. each contestant has a label,blue(b),green(g) or red(r)
In column 3 I want to print the % of blue + green of the total for each event,
e.g first event in attached sheet would show 77.7% down to row 10 in col 3 etc.
I have a spreadsheet that has staff id in one column and the work items number that they have done in a daily basis in another column.
The actual list is very long. I need to summarize in another column how many work items that they have completed in a daily basis.
I have attached a sample spreadsheet as an example. I would need to summarize in column H based on the staff ID. Some work items are shared by two staff but it will have to be counted as one work item completed for each staff. If work item B123466 is completed both by staff M56 and M54, then it will be counted as one for each.Currently, I am doing this manually with the filter function which is very tedious and often has mistakes. I would like to formularize this task.
Need a way of getting one of 4 values in sheet 2 to perform a calculation with. The aim is to show the total volume of a given item. Because there are four data sources for the actual volume (with varying degrees of accuracy) I've incorporated all of them in one sheet but want to use the values in precedence i.e. the first figure is where I've had someone physically tell me how many fit to a pallet (cubic metre) and know that to be accurate. If the value there is 0 I want to use the next figure as certain other items were measured physically. Column three and four are from some legacy systems and therefore should only be considered if the figures are 0 in the first two columns. Rather than ramble on any more I've attached a sample sheet
View 4 Replies View RelatedI am trying to create a sheet which will automatically calculate data based on laid down criteria.The criteria are as follows:
Cab Type in cell () Indica
If the value of cell () is less than or equal to 40Km then cell (B3) will be 400.
For every extra km above 40 the cell value in cell (B2) will be extra km done multiplied by 8 in cell (D2)
If the value of cell () is greater than 40 but less than or equal to 80 then cell (B3) will be 800
For every extra km above 80 the cell value in cell () will be extra km done multiplied by 12 in cell (D2)
Cab Type in cell () Indego
If the value of cell () is less than or equal to 40Km then cell (B3) will be 600.
For every extra km above 40 the cell value in cell (B2) will be extra km done multiplied by 14 in cell (D2)
If the value of cell () is greater than 40 but less than or equal to 80 then cell (B2) will be 1200
For every extra km above 80 the cell value in cell (B2) will be extra km done multiplied by 16 in cell (D2)
Ther are about 5 different types of cabs in the sheet.
Cab Type Provided
Total KM run
Basic Amount
Extra km
What I want to achieve is as under:
1. If value of cell A1 = Indica and value of cell B2 is entered as 40
Then the values of cells (C2:e2) should populate automatically as 400, 0, 400
2. If value of cell A3 = Indica and value of cell B3 is entered as 40
Then the values of cells (C3:e3) should populate automatically as 400, 40, 440
I only want the formula to operate when there are values to calculate and then ONLY refer back to the last calculation. If there are gaps between the calculations I would like those to remain blank. Is that possible?
I have attached an example of what I am trying to do.
I have long series of data in 8 columns (B, F, J, N, R, V, Z, AD) starting at row 5 down to row 86404. I want to find the total median for each row, where a condition is met for that row. The condition is if number>10 and the number is located in row 3 for each column (i.e., B3 for column B). So, if B3, J3, R3 are all >10, then I want to find the median for all the numbers in the columns B,J,R.
I assume there is an array formula that could do this? I've tried a few solutions with no luck.
I am facing a problem with WorksheetFunction.Correl
I got information, that matching class properties of Worksheetfunction is impossible.
This is my first experience with macro's and I hardly know how to deal with this problem.I got some excel file from my friend and tried to do this in the same way.
Macro was supposed to calculate the Pearson's coefficient of correlation for orders from 1 to 100 of autocorrelation in order to calculate Q Box-Pierce statistic.Data is prices of stocks for some bank and correlation coefficient is calculated for simple returns on stocks.
I'm trying to design a Profit and Loss template that calculates off an accounting software data dump. I will attempt to explain the problem here but I have included a summary in the linked workbook which would be easier.
DOWNLOAD WORKBOOK: [URL]
I have two problems:
The Formula: Basically, I need to calculate every cell in the Profit and Loss statement based on the below criteria: The Profit and Loss item accounts, e.g. Gross Income has 6 accounts. There is a reference table for these - so incorporate index match/vlookup? User selected data from 4 combo boxes.
I am thinking a SUMIFS formula (using the combo box values) and somehow combining a vlookup to pull the items accounts. I'm starting to think that VBA is the best method?
Tweaking: The attached workbook is a small example. The full data dump contains 60,000 rows.
I'm trying to calculate a multi-variable equation based off of data in a table with different criteria. If you reference the attached spreadsheet I am trying to calculate cost based on weight and zone. For the data entered in cells B1 and B2 944.01 would be the cost. If you look at the table in G2:N3 you'll notice that the values in G2 and G3 are the weight limits G2 is from 0-4999 and G3 is 5000+, this should impact where the value in B1 falls. B2 should select from H1 to N1.
View 3 Replies View RelatedI have a list of names that come from another sheet. I need to rank these by score and have used this formula:
[Code] ........
These names compete within their class but also within the class I need to consider (rank) a second category for example No or Yes. Also all names could be competing in the Yes category or for example 7 in the Yes and 3 in the NO. This will vary and is based on entry in another sheet.
The format is Class (column B), category (Yes or NO, Column C), Name (Column D), Score (Column S) and Rank (Column T)
If I include an IF statement =IF(S33="Yes", at the beginning of the above formula then I get all the Yes ranked perfectly. Is it possible to rank the others with the NO consideration?
Need to rank by score1 in descending order and Serial # in ascending order. My biggest problem is to get the rank number to be consecutive. I have listed the rank I would like to see.
Score1
Serial #
Rank
90
146168
1
[Code] .....
How can I rank with 4 criteria that are ranked differently? (Greater/ lesser etc)
Ranking - Online Spreadsheets - EditGrid
I had a look into this, but I got a bit confused with how isnumber, big, small and rank actually work
Using Excel 2003.
I have a workbook with two tabs: Results (containing exam results) and Percentile (containing percentile rankings based on scores). There are different rankings for different exams.
I need the percentile ranking returned (on the Results tab) based on the exam result for each student. e.g. for exam M111 a score of 36 would return a ranking of 95, a score of 18 would return a ranking of 35, etc. I've attached a sample workbook.
how to rank values in one column based on criteria in another column?
For example: How do I rank Cells in Column A that only contain the text "AL" in column B?
COL...A....B
ROW
1......5....NL
2......6....AL
3......7....AL
4......8....NL
See the attached spreadsheet. I have people's names in cells A2:A5. These names have a rank value in cells B2:B5. What I would like to do is create a formula that sorts/orders the names in cells A2:A5 according to the rank in cells B2:B5. The results I would like to achieve are shown in A8:A11. I am aware of the "Sort" function in the "Data" drop down menu, but need to leave cells A1:B5 as they are.
View 2 Replies View RelatedI need to return the project codes for the project with the top 5 sales volumes within each Region for each product. If say, I have the following relevant columns (Project, ProdCode, Region, Sales) in columns A:D
View 9 Replies View RelatedI am building a football stat database which I am looking to put in an individual sheet which will search the other 20 sheets, collate the information and then display a top 5 ranking in each area. For example, this is our setup for the data:
Screenshot 2014-03-12 21.56.18.jpg
So what I want to to is have a separate sheet which will have a section for say over 1.5 goals %. The formula would go and retrieve all of the % results for each individual team. Then it would rank the 5 best teams and display the team name in the first cell and the % in the other cell.
I need to sort the material data based on the material rank but i can't use the 'sort/filter' function. Therefore, I used the VLOOPUP function. For some reason the vlookup formula is not working could you let me know what is the problem? see attchment.
View 2 Replies View RelatedI have date data in Column O, which appears like. At any given point in time, i would have such date data for 5 to 10 days, and I want to just assign 1 to first date, and next date to 2 and so on.
What formula (can i use RANK formula, and how) I can use to get the desired result. SEcond part of the query may require macro, so will ask later.
Basic Data Desired Output
Column O Column P
20-Jan-13 1
20-Jan-13 1
20-Jan-13 1
20-Jan-13 1
21-Jan-13 2
21-Jan-13 2
21-Jan-13 2
21-Jan-13 2
21-Jan-13 2
22-Jan-13 3
22-Jan-13 3
22-Jan-13 3
22-Jan-13 3
26-Jan-13 4
26-Jan-13 4
26-Jan-13 4
26-Jan-13 4
I want to rank a list of teams based on their win/loss record. The list is something as follows.
Team A0-3
Team B0-2
Team C2-0
Team D1-2
Team E2-1
Team F2-1
Team G0-2
Team H3-0
Team I1-1
Team J1-1
Team K2-1
The column with the actual score contains the formula, =INDEX('2009'!$C$3:$BL$3,MATCH($A4,'2009'!$B$1:$BJ$1,0)). I would like to rank the list to something like,
Team H3-01
Team C2-02
Team E2-13
Team F2-13
Team K2-13
Team I1-16
Team J1-16
Team D1-27
Team B0-29
Team G0-210
Team A0-311