I would like to have something that looks like a running total, but isn't.
I have in a colomn 'rate' and after that a column for each month in a year.
I would like to have at the bottom a total cost, so rate x hours.
have a look at the picture.
is there a formula for this?
ratemayjunejuli
$10 2,02,01,0
$12 2,03,00,0
$10 3,02,05,0
$15 4,02,53,0
total cost $134,0 $113,5 $105
I have three values. The Quantity of items, the cost per items and the cost for the entire order. In some instances I want to give my clients items for free so I need to lower the cost per item in order to keep the entire order cost the same.
In order to ensure we are on the same page let's use the following associations:
Y = Quantity
X = Cost Per Item
Z = Order Total
So essentially I need a formula that will automatically calculate the cost per item (X) when more Quantity (Y) is added in order to keep the order total (Z) the same.
Below is my data
Complexity Type
Name
1
2
3
4
5
6
7
Ali,Shaheen Sultan
8
34
34
6
0
0
0
Budati,Manoj Kumar
7
18
18
12
6
0
0
Based on above data if The Column heading is 1 then it needs to go to the below data and multiply by that value and at the end should give me the total for the person. note that the total time is captured in a different sheet.
Complexity
Times Complexity 1
1
1.00
2
1.41
3
2.03
4
2.92
5
3.19
6
4.10
7
4.65
Formula to calculate the YTD % ?
If A1= YTD 100% and B1, C1 ,D1 etc.. do represent the month of Jan, Feb, Mar...etc
What do I have to use for A1 to auto-cal Jan - Dec?
I need a formula to calculate a total based on two conditions.
See spreadsheet attached.
I am trying to set up a spreadsheet where all the sales manager will have to do is input the number of cars sold to determine what the total amount of commission will be for a salesperson. I have something set up so far, but need the spread sheet to do an if/then type thing where it will search the table, and produce the dollar amount for the number of cars sold based on the scale and the number in the # cars sold cell.
I've tried conditional sum, IF, goal seek, and all kinds of stuff to no avail. The spreadsheet is attached.
Need a formula to calculate a absolute total from a column of totals.
I thought this was simple, but the formula I made didn't work.
I am trying to calculate players ranking based on their weight categories and attempts total, e.g. Category (50kg, 69kg etc..) Rank should be calculated automatically the highest total value of cat. 50kg is 1st second highest is 2nd etc. However, if tow players or more within the same Category have scored same point ranking will be calculated based on Body Weight less comes first and if both have similar weight calculation will be based on Start # first player comes first etc..
Table:
Start #
Name
Body Weight
Team
Category
Total Point
Rank
1
Player #1
49.2
Team #1
50kg
75
I need to set up an easy to use spread sheet for my office. It needs to be able to calculate the running total spent of fuel, as well as include any discounts we get and then calculate our total savings.So basically, total spent and total saved.
View 3 Replies View Relatedway to put a simple formula in a colum that will apply to the entire column, no matter how many rows without having to physically copy it to the number of rows required?
View 11 Replies View RelatedI need a formula to check two times and count the colum figures.
example only:
countif(=>4:30:00 PM <=5:30:00 PM)*(11/12/06)
So, I need to count all cells with time between 4:30 and 5:30 with the date of 11/12/06.
Im trying to make a formula that lets you type in your current level, and then calculates how much XP you have remaning untill you reach the max level.
The way the forumla would need to work would be something like this:
(E10) Enter Current Level:
(F10) 37 (which is my current level)
F11 - would then add cells from C37 to C70 (calculating the total amount of XP required) and then display in (F11)
Being able to say if, then is far to cpmplicated for me in excel. I'm just trying to make this for a bit of fun and am sure one of you talented people can easily do this.
I have created a chart on excel for us to track daily sales but also to figure sales tax so we know what to send the IRS each month. We have been figuring the sales tax ourselves and
filling in the chart on excel but I would like to create a formula that
automatically does it for me based on total sales.
I need formula to calculate a fee based on performance. For example I have 4 unique keys with the following performance:
KEYPerformance
2010,000
2120,000
2230,000
2340,000
I need to work out how I can formula drive a fee calculation based on performance which is subject to different ranges:
KEYMin FeeFee 1Fee 2Fee 3Fee 4
201000.10.20.30.4
211000.10.20.30.4
221000.10.20.30.4
231000.10.20.30.4
For example key 20 has a min fee chargeable of 100, however a fee is chargable based on performance as follows:
Fee Range 10-9999
Fee Range 210000-19999
Fee Range 320000-29999
Fee Range 430000-99999999
So key 20 gets charged 0.1% of amounts between 0&9,999, 0.2% of amounts between 10,000&19,999, 0.3% on amounts between 20,000& 29,999 and 0.4% on the rest.
How can this be combined into a lookup/range/low-high formula to extract the correct values????
I have a spreadsheet that has staff id in one column and the work items number that they have done in a daily basis in another column.
The actual list is very long. I need to summarize in another column how many work items that they have completed in a daily basis.
I have attached a sample spreadsheet as an example. I would need to summarize in column H based on the staff ID. Some work items are shared by two staff but it will have to be counted as one work item completed for each staff. If work item B123466 is completed both by staff M56 and M54, then it will be counted as one for each.Currently, I am doing this manually with the filter function which is very tedious and often has mistakes. I would like to formularize this task.
Looking for a formula for total cost based on a list of hours for each employee and a table of rates for each employee.
Please see attached file : Formula.xlsx
I have a scorecard that looks something like this:
90% or greater=3
80%-89%=2
70%-79%=1
0%-69%=0
I need the "cell" to react accordingly and I'm lost.
I need a formula to calculate age today based on a person's date of birth. I used to know this but I have not used it for awhile.
View 4 Replies View RelatedI am looking for a formula that can change the price of some of the items on sheet1 in column C by the amount found on Sheet2 in Column D. I would like it to base the calculation on column C in sheet2 (so I can choose if I want to add, subtract, multiply, divide, or make the price exact). I would like all prices that don't match these UPC codes to remain unchanged.
Intended Results can be seen on Sheet1 in Column E. Not sure if I should a formula with the Vlookup function or a macro, or maybe there is even a better solution.
Example spreadsheet may be viewed at http://spreadsheets.google.com/ccc?k...WLMyhNJLiPLTfA.
i am trying to make an excel spreadsheet so i can keep track of my hours and pay at work... i know how to do mult and add but i wanted to know how to do the 2 together.... for example
Hours ST OT Total Hrs Gross Pay
8 2 10 ?
i would like help figuring out the gross pay if say for example my st time rated is 21.21 an hr, and the ot rate is 31.82 how can i get the 8 times 21.21 = 169.68 and the OT 2hrs times 63.64 to show up in the gross pay as a total of 233.32 - what would the formula look like?
I only want the formula to operate when there are values to calculate and then ONLY refer back to the last calculation. If there are gaps between the calculations I would like those to remain blank. Is that possible?
I have attached an example of what I am trying to do.
I have a report which has a list of customers, each customer has 24 columns which represent the payment history over 24 months. If a payment has been made for that month the date and time (formatted correctly) will be populated in this cell.
Each customer has a product name attached to it so a product can appear several times. I need is a formula that shows the total payments recieved for a particular month for a particular product. For example.
I have managed to create the following flag which works a treat, it picks up a date an account was set up but looks at 1 column.
I have in column A a list of investment fund names. In columns B to D is respectively for each fund its Market Value, the Rate of Return and the Rank (1, 2, 3 or 4). I am trying to create a formula that will calculate the market value-weighted rate of return for each ranking.
For example, the 3 funds that rank first have market value weights of 10%, 12% and 13%, and rates of return of 1%, -3% and 5%. The total market-value weighted return for the top-ranked funds would therefore be 0.39% (i.e. 0.10*0.01-0.12*0.03+0.13*0.05)
The formula would first need to look in the ranking column to identify those funds with a particular rank (column D), then calculate their weights by dividing their market value by the total market value of all funds (column B), and finally multiplying these weights by the rate of return (column C), before summing the results to say, for example, that the total market-value weighted return for the top-ranked funds is 0.39%
I'm looking for a function that calculates a fee deduction based on the 28th of each month.
I'm paying back £200 on 28th of every month starting 28th Feb and was hoping that a formula could keep track of this...
A
B
C
D
1
£1,300.00
=TODAY ()
2
-£200.00
28/02/13
FUNCTION
How to do it but basically I'm trying to put a formula in D2 as follows:
If Today's date (C1) equals C2 I need B1 to reduce by the amount in B2
How to continue it calculating reductions per month by duplicating the formula...
I have a file to calculate bonus based on productivity. The bonus percentage is dependant on productivity percentage and the category of employee. I have given in the below attached file, the range of productivity% and the bonus % for each category. I want to build a formula, to get the bonus % in a seperate table. I tried to do the same using "If" condition, but its not working, as the number of nested IFs are going beyond 7. I have highlighed the column where I want to calculate the formula.
View 5 Replies View Relatednumber for item detail level from category standpoint. For example, in the category sheet has total number per category and per month and in the item detail sheet has a list of item number with category. I want a formula to recognize which item belongs to which category then use the total number of category by month to multiply with % of total in column D from Item Detail Spreadsheet.
View 2 Replies View RelatedI have a form in work which acts as a tick sheet for tasks complete on a construction site. When a task is complete I copy & paste from a key of dates i.e. week ending 11.05.15, this allows me to see what week a task was complete.
Generally I only marked off tasks which were 100% complete but my manager wants me to enter the % of the task complete also, i.e. 80% in the box.
So my question is how can I have the formula assume that any box with a date & shading is 100% and any cell with a number i.e. 80 is only 80% complete. I need it to monitor around 150 cells and give me the overall % complete based on what i have discussed.
When speaking with parents I want them to enter in their child's birthday i.e. 12/1/1998 in one cell and then automatically generate what grade they should be in the next cell. If the grade year cutoff date is Sept 1.
View 2 Replies View RelatedI've got a spreadsheet where the start date is amendable and this is what I wanted. E.g. start date is Jun-14 and I want the formula to to calculate annual salary divided by 12 in each month from June onwards until Mar-15 (Financial year is April to Mar) and the same way to not show anything in April or May as they started in June... How can i achieve this please as I tried IF statements and it doesn't recognise dates and years...
Link: [URL] ....
I need a formula that will calculate the total of the items in column "W" when the row directly below it contains a "1" in column "V". It will need to calculate the totals from that row all the way up to the next row that contains a "1" in column V.
Example:
In X14 (where I will put the formula) it would total W9 through W14. However the formula still needs to be able to calculate the total if there are more or less cells to sum. So that the same formula could calculate that in X8 it will total W5 through W8.