For instance:
The values of column C are dependent on the cell D1.
SUM(C1:C50) with the condition that D1 has the value 30
SUM(C1:C50) with the condition that D1 has the value 50
SUM(C1:C50) with the condition that D1 has the value 70
Is it possible to assume these values for D1, so that all of the cells in column C are calculated in accordance with it, before column C is summed up?
I have a spreadsheet that captures task start and end dates similar to project. It currently calculates Networkdays correctly, so if you have:
1. 1/1/06 - 1/31/06 (22 Days)
2. 1/1/06 - 12/1/05 (- 22 Days - showing dates have been entered incorrectly.)
3. 1/1/06 - No End Date (-27655)
=IF(ISERROR(NETWORKDAYS(E23,F23)),"NA",NETWORKDAYS(E23,F23))
My concern is with #3, is there a way to instruct the formula that if columna and columb are not filled in,the result should be blank. Previously I had it where it indicated NA - but the problem with this is - while it appears fine in Excel, when I pull it into Access to report on I get the -27655. This is throwing my reporting off.
I am trying to put together a spreadhseet that will calculate the future cost of education fee assuming a given inflation rate. I would like the reuslt to be highlihted in a list or a table. The user would only need input current fee, inflation rate and years where fees are payable. The spreadsheet would do the rest. I have laid this our best I can attached.
View 5 Replies View RelatedVersion: Excel 2007 WinXP
I'm basically looking for something almost like an inverse function to INDIRECT. This function would first look at a cell's formula as a text string, parse out the first valid cell reference in A1 format, and return that cell as a text string.
Detail: I have a spreadsheet with cells that point to other values. I would like to get only the row number from the first cell reference in the formula residing in a given cell. For example:
Suppose A1 has the formula =AL267. and A2 has the formula =SUM(AL94:AL235)
I would like a formula in B1 that returns the text string, "AL267" so that I would know this is the first reference.
Ideally it could be dragged down to B2 such that it returns the text string "AL94" (and not "AL235") because AL94 is the first cell reference in A2's
Currently I am copying the formulas after hitting ctl+` and pasting that text into a text editor, followed by text operations to manipulate the results into the desired values. Any solution that didn't involve going out to notepad.
Note: I know the syntax below is not how you would enter forumlas into Excel but I am using it to quickly illustrate what I'm trying to do and need help with. A cell not in column D, E, or F contains a formula of the form: F=IF(D>0, D/E, "blank") .
Note: If a cell in column D>0 (eg. D5>0) then the cell to the right of the selected D cell (eg. E5) will also be >0 ; otherwise, both cells will be empty.
This is what I want to do: If cell D?>0 , then F?=D?/E? ; otherwise, F?=empty .
Example 1: If D5>0, then F5=D5/E5 ; otherwise F5=empty .
Example 2: If D7>0, then F7=D7/E7 ; otherwise F7=empty .
Etc. I want this to apply to all rows.
I cannot enter the formula directly into the F? cell because sometimes I will need to enter data into cell F? manually. When I need to enter data manually into F? this results in the formula being overwritten by the new data and this means that if I ever needed to have data calulated based on the formula F=IF(D>0, D/E, "blank") I would have to re-enter the formula from scratch over again; obviously this is a nusance.
I have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc
Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
Here is the scenario:
A B C D
BananasApplesOrangesTotal113=A1+B1+C1
I need to reference the formula in D1 with the cells headers names.
In a perfect world, it would take
=A1+B1+C1:
and produce:
=Bananas+Apples+Oranges
I'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
I am using vlookup to get a cell value from another sheet, but if the cell has "&" or "/" I need to substitue "&" and "/" with "and" so that the cell can be added later to a url.
i am using =VLOOKUP(a1,Sheet2!A1:W17968,6) to get the value of a1 in sheet 2 and return the value of column 6
this will return "Audio Cables & Leads" but i need it to say Audio Cables and Leads
I need the formula to also check and replace "/" with "and" as well so cables/wire will be Cables and wire
I'm wondering if it's possible to write a formala that if a certain condition is met, performs a formula referenced in another cell. For example: Column A contains a list of formulas. In column B is the condition, let's use Work Type as an example. The result (or the formula I need) would be in column C. So if the work type is "Type1", then the formula in the corresponding column C cell would perform the formula in cell A5. If the work type is "Type8", then the formula in the corresponding column C cell would perform the formula in cell A2.
Is this possible to do without VBA?
i need a formula for which calculate all cell (calculating years months and days formula). FIND ATTACHED .xls file i need a answer in cell highlited in yellow color.
View 3 Replies View RelatedI have attached a sample of the spreadsheet. The cell/cells in question are f32:f36 on the first tab.
Question #1 how this formula works or what it does.
Question #2 Is when I enter the required information in cells a32:e32 it enters an N/A in cell f32. When I than click on cell F32 and than click on the formula bar and hit enter the information populates.
I have two questions:
1. Is there a way cells with formulas cannot be tampered even if they are not locked? So when I enter a data on a cell with formula, the formula won't be erased? The sample below shows that C1 and C2 has formulas but let's say I enter a value on C1, the formula should still stay? Is this possible?
A B C
1 5 10 =SUM(A1:B10)
2 2 4 =SUM(A2:B2)
2. Let's say I have a total of 125 (A1) and I need to get the answer (B1) where it has 5 with No. 3 on top (subscript) of 5? How to create a formula for this (I hope I make sense)?
In cell A1 exists data. In cell A2, I would like to test A1 to determine if A1 is a formula or a constant.
Examples:
=A9+3 would result "formula"
="1+3 would result "formula"
3 would result "constant"
'Blahblah would result "constant".
I know this is an easy one but I'm unsure why I can't easily modify a formula. The key event in this formula is "+190". Every time I change the value the formula no longer works. I've copied to another cell and the formula no longer works. My question is when you have a formula like this one if you have to modify how do you do it and keep the formula working.
View 9 Replies View Relatedi'm having trouble formating a cell to accept either user input or a equation i've made. i would like it to accept the user input and when there is no input to use the equation i have.
View 8 Replies View Relateddoes such a formula exist? I regularly Change a formula in cell C1. To Show my working I would like to have The formula from C1 written next to it as an equation.
Example: B1 | C1
=Text"updated from formula in C1 automatically" | =x+y*A2
Summarised, is there a formula to Display the formula written in another cell?
I want to use the values in a range of cells in a sheet for a formula in another sheet. The problem is that these range of cells already has formulas and when I select these cells for use in another formula, the values doesn't get picked up and my formula doesn't work. for example -
cell L4 in sheet 1 has a formula - ='H:VK_2011_onwards1_ACC_BJS_SAA 6
and it has a value - 34.76
cell L5 in sheet 1 has a formula - ='H:VK_2011_onwards1_ACC_BJS_SAA 6
and it has a value - 47.09
Now I want to use this two cell to calculate an average in sheet 2. So if I use the formula =AVERAGE(Sheet1!L4:L5). I get no result.
I am using the Networkdays function to calculate the number of working days between a date entered in A1 and a date in B2 and I have a range of holidays called 'holidays' and then have the result placed in E1.
View 9 Replies View RelatedI paste new data into a sheet of a monthly report I prepare. For this sheet, the # of data rows change (and is unpredictable) every month. I need the value inside a specific cell that dynamcially moves up and down based on the # of rows for that month (because it's below the rows of data).
So I made a formula to identify the exact cell # every month.
Example:
This month the exact cell is F255 in the "Refi" sheet.
So my formula in the "Summary" sheet cell A1 first finds the cell row # only (255) and since it's always column F, in B1 I have
VB:
="F" & (A1)
This outputs "F255" in B1, successfully identifying the target cell.
Now how do I write a formula in C1 to grab the value from whatever cell is named in B1. (For this month, the value in cell F255 from the "Refi" sheet)
I'm trying to do a formula that references a cell and returns a different result dependant on the number in the cell being referenced.
For example I've said if A1 has a 3 in it then put the word TEST as the result, plus if it has a 4 put the word RESULT.
What I wrote as my formula is as follows-
=IF(A1=3,"TEST")+IF(A1=4,"RESULT")
It works fine when I only use one result but goes wrong when I add two. If I change the words I want to show to numbers it comes up fine but with words it just returns a Value error.
How to determine the correct formula for this requirement?
Assuming I have 2 individual excel files and an index excel file (in reality, there are more than hundreds of file). For index excel, once the user enter part number (eg. 1 or 2), the excel will look for the part number excel file and determine vlookup function.
The only problem I have here is I can not make the index file automatically add the part number shown on most left column into the required formula (replace the part number file section).
I tried use the indirect function but this require each file to be opened, which is not possible for actual use. I am looking for a function that can work in closed worksheet.
Attached files :
index.xlsx
1.xlsx
2.xlsx
Ok, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.
I tried this but it's not working:
=IF(C3="0","",C3-C2)
Is there a way to make a cell populate certain text based on conditions of other cells without putting the formula in the cell you want to populate. So that someone could type other text into the cell if the conditions were not met?
View 14 Replies View RelatedI am currently using this Formula to Search a table on sheet 2 (Tabelle2) and copy the date in the relevent cell (Cells) into the correct cell on Sheet 1 (Master Sheet).
[Code] ..........
Used in cells E10:AZ30 and E33:AZ46
This works perfectly and is the formula behind all relevent cells in Sheet 1.
I would like to keep this but to add that it also copies the background color of the cell in Sheet 2 to the cell in sheet 1.
If i can Bring this Formula into VBA and add the color changing part, It must only work on the cells listed above..
my destination cells will have formulas like:
='E:My WorkTestData[CCC.xlsx]Input'!$S$31
Everything works fine. But I don't want the destination cells to display the full formula, but the actual Value only
I thought of a way to build a script that first builds the formula to one cell then Copy Paste Special value of that Cell to my desired Cell.
But when the code runs The cursor moves back and forth all the time...
Is it possible to use a formula to shade a cell dependent on a condition? I have tried an if formula (see below) but it is incorrect. =if('November 2006 SVOC'!B6>'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [red],if('November 2006 SVOC'!B6<'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [blue],))
View 3 Replies View RelatedI need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
My workbook has sevaral sheets reresenting the payment methods used by our customers. Each sheet has a range of cells F9 to Q33 which should hold the value of payments for each working day. e.g. F9 represents April 1st, F10 represents April 2nd.
A daily list of values is supplied which then transfers that day's value into cell E1 on each sheet.
On each sheet I manually have to take the value in E1 and copy and paste special: value into that day's cell e.g. today I will paste into cell K21. The cell value then looks like this '12134.12'. I then edit the cell to put a calculation on the end to divide the value by the value in another cell on the sheet. The cell value ends up like this '=12134.12/$G$5'. This is so I can see the values in thousands of pounds or by changing the value of G5 to 1,000,000 in millions.
Tomorrow I will do the same but in cell K22.
I have to do this on 15 worksheets and I have been struggling to get a macro together to do this. I can get as far as copying and pasting but I don't know how to add the calculation onto the end. I also would like to be able to input the cell destination daily probably with an input box so I can be flexible and potentially run it sevaral times if I need to catch up on previous days.