I am using the Networkdays function to calculate the number of working days between a date entered in A1 and a date in B2 and I have a range of holidays called 'holidays' and then have the result placed in E1.
View 9 RepliesI tried putting a formula into the below code but without any success.
mylogoff. Offset(0, 3).FormulaR1C1 = "=IF(WEEKDAY(RC[-1]=""6"",""17:30:00""+0,""18:00:00""+0)
It says application defined or object defined error.
I try to put a formula to a certain cell using this code, but I get application defined or object defined error:
HTML Selection.Cells(1).Offset(0, 5).Formula = "=INDEX(range1;MATCH(""D""&C13;range2;0);MATCH(""S""&D13;range3;0))"
The weird thing is, that if I type the same formula itself to a cell, it works, so the problem shouldn't be with the formula:
HTML =INDEX(range1;MATCH("D"&C13;range2;0);MATCH("S"&D13;range3;0))
On the other hand I tried to replace the formula in my VBA code with simpler one, like this one and that worked aswell:
HTML Selection.Cells(1).Offset(0, 5).Formula = "=a1+a2"
I'm using the below to code to insert a formula in cell E1, what am i doing wrong here.
View 5 Replies View RelatedHere is my
Dim value1 As String
value1 = "=OFFSET($B$6,$A6-1,0,1,1)"
Range("g6:ad12").Formula = "=SUMIF(OFFSET(" & value1 & "!$j$6,0,0," & value1 & "!$A$5,1),(" & value1 & "!AS$5)-1,OFFSET(" & value1 & "!$n$5,1,0," & value1 & "!$A$5,1))"
my "value1" needs to equal the value in the corresponding row for the formula. For example:
B6 = "BEA"
B7 = "GE"
B8 = "TAS"
My formula only gets cell B6 value and doesn't pick up B7 or B8 as the formula copies from G6:AD12
how do i get it to pick up B7 then b8?
Upon user making selection from data validation list in Active Row Selection & Column A : i would like to do the following (is possible)
,,,,,,,,,,,,,,,
Place formula in Active Cell Row & Column S
=MT4|BID! (followed by cell A1 but replace the "/" with "") followed by "m"
I have tried several combinations but with no success.
Also - where would i place this code so that it automatically updates the formula in Column S as soon as the user changes selection in Cell A?
Cell b2 contains the formula
=IF( COUNTIF(B$1:B2,B2)=1,MAX(A$1:A1)+1,"")
I want cell b3 to contain the formula
=IF(COUNTIF(B$1:B3,B3)=1,MAX(A$1:A2)+1,"")
I can do this within the spreadsheet by simply highlight and drag down to autofill and excel updates the formula references as I need
However - because the sheet gets very large (its a sort of rough database)
I dont fill in all the formulae on a blank sheet, but each time a record is entered using a VBA form I have the following working code copy the formula
ActiveCell.Offset(nextline, 0).Copy
ActiveCell.Offset(nextline + 1, 0).Select
ActiveSheet.Paste
However I dont want to use 'Active' - because I have to work out what cell is selected before this is executed and then reselect it after, which also causes the screen to flash when the active sheet changes so I tried the following which does not work
Worksheets(" Analysis").Range("A2").Offset(nextline, 0).Copy
Worksheets("Analysis").Range("A2").Offset(nextline + 1, 0).Paste
because 'object does not support this property or method' on the Paste.
I can save the code in a string and modify the string to generate the new code, but I cant find a way to assign the new formula to the next cell.
If I wish to amend the below code such that it must use the cell one row above minus the cell on the left, how should I go about it?
Eg,
If in cell C10, the formula is to use C9 minus B10.
If in cell C11, the formula is to use C10 minus B11.
mylogoff.Offset(0, 1).FormulaR1C1 = "=RC[-1]-RC[-2]
I am about to take on a rather large excel project for our company. The first part is coming up with how to deal with our drafting department's length inputs. In this project, our users will be entering lengths in a unique format. I have to convert that unique format to a standard Foot-Inch-Fraction format.
To try to keep the file size down and keep the complexity down, converting a cell formula to VBA so i can run this on a group of cells rather than repeating my code downward multiple rows on multiple sheets.
It is either this or come up with my own font that will convert it for me but I do not know where to start with that. How to take a stab at converting this to a VB code i can run?
A3 = 1.0108
B3 = 1'-1 1/2"
The code in B3 looks like this:
[Code] .......
An explanation of the unique format we use in our drafting department:
Basic Feet, Inch and Fraction format = 0 . 00 00 = Feet . Inch Fraction
The numbers left of the decimal point are feet. The first two numbers to the right of the decimal point are inches and the next two are sixteenths of an inch.
Examples:
4’-2" = 4.0200
15’-5 1/4" = 15.0504
4’-11 3/8" = 4.1106
0’-1 15/16" = 0.0115
If I have a cell containing a formula say c1= sum(a1..a10) and the output appears in a50. how do I colour code it so I know the formula in c1 is linked to the output in a50?
View 5 Replies View RelatedApplication. ScreenUpdating = False
For FormulaRemake = 2 To 2000
Worksheets("Data"). Range("D" & FormulaRemake).Formula = ""=If(ISERROR(Data!W"" & FormulaRemake - 1 & "")"" & ""=True,"",Data!W"" & FormulaRemake - 1 & "")""
Next
Application.ScreenUpdating = True
I'm having troubles with the syntax for the .Formula part. I read that when you do this you're supposed to double quote everything, except if you need a "" in it...?
Should look like this when done right: =IF(ISERROR(Data!W1)=TRUE,"",Data!W1) Also is there anything besides ScreenUpdating that will make this code run faster?
Here is the code I'm working on:
I want this code to replace the value of s with the value of a cell.
sub Macro2()
Dim s As String
s= value of (cell F2)
Range("I8").Select
ActiveCell.FormulaR1C1 = "='[(s).xlsm]Payroll Computation '!R8C11"
End Sub
the following two statements return the error "Application-defined or object-defined error"
Code:
Sheets("Purchase").Range("PurchaseTax").FormulaR1C1 = "=IF(RC[-1]0,ROUND(RC[-1]/11,2),"")"
Sheets("Purchase").Range("FreightTax").Formula = "=IF(FreightCharge0,ROUND(FreightCharge/11,2),"")"
I'm having trouble getting my random number generator functions to use my variables that are defined by text box inputs. I can mouse over the variables in the code and they have the correct values, with the excpetion of where they are listed in the functions. I'm sure I'm missing something simple, thanks in advance for any help!
Private Sub cmdPopulate_Click()
StdDev = txtStdDev.Value
RandomNum = txtRandomNum.Value
Mean = txtMean.Value
lambda = txtLambda.Value
OriginCell = txtOriginCell.Value
If cmbDistributions.Value = "Normal" Then .................
When I enter data in the cells A1 and B1, C1 needs to calculate the result. (not copy and paste)
For examle: I have formula C1=(A1+B1)/2
C column for formula, but shows result only when there is a data in A and B
The idea is to select an item i one cell, which in return will affect the following cells with the nutritional values. So far so good. I would then like, if a given amount is entered, it calculates the values.
A food item is typed in Cell A. The following cells will Index Match a table (on a different sheet), importing calculation formulas based on the food items nutritional value (Cells C - G). If an amount is typed in Cell B (i.e. 100 grams) the following cells will then calculate the correct nutritional values.
i learned to make an INDEX MATCH function, so that when i type "Gulerod" or something like that, the following cells import information from the Table tab... When the table contains fixed values, this works just fine. However - i tried to make the table (the cells) with calculation formulas (i.e. =SUM(4*B3))... this means the values in the tables are 0 untill a value is typed in B3 (in this example).
... however when i do the Index Match in my main tab, only the "0"'s are imported, and no matter what value i enter in B3 in the main tab, the following cells remains with the fixed value 0.
... so my question is - is it even possible to have the Index Match function import the calculation formula from the table and have it work in the main tab as well? Or is there any other way to make this work in Excel? Basically - to have the main sheet find the relevant data to use for calculation on a different tab/sheet, and then do the actually calculations on the main tab/sheet.
I am using this code and it works fine:
Dim MyData As Range
Dim MyResult As Range
Set MyData = Range("E1:E1000000")
Set MyData2 = Range("F1:F1000000")
Set MyResult = Range("J4")
MyResult.Select
Selection.Formula = "=COUNTIFS(" & MyData.Address & ",""=Kim""," & MyData2.Address & ",""=done"" )"
Is there any way I can change the code so that it automatically finds the last cell as Im using Range("E1:E1000000") and Range("F1:F1000000") because there will not be more than 1000000 entries.
The loop is putting the correct formula into the cell - but THEN... - I wish to (within the loop and before it moves on) check if the value is equal to OR greater than 1 - if it is, make it a value of 1 (this '1' is then used at the bottom of the column of data to give a total). I need to do this before it moves onto the next cell. What am I doing wrong? Is it because once it puts formula in the cell, it then moves down - do I need to select the cell again first? As I had originally posted on this site - link: url]http://www.excelforum.com/showthread.php?t=641970[/url]
View 2 Replies View RelatedI'm trying to set a cell on one sheet to be equal to the product of two cells on another sheet. The problem is that one of the cells on the other page is dependent on the variable T. This is what I've got and it's giving me errors
Worksheets("Output").Range("K14").Formula = "Worksheets("Calcs").Range("D17")*worksheets("Calcs").Range("D17").Offset(10+T,0)"
When I record a macro it gives me this, but again, I need the last cell in terms of "T"
ActiveCell.FormulaR1C1 = "=Calcs!R[3]C[-7]*Calcs!R[14]C[-7]"
Hello I'm looking for some clarification about how to use "= SUM(RC:RC)". I don't understand what the RC:RC represents. I thought that this was the directions for where to "position" the formula, but I think I'm missing something.
I was able to include the correct cells that I need summarized, but the answer is not right; it's zero.
Public Sub SubColumn(CritStr As String) ...
I would like to use a varible Cell for the following forumula:
ActiveCell.Formula = "= ROUND(PIExpDat(""TimeEq('""&Cells(RowNdxG,4)&F$2,F$3,F$4,F$5,0,)/3600,1)"
I have underlined the variable. This is not working but is rather showing up as a string value Cells(RowNdxG, 4).
I am having to copy and paste rows of data into a new worksheet where the rows sizes change and I am wanting to add a new row at the end of the pasted rows but with the sumation formula to add the relevant column
e.g copy range B14:AA17 with in this case columns E to AA holding the numerical values. Therefore I wish in cell E18 to sum the value of E14:E17 and so on ending with cell AA18 holding the sum of AA14:AA17
As these vary I have all relevant variables, Range to add sumation values to eg E18:AA18
Start Cell E14 and so on.
I tried adding "=SUM(x:d)" where x and d are vars relating the the column cell required eg x = E14 and d = E17
Version: Excel 2007 WinXP
I'm basically looking for something almost like an inverse function to INDIRECT. This function would first look at a cell's formula as a text string, parse out the first valid cell reference in A1 format, and return that cell as a text string.
Detail: I have a spreadsheet with cells that point to other values. I would like to get only the row number from the first cell reference in the formula residing in a given cell. For example:
Suppose A1 has the formula =AL267. and A2 has the formula =SUM(AL94:AL235)
I would like a formula in B1 that returns the text string, "AL267" so that I would know this is the first reference.
Ideally it could be dragged down to B2 such that it returns the text string "AL94" (and not "AL235") because AL94 is the first cell reference in A2's
Currently I am copying the formulas after hitting ctl+` and pasting that text into a text editor, followed by text operations to manipulate the results into the desired values. Any solution that didn't involve going out to notepad.
I have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc
Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
Here is the scenario:
A B C D
BananasApplesOrangesTotal113=A1+B1+C1
I need to reference the formula in D1 with the cells headers names.
In a perfect world, it would take
=A1+B1+C1:
and produce:
=Bananas+Apples+Oranges
I'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
I am using vlookup to get a cell value from another sheet, but if the cell has "&" or "/" I need to substitue "&" and "/" with "and" so that the cell can be added later to a url.
i am using =VLOOKUP(a1,Sheet2!A1:W17968,6) to get the value of a1 in sheet 2 and return the value of column 6
this will return "Audio Cables & Leads" but i need it to say Audio Cables and Leads
I need the formula to also check and replace "/" with "and" as well so cables/wire will be Cables and wire
I'm wondering if it's possible to write a formala that if a certain condition is met, performs a formula referenced in another cell. For example: Column A contains a list of formulas. In column B is the condition, let's use Work Type as an example. The result (or the formula I need) would be in column C. So if the work type is "Type1", then the formula in the corresponding column C cell would perform the formula in cell A5. If the work type is "Type8", then the formula in the corresponding column C cell would perform the formula in cell A2.
Is this possible to do without VBA?
i need a formula for which calculate all cell (calculating years months and days formula). FIND ATTACHED .xls file i need a answer in cell highlited in yellow color.
View 3 Replies View Related