I would like to add something (formula) to the following code to automatically add a new ID number with each new entry. Some of the entries will have the same name but each time a new entry is added I want the ID number to increase by 1. Assume that the first entry is 0001.
View 5 RepliesCell b2 contains the formula
=IF( COUNTIF(B$1:B2,B2)=1,MAX(A$1:A1)+1,"")
I want cell b3 to contain the formula
=IF(COUNTIF(B$1:B3,B3)=1,MAX(A$1:A2)+1,"")
I can do this within the spreadsheet by simply highlight and drag down to autofill and excel updates the formula references as I need
However - because the sheet gets very large (its a sort of rough database)
I dont fill in all the formulae on a blank sheet, but each time a record is entered using a VBA form I have the following working code copy the formula
ActiveCell.Offset(nextline, 0).Copy
ActiveCell.Offset(nextline + 1, 0).Select
ActiveSheet.Paste
However I dont want to use 'Active' - because I have to work out what cell is selected before this is executed and then reselect it after, which also causes the screen to flash when the active sheet changes so I tried the following which does not work
Worksheets(" Analysis").Range("A2").Offset(nextline, 0).Copy
Worksheets("Analysis").Range("A2").Offset(nextline + 1, 0).Paste
because 'object does not support this property or method' on the Paste.
I can save the code in a string and modify the string to generate the new code, but I cant find a way to assign the new formula to the next cell.
I am using this code and it works fine:
Dim MyData As Range
Dim MyResult As Range
Set MyData = Range("E1:E1000000")
Set MyData2 = Range("F1:F1000000")
Set MyResult = Range("J4")
MyResult.Select
Selection.Formula = "=COUNTIFS(" & MyData.Address & ",""=Kim""," & MyData2.Address & ",""=done"" )"
Is there any way I can change the code so that it automatically finds the last cell as Im using Range("E1:E1000000") and Range("F1:F1000000") because there will not be more than 1000000 entries.
appending excel sheet number in a formula. Here is the example.
In an excel book, I have sheets 1 to 50. In each sheet i have a standard format to enter the details. And in one sheet I want to keep some summary with required cells. I made a table by applying formula, for example in cell A1 i kept formula ='9'!$D$9. In this '9' refers sheet9. In the similar way i want to capture the data from all sheets.
A1 cell ='9'!$D$9
A2 cell ='10'!$D$9
A3 cell ='11'!$D$9....etc
Is there any formula to append the Sheet number automatically (like dragging the shell) intead changing sheet number manually. because it is wasting so much time.
I'm having trouble getting my random number generator functions to use my variables that are defined by text box inputs. I can mouse over the variables in the code and they have the correct values, with the excpetion of where they are listed in the functions. I'm sure I'm missing something simple, thanks in advance for any help!
Private Sub cmdPopulate_Click()
StdDev = txtStdDev.Value
RandomNum = txtRandomNum.Value
Mean = txtMean.Value
lambda = txtLambda.Value
OriginCell = txtOriginCell.Value
If cmbDistributions.Value = "Normal" Then .................
I have a basic formula =C17+'Asset Depreciation 2008 Onwards'!C24, and I want to copy it down just using the drag function. Problem is that the second reference range of cells are in rows and hence when I copy it down it doesn’t automatically update the cell references because it want to update them by column number instead of row number. IE I want it to display =C17+'Asset Depreciation 2008 Onwards'!
D24, instead of C25. Do you know if there is any way of telling Excel that I want it to increase the column number by 1 every time, instead of the row number for this part of the formula?
I have some code, and I want it to run without assigning it to a button... Can it run anytime something is changed on the page? here it is:
View 2 Replies View RelatedIs there a way that I can add a statement or change my code to automatically have the checkbox checked if a certain value in a cell is greater than zero?
This is my
If CheckBox1.Value = True Then Range("RANGE_WATER_AND_SEWER").PrintOut Copies:=1
If CheckBox2.Value = True Then Range("RANGE_ELECTRICAL_SERVICE").PrintOut Copies:=1
etc. Note: I have about 80 checkboxes on my form.
I have written some code intended to automatically clear a cell when data appears in it from an external source. In one spreadsheet, it seems to work exactly as expected, ie when the cell is polulated, it immediately clears the contents. In another spreadsheet, with exactly the same code, it will not automatically clear. If I put it in debug mode and step through it line by line, then it does do as expected but otherwise it won't.
View 9 Replies View RelatedI was trying to add some code through VBA to a new Workbook I'm creating. I'm following the instructions in {url}
What I need is to add an worksheet_change event procedure, and im trying it as it follows: ...
I have letter and number combination code in two collumns and they differ for 10.000 numbers:
BAM98314
BAM88314
BAM90000
BAM80000
As you can see the left code is for 10000 numbers higher. the letters are allways the same. In the event that this isn't so, if difference between codes in same row is more or less than 10000 numbers. I was thinking on making conditional formating so the cells with wrong difference would be marked red, but I do not know how to make formula for this difference.
is it possible to have boxes for numbers to be inserted into
i want the user to be able to fill in bank account and sort codes numers into the relevant individual box for each number
Is there a way to automatically conditionally format each column in each row, when either open, closed or cancelled is selecting from a drop down in the Status column. For example every cell is blank in colour, but if I select open in the drop down menu for row A2, the entire row will turn Red. Just wondered if there is a way instead of individually formatting every row separately. I would like to be able to copy the formula or whatever down the entire sheet.
View 2 Replies View RelatedHow to run a code at a specific time on a daily basis automatically?
for instance:
it's 10PM then call a specific sub
I have a workbook with dozens of filled cells.
The cells contian the file names: "filen_name.extension" (for example word.doc)
Also I have these files located in some directory.
Is there any possibility to add simoltaneously links to the cells which contain the appropriate file name.
I have an excel add-in that has got few macros which require two references,
1) Microsoft Word 12.0 object library
2) Microsoft Internet Controls
I have checked both these references and the macros are running perfectly on my PC. but when I distribute this add-in, sometimes the references are checked but sometimes it gives an error and the user is required to check the reference again.
Can i use some code to automatically check these two references. or is there some other easier way to get rid of this error.
How do I automatically run VBA code when a workbook is opened?
View 7 Replies View RelatedI have a code which should automatically lock the cells when ever i change a certain value of cells. the code is given below. But the change doesn't happen. I've first protected the sheet then using code unlock and then again protect the sheet after locking the cells. I'm getting no errors but the cell doesn't get locked.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 14 Then
ActiveSheet.Unprotect Password:="password"
[Code]....
I'm trying to write a VBA code to automatically update using a vlookup but I seem to be running into trouble, partically with the lookup value part of my vlookup. I basically have a range of dates in column B and want the values to appear in column C. Yes, I know I just type the forumla in column C and drag it down, but I really need to do it in VBA, as I want this to update when additional dates are added.
This is what I have thus far. The code keeps looping at i = i +1 and doesn't stop unless interuppted.
Sub update()
Dim i As Integer, L() As Range, s As Integer, V As Double
Sheets(1).Activate
s = Range("D:D").Select
On Error Resume Next
While s ""
i = i + 1
ReDim Preserve L(i To 1)
L(i) = s
Wend
If i = 0 Then
MsgBox "No dates found"
End If
Exit Sub
For i = 1 To UBound(L)
V = WorksheetFunction.VLookup(s, Range("Inputs"), 2, 0)
Next i
End Sub
Does anyone know code to bring up a comments box automatically when a certain word is entered into a cell? I have an If statement but I just don’t know how to open a comments box in the same cell.
View 4 Replies View Relatedto write a code that would create a chart automatically in another worksheet when a button is clicked.
I have attached the sample data that I am working on.
Each row in the sheet represent 3 coordinates, which are:
coordinate # 1 = start, 0
coordinate # 2 = centre, level
coordinate # 3 = end, 0
i have a caclulate event that I want to run constantly while the workbook is open. How can I do this? below is the code for the calculate event:
Private Sub worksheet_calculate()
If Sheets("Messing Around"). Range("e14") <> changeval Then
Range("e15:e100").ClearContents
If ActiveSheet.Range("E14").Value = "T1/E1" Then
Sheets("Tables").Range("J2:J79").Copy
Sheets("Messing Around").Range("e15").Activate
ActiveCell.PasteSpecial Paste:=xlPasteValues
ElseIf ActiveSheet.Range("E14").Value = "DS3/E3" Then
Sheets("Tables").Range("k2:k79").Copy................
I need to send a mail on a daily basis from outlook at 6.00 pm.
Containing a shared link to particular mail I'd.
I have a simple script that puts the save time in the last row of column C when the spreadsheet is saved. Another script puts a username in Column A and column B contains the time opened. I would like to add to the save script to make column D od the active row have a calculation similar to:
View 2 Replies View RelatedI've selected a case statement (see below) but I want to that code to work automatically. So i do not want to press a button to show a certain value in S2. But I want cell c2 to automatically pop up the value (depending of the value in V4). So kind like an if/then statement.
Sub CASEMEDEWERKER()
Select Case Range("F4").Value
Case "Medewerker"
Range("S2") = "M"
Case "Interview"
Range("S2") = "I"
Case "Data"
Range("S2") = "D"
Case "Observatie"
Range("S2") = "O"
End Select
End Sub
Need the code which would allow me to create a macro where when data is added into an excel sheet, it automatically adds in the date and the time?
View 2 Replies View RelatedI'm trying to create a condition that hides rows when certain cells are equal to zero (column D + E + F). Anything else, I would like those rows to remain visible. Ideally, I'd like for this to be applied with the use of a macro (button) and then also deactivated when not desired (possibly another button). I've seen some varieties of code for this but none have worked flawlessly yet. An example sheet I would like for this to work on is my "ADM" sheet", among others.
View 2 Replies View RelatedI have 2 pivot tables in a worksheet.
The names are "PivotTable1" and "Pivot Table2"
Cell H2 is the worksheet has a currency type, ex) EUR, CAD, GBP
Column 1 in each pivot table is "Currency Pair Sell/Buy"
Based on Cell H2, I want the pivot table filters in column 1 to show 'USD.currency' and 'currency.USD'
For example, if H2 = EUR, the pivot tables filters in column 1 should only show USD.EUR and EUR.USD.
Any template for this type of code, I can fill in the blanks with the relevant sheet names and other information that might be needed.
I need to be able to hide and unhide a given set of rows based on the value in a particular cell. My current code allows me to successfully do this, ONLY, when I select the cell being 'watched' for changes and press enter. It does not execute the code automatically.
The cell is changed by a set of filters that modifies the data. The watched cell is then a summation of the filter modified cells. If the filters change to all "0" or "-" then my 'watched' cell sum becomes "0" and thus should execute the code automatically.
Current Code:
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
ActiveSheet.Outline.ShowLevels RowLevels:=3
If Range("I62").Value = "0" Then
Rows("63:87").Hidden = True
End If
End Sub
So, right now if I use the filter and the cells change then the sum in I62 becomes "0", I have to manually select cell I62 and press enter and which point the above code executes exactly as I intend.
I need the execution part to be automatic and not have to manual click into cell I62.
I'm building a Excel 2003 workbook that needs more than 3 conditional formats. I've tried the code given in the FAQ: Get Around Excels 3 Criteria Limit in Conditional Formatting but this only works on cells being modified directly. I've also tried the code in the post: VBA Conditional Formatting - Refresh when data changes but neither does the job I need.
I'm using a Format Control to present the user with a list of choices. When the control changes the target cell I want to apply a conditional format to that cell. This image shows the form. When the Format Control selection (in B2) is changed I want to apply conditional formating to the target cell (A2).
There will be up to 10 choices and therefore conditions.