I'm trying to update a pivot table filter with a list on another worksheet. When I do a record and select two WBS for filter criteria I get the following:
If I entered values 700UY0S1MGL1 & 700UY0S1MGL2 in cells A1 and A2 of Sheet2 in the same workbook, how can I get this code to read that? If I extend the list to include additional items, how can I get the code to read it?
My next question is, in Excel I could enter a partial search (like 700UY0S1MG) in the filter drop down and I could filter on everything with this string. Using the macro it seems as though the full 12 char string needs to be qualified. How would I write a macro to handle this?
c)Also there are many formulas in the workbook that needs to be updated as well.
if i do it manualy i takes more time.......for opening and refreshing and i could see status bar running for excel calculation for updating all forumulas.
filter a pivot table that contains these 3 column fields: User 1, User 2, and User 3.
However, when I want to see the results for "John" in all those fields, I need to use one filter at a time. Is there any other way to see all results of the Pivot Table where "John" is a User, no matter if he is the 1, 2 or 3 user?
I have A3 and A4 as report filters in the pivot table. Is there any way can combine A3 and A4 into one cell. The new cell is something like drop-down list contains contents from A3 and A4. When picking up the from this drop-down, the corresponding data list will be shown (like the data in B3 and B4).
I am trying to arrange data (pay by week) for regions and sites within a region. In the first Report filter, I select the site, and the second report filter gives me all of the sites - not just those in that region.... How I can either arrange my data or change my pivot, so only the appropriate sites show under the region?
I can't know what fields will be filtered on so, so I need to extract all filters at run time.
I tried activeCell.PivotCell.PivotTable.ActiveFilters and this returns 0 although there are definitely filters available.
The workaround which I'm not is very good I'm considering is:
activecell.PivotTable.PageFields.Items collection which also behaves weird:
activecell.PivotTable.PageFields.Count returns 2 at the same time it has 3 elements: activecell.PivotTable.Item(0);activecell.PivotTable.Item(1);activecell.PivotTable.Item(2)
I have a pair of Pivot Tables with matching Pie Charts that look at Project Costs and Schedules. When I filter one, I'd like the other to filter automatically.
I found these links and used the code that Jerry supplied but I am running into trouble.
pivot table question
Pivot Table- "Master" Report Filter My filters (PivotField names) include Contractor RCEs District Year Month
When I select a contractor from PivotTable1 it does not change PivotTable2.
There is additional code in this workbook that Jerry recently wrote concerning drilldown formatting. It was initially created for a different report but now I use it in many of my other reports. I don't think it's causing the problem, I placed the new code above it (including in the module) and there is a line breaking it up from the new code.
As a side note, I may or may not need to change every filter. In this case I only want to change the contractor, but other times I may want to change other items.
Is there a way to loop through pivot table filters in VBA? In my case, I need to loop through the filter "Month" which contains January - December. For each of the month, I have to select and double click the total cases in each month.
So for every loop, for example,
Pivot 1 January Count
Case 1 2
Case 2 1
Total 3
I need to open the drill down in B3 (this drill down will be opened in a new sheet, Sheet 1), copy the data and paste it in another sheet named "January Cases". Then the code will delete "Sheet 1" and proceed with the same with February till December. Is it possible to loop through pivot table filters?
PIVOT TABLES -- Old data remains in pivot table filters
One more Pivot Table Question:
I have workbooks i have built and re-use with fresh data after verifying that the previous data has been cleared. Unfortunately there are times in the drop down filter, old data will remain, but is not at all in the data set. How to clear this out? I have ensured that before pasting in new data the old data has been cleared below the headers. I keep my headers so I don't need to re-do the Pivot Tables or adjust the Name / SUM capabilities in the VALUE FIELD SETTINGS.
I have created a pivot table and I'm using report filters for both Client and Asset (obviously there are a lot more data points). When I filter on Client 1 I would expect to only see Port 1 - Port 7 available in the Asset filter however, I see every asset in the data set. I need to pick and choose using the Select Multiple Items check box without having to scroll through every single asset. Is there a way to easily do this?
I had 2 pivot tables running on the same page (sheet 2). They both draw data from the same source (Sheet 1).
The only difference between the two is that pivottable1 has a filter for "home team", and pivottable2 has a filter for "awayteam".
I have managed to link the tables using VB so if i select "Man United" on pivottable1 - as the home team, pivottable2 also selects "Man United".
Now my problem is, that i don;t want to select the teams from the drop down check box list on the actual pivot table. I want to be able to do this by typing into a cell (say Cell A1 on sheet 3 for instance) and this controlling BOTH pivot tables.
I did have some lengthy code which worked for one pivot table, but it did not operate both and it over rode my code i had in place which works for manual filtering.
I'm trying to make a pivot table that can compare sales based on the whatever month/year/salesman combination I give.
Ideally, I'll be comparing the sales data for 3 seperate months. Can I make a pivot table where I can make different filters apply to specific columns?
I have a pivot table with over 4000 entries and about 12 columns which i filter to get the info i want.
Unfortunately with so many rows and columns in the table, if i do a macro that gets each filter back to 'show all' its really slow.
Doing this manually using the "Show all" option in the filter takes a fraction of a second, so surely there must be a way to do this more quickly in VBA?
i can't understand why manually it takes no time at all, but automating it through recording a macro takes forever.
I have 3 pivot tables and with 3 filters each (they are all the same filters). I just want to change 1 of the filters for each of the pivot table (meaning the other 2 stay the same for all of the pivots). Is it possible to have a filter change automatically to match a filter in another pivot?
I'm Using Excel 2007 and would like to have some VBA to work with the following!
I have a simple pivot table (PivotTable1) in Sheet1 with three items in the Report Filter which has been named "ROUTE" I have created a ComboBox in Sheet2 and have added the identical three items in via format control, cell link A1.
I would like to be able to use the combobox in sheet2 to operate the PivotTable Report Filter in Sheet1 as I would like to build a report whereas a user. Can only select the comboBox and does not see the pivotTable
Sounds simple but cannot get this to work no matter what I try.
trying to get pivot tables to automatically update every 4 minutes.
I have 3 worksheets:
worksheet 1: SCANNER, this sheet pulls in data externally using an =RTD links
worksheet 2: RAW, this manipulates the data above, and this is the data used to create the pivot tables
worksheet 3: SUMMARY, the pivot tables are here, there are 9 of them.
Worksheet RAW, changes every so often, and every 4 minutes I would like to have the pivot tables AUTO REFRESHto make sure its using the latest data from RAW.
I see options to autorefresh on the opening of the workbook, but cant see anything to REFRESH EVERY X MINUTES.
When I tried to Refresh the Pivot Table, the message I got was: The PivotTable field name is not valid. To create a PivotTable report, you must use data that is organized as a list with labeled columns. if you are changing the name of a PivotTable field, you must type a new name for the field. I did go in a check that all the columns are named though.
I've created a pivot table that summarizes sales and gross profit on a quarterly basis and YTD basis by Market and store. I have a drop down in my source data file which changes the month. I go to update the pivot table and it no longer recognizes the data fields because the headings change to the subsequent month. Is there a way to not have to recreate the pivot table every time a run a new period? See below. Once I run August and then refresh the data it will not recognize these fields any longer.
Is there a way to have separate Report Filters for each column in a pivot table?
I am trying to create a pivot table with 3 columns - 1: account code 2.current year (2011) 3. prior year (2010)
My Row Label is an account code field - each row is a different account code that sums up dollar amounts for the two financial years. The problem is that I need Columns 2 and 3 to have separate Report Filter criteria. So in Column 2 - I need the filter to weed out anything that is not 'Financial Year 2011'. In Column 3, I need the filter to weed out anything that is not 'Financial Year 2010'. Setting up a filter for one screws up the second, and vice versa.
Alternatively, how can I make two side-side-pivot tables that each have their own Report Filters?
I'm trying to write a VBA code to automatically update using a vlookup but I seem to be running into trouble, partically with the lookup value part of my vlookup. I basically have a range of dates in column B and want the values to appear in column C. Yes, I know I just type the forumla in column C and drag it down, but I really need to do it in VBA, as I want this to update when additional dates are added.
This is what I have thus far. The code keeps looping at i = i +1 and doesn't stop unless interuppted.
Sub update() Dim i As Integer, L() As Range, s As Integer, V As Double Sheets(1).Activate s = Range("D:D").Select On Error Resume Next While s "" i = i + 1 ReDim Preserve L(i To 1) L(i) = s Wend If i = 0 Then MsgBox "No dates found" End If Exit Sub
For i = 1 To UBound(L) V = WorksheetFunction.VLookup(s, Range("Inputs"), 2, 0) Next i End Sub
I've written a Fantasy Football programme, which is 100% working, however I would like to have the highscoe table update automatically, rather than using the data/sort command. E-mail me and I'll sent it to you with what I'm trying to do.
My problem is, when i add a new row to the main table, say with a date of "December 20, 2008", and refresh the pivot table, the information ends up clear at the bottom (in this case, after the year 2014).
I figured the pivot refresh would place the data among the other December 2008 rows in the pivot table.
I have a pivot table on a hidden sheet and a combo box the user picks from. I would like a macro or formula that could change my pivot table Page Value to that which is chosen from the combo box. Then update the pivot table. I can then use my report to look up values from this pivot as needed.
I have entered all the formulas into my table (sheet 1) referenced to the source data but I want to upadate the source data regularly but when I delete sheet 2 all the formulas come up with #Ref error. how i can update my source data so my table automatically updates
I created a Pivot Table with employees summarized or total hours, which also totals up their billable charges. I would like to "read" the pivot table & break it down to the employees weekly or monthly hours & billable.
I was going to use the following function, but can't use because there is not a column that finds the employee's name several times:
Also, I was going to upload an example & removed some confidential content from the original log file in which the pivot table(s) came from but don't see the pivot tables updating or giving error messages from lost data.
How does that pivot table update then? I hope I don't have to re-create it again.
