I need a formula on Cell C3 on the attached Sheet1.
This should add numbers from the Actual columns as they are updated; i.e., as soon as I populate 'Actual' columns such as F, I, L, O, R... Cell C3 should add up the numbers automatically. This way I don't have to update the Cell C3 manually each week I populate the Acutal columns.
I believe it should be quite a simple thing...and probably has something to do with the OFFSET function...but I cannot seem to put my fingers to it.
All details are mentioned in the attached ZIP file...so I won't repeat myself here.
I have set of range contains in column partner name & Wks from 1 to 5 In row range. i want get result into L2:P10 range from wks table
criteria is <85% where find in between wk 1-5 get result count of <85% and get % & what week the value is?
For example: if One partner contains 2 wk less than <85% then result like 1st 56% WK-1,2nd 58% WK-2
Find the attachment : Pack.xlsb
I have the following data:
Column A = Date
Column B = Reservations made per day
For ex:
A B
1 3/1/2011 5
2 4/5/2011 10
3 3/8/2011 15
Then I have a look up table where based on the date ranges it assigns a week number.
WeekDATE Range 1Date Range 2
718-Feb-1124-Feb-11
825-Feb-1103-Mar-11
904-Mar-1110-Mar-11
1011-Mar-1117-Mar-11
1118-Mar-1124-Mar-11
1225-Mar-1131-Mar-11
1301-Apr-1107-Apr-11
1408-Apr-1114-Apr-11
1515-Apr-1121-Apr-11
1622-Apr-1128-Apr-11
I am looking for a fomula that would assign a week to the corresponding dates on column A and tha would then add all of the reservations booked for each week.
I was wondering if there's a way to add a formula to calculate week over week % change automatically every week when I enter in new data. see the attached excel file for reference.
What I would like to have is the ability for the formulas in c5 and f5 to be able to auto-update to the newest week and the previous week's data instead of manually having to update it each week. So if I were to add a new row with data for week beginning 12/2, the formula in c5 and f5 would automatically update to calculate the week over week variance. I tried researching prior to asking the question on this forum, and I think it may be possible to do it using the index match function, but I'm not sure how to apply it in this case.
I'm trying to write a formula that will tell me when its week one or week two, week three and week 4 based on a given date of any month.
I'm using weekday formula but no luck.
I have a (required) time sheet on which I'm tracking comp time hours. There are 52 worksheets in the workbook for the year (of course), each of which contains daily and weekly hours.
On the summary page, I have the following columns:
2009 Carryover
2010 Wks Worked
Wks x Std. Hrs (Col 2 x 40)
Actual
"Diff (Comp/ OT)"
Comp time taken-2010
Comp time remaining
What I'd like to do is have the 2010 wks worked column (#2 in the list above) automatically add +1 each calendar week, but I can't figure out how to do it.
For example, as of 12:00 AM on Sun, Jan, 10th, the value in 2010 wks worked should be 1. On Jan 17th at 12:00 AM, the value should be 2, and so-on throughout the year.
Is there some script or formula that can be run that would tie in to the calendar date/time to accomplish this task? I'd also like to have a more elegant solution for calculating actual hours than adding each separate "weekly hours" cell from 52 spreadsheets - works fine.
I have a worksheet with 13 tabs, each tab represents sales for each week of a given quarter, i.e. 13 weeks.
Each sheet breaks down sales by dept (20 Dept's) and compares This Week v Last Week.
Having completed Week 1's figures, what is the simplest way to copy Week 1's "This Week" into Week 2's "Last Week" Figures and so on for ultimately, all 13 weeks, without manually copying basic formula from one sheet to the next, 13 times?
I currently am trying to refine some spreadsheets at work (hospital setting). The type of files im working with are medication sheets where on the left it states the medication and to the right of it, the cells have the days of the month(1-31) but I need them to change depending on the day they come into our facility. Above the numbers i would also like it to say the day of week with the first initial (M, T, W, T, F, S, S) in the cells are the top. It is something that we have to make for each day it it gets really annoying and is a waste of time moving the dates over for every day. find a way where I can open the file and the numbers and letters are all in the right place without having to change it for the day that the patients are coming in.
View 3 Replies View RelatedI am compiling a spreadsheet to determine various membership levels of Regular, Bronze, Silver, and Gold, which is based on the number of volunteer events attended at our organization (cell A1), as well as the level of giving (cell B1). Regular is the lowest level, and Gold is the highest.
Now let's say that I am looking for a formula that will be entered into cell C1. This formula would read cell A1 and cell B1, and then return the value that is the higher value. So, let's say the formula in cell A1 returned the value "Silver" and the cell B1 returned the value "Gold", ultimately, the formula in cell C1 would read these two cells, make the determination that the value "Gold" is the higher value, and return "Gold" in cell C1.
I need to use Options>View - Zero Values.", "style="background: #FFFFFF;padding: 2px;font-size: 10px;width: 550px;"");' onmouseout='GAL_hidepopup();'>formatting-limit.htm" target="_blank">conditional formatting with more than 3 conditions. I have found a result for this when the formatting is being done to the cell containing the number but I need a different cell to be formatted. For example:
am pm
xx
xx
xx
xx
xx
xx
66
I need the cells marked by an x to go different colours depending on what number is in the final row of each column.
I have a formula utilizing a random number generator that produces a new number every time I hit the F9 button. I want to accumulate 1,000 values for these numbers, but I don't want to take the time to write down each number (copy and paste). I would like to simply hit F9 and have the value stored in a cell that then steps down so when I hit F9 again it records the new number, so at the end of the sampling, I end up with a column of 1,000 numbers
http://www.triplescreenmethod.com
http://www.twitter.com/triplescreen
Is there a macro that automatically saves a backup of your spreadsheet every week?
View 3 Replies View Relatedi got a problem with date range.actually i wanna to insert date range automatically which is referring current week.
View 2 Replies View RelatedI want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB"
(2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB".
(3) then automatically run a recorded macro named "BoldFirstName"
See attachment.
I need to make a table for an injury category per shift per week. (Falls per shift per week)
I have attached an example of the spreadsheet. I have a formula in the table now that was calculating just the injury type per week but just need to add the function to read per shift but can't seem to get it to read correctly.
My spreadsheet is set up so that Column A has dates and Column B has a value. How can I calculate the total number of values for each day of the week? I've tried a few formulas but they either didn't work or didn't actually take the value into consideration and just counted all the 'Mondays'. I'm not sure if that's clear enough, but if we're just looking at Mondays to simplify it:
Monday, 1 January 2000: 2
Monday, 8 January 2000: 5
Monday, 15 January 2000: 0
Mondays: 7
I am trying to fill a table of the last 12 values for the purposes of creating dynamic charts. I remember last time i used named ranges, offsets etc etc but been too long to remember how.
Ive attached a worksheet to explain it better.
I should probably mention, I want to be able to change cells C1 and C2 to update the values. Everything else wil be rather static.
Attached File : Test.xlsx
I am new to VBA & not sure of the full understanding of code copied from a workbook which worked on the same principle but with Monthly (12) tabs. I thought if modified to show weeks, the macro would be able to locate the current week tab & day/date within - but upon opening, the cell stops at WK19 & column O - rather than WK43, Column N (which changes daily).
Sub Auto_Open()
week(1) = "WK1"
week(2) = "WK2"
week(3) = "WK3"
week(4) = "WK4"
week(5) = "WK5"
week(6) = "WK6"
week(7) = "WK7"
week(8) = "WK8"
week(9) = "WK9"
week(10) = "WK10"
week(11) = "WK11"
week(12) = "WK12"
week(13) = "WK13"
week(14) = "WK14"
week(15) = "WK15"
week(16) = "WK16"
week(17) = "WK17"
week(18) = "WK18"
week(19) = "WK19"
week(20) = "WK20"
week(21) = "WK21"
week(22) = "WK22"
week(23) = "WK23"
week(24) = "WK24"......................................
what is the equivalent command to WEEKNUM if I want to properly calculate Week # of Month?
For example (Sunday being the first day of the week):
January 5th 2008 = Week 1 of January
January 6th 2008 = Week 2 of January
February 2nd 2008 = Week 1 of February
February 3rd 2008 = Week 2 of February
WEEKNUM perfectly calculates this, but it is applicable for the whole year.
Is there a way to create a date formula that will only display the Friday date with in any given week?
View 7 Replies View RelatedI have a Pivot Table with fields for months and weeks. I also have a "Show Values as % Difference Field" that shows monthly or weekly % change. When I collapse the fields so that it goes from weekly to monthly (or vice versa), I have to manually change each Show Values As % Difference column. Is there a way to do this automatically or quickly?
View 1 Replies View RelatedI uploaded an example file.
Now, what I need to accomplish is that the D1 and D3's in sheet 2 need to result in a date next to the correct country (the date (in full) must be the first monday of the correct week). I find it quit difficult to do this because in sheet 2 you have once the country name, but several possible dates. So in sheet 1 there must be a date for every D1 or D3 but under each other.
The second problem is that I need to accomplish to get a "x" in sheet 3 under the correct month where there is an D1 or D3 in sheet 2 (week).
So I need to go from a week to a month and this can be for one country 1, 2, 3 or even more months (it depends from the D1 and D3's in sheet 2).
I need to be able to keep a running count of how many gallons of gas i put in my car each week. Each week is one column. Column A is where i want the total to show.
column B,C,D,E...etc is where i put the numbers in this is all in row 1 for now.
currently i have =sum(B1:BB1). But something is not right because it is not adding the numbers together it will only add what is already there not any numbers that i put in after the formula is made. Do i have the wrong formula or something else wrong. My goal is to see how many gallons i put in at the end of the year, month, quarter, and so i have several other reason for this info.
Is there a formula to return the value of week from 9-6-09 i have on cell a1 and 1-2-10 on cell a2 and i want the total number of weeks on a3.
View 3 Replies View RelatedI am trying to create a week ending formula in excel. I have a list of dates and in a new column I would like to display the week ending of these dates. I want the weeks to end on Sunday. For example, if the date column has the date 7/24/12 in it, I would like the week ending formula to spit out 7/29/12. What formula would achieve this?
View 5 Replies View RelatedI have a sheet (sheet2) that this week has the formula
Cell B2
=Sheet1!D2
Cell B3
=Sheet1!B2
Next week I want the formula to be
Cell B2
=Sheet1!F2
Cell B3
=Sheet1!D2
And so forth.
Each Column has the Week ending date (a sunday) in Row 1. So D2 represents this week and B2 Last week, until next week when D2 becomes the 'last week' and F2 becomes the this week.
The inbetween letters contain another set of data for those weeks so i will apply the same formula to these.
On a excel sheet I've got columns, each column represents a weeknumber. I want to calculate the so-called 4 wk average for each row and for each week and this is the formula I use:
(value*Tvalue)+(value*Tvalue)+(value*Tvalue)+(value*Tvalue)/(Tvalue)
(this is not the actual formula but simplified, that's not really important).
It's the checks that make things a bit more complex. If a value of a weeknr is zero, skip it, but if the next value is also zero, just skip the formula alltogether and make it a zero (or text like "false"). So another thing that has to be accounted for is that if a value is zero, the next weeks value is taken instead.Example (see included file):
I want to calculate the formula (mov 4wk avg) for the third value for week 12, which will make the formula
(0.2*6)+(0.3*6) now there's a zero on week 14 so I skip it, then formula will be:
(0.2*6)+(0.3*6)+(0.6*6)+(0.9*6)/(6).
Right now I'm doing this in VBA with a lot of variables and a lot of if statements.Is there an easier more effective
I know the example sheet is a 2007/2010 version but I need to accomplish this for 2003.
I have 2 columns in my spreadsheet:
B:B is a column of dates.
C:C is a list of names
formula that will count the number of times the name 'SIMON' appears in column C:C but here is the catch: I only want to know how many times that name has appeared over the course of the previous week. IE NOW - 7days
How to solve my problem in attached file : Week Product Level Count.xlsx
View 1 Replies View Related