I have a tab with about 10,000 records with IDs and timestamps (date and time). On another tab I have a list of IDs and start and end timestamps. There are duplicate IDs on both tabs. I want a formula for the 10,000 records tab that checks the ID and timestamp for each row against all the IDs and start/end time stamps of the other column and flags the rows where the ID and timestamp fall within the start/end timestamp on the other tab. It seems pretty simple, and it feels like the code should be something like this (but this code doesn't work):
where F2 is the ID and B2 is the timestamp on the records tab. The "List" tab has the ID in column C and the start/end timestamps in columns F and G respectively.
Basically I want to check if a value is in AC but not AD, I would like to mark it as such in column AE i.e. mark all datevalues in column AD that aren't in column AC.
Could anyone please help with the required formula?.....
I have the below code that works fine. However I want to use a countif function to update Column I instead of manually having to type in the numbers each time they change. I know it would probably be a Worksheet_Calculate Sub but cannot seem to find one that works. The time stamp would be put into column H and the first row of data is row 3.
VB:
Private Sub Worksheet_Change(ByVal Target As Range) With Target If .Count > 1 Then Exit Sub If Not Intersect(Range("I3:I12"), .Cells) Is Nothing Then Application.EnableEvents = False
I've been looking all over for the most basic of VBA codes to insert a timestamp in a single cell (B1) when cell A1 changes due to formula result change. All the answers I've found are for manual updates of A1.
A1 has the simple formula: =SUM(F1:F10000)/3. I would like cell B1 to insert a new timestamp when the results of this formula in A1 change. On a weekl basis, I will paste-value data into the whole F column, which will change the resultes in A1.
If this can't be done, or is too complicated (I don't really write VBA, only copy and paste basic code), is it possible to have a timestamp inserted into B1 based on the paste-value event into the F column?
I am looking for a Macro that would randomly select 20 items from my inventory list for performing spot checks. Column F of Active Coil Log tab is where the data would need to pull from, however I would like all data in the row to go along with it. I've explored the RAND functions, but they don't seem to be the right fit .
I have an excel sheet with 30 names in column A and I'm asked to do the following: Write a procedure – a sub – that uses an input box to ask for a name. The procedure should then scan through the names in the list to search for the name and make a message box to state “X is not in the group” or “X is in the group”, where X is the name from the input box. HINT: You can make a variable “found” that starts with the value 0 and gets the value 1 if the name is found in the list.
Is there a way of checking for a list using VBA? We have a reporting frame work for another application that outputs into Excel, but I have been asked to come up with a way of converting this to XML format.
What I need to do is check for a list named "v10List" on sheet 2 of the selected workbook to make sure it is a file sutible to be converted. Just incase there is any confusion (as there was with me!) it is not a named ranged but a named list.
I have created a list for Cells A2:A10 which has the various roles of person. Gave it a name Designation. I have created a drop down list using this list by going to validation. =Designation
I want a function that would check the value entered and search this list would return TRUE or FALSE
I want to write a formular to initiate an action if a particular text is not in a list For example, I have a list in column D1:D50, and I want the following to happen in say cell A1
If "apple" is not in list D1:D50, then in put "N" in cell A1, else input "Y".
In VB is there a way to check the values in a combo box, to check whether the value you are trying to insert into it exists in the list, if not add it to the list.
how I can check if a cell contains part of a value from a list? Do I need a formula or VBA? (Both would suit)
Example:
A1= BLABLA Apple BLALBA A2= BLABLABLA Orange BLA
List in C1: C1= Orange C2= Apple
If it contains one of the word, I need the function to return the word...
What I have tried:
Search formula Match formula VBA with "If...Like" statement
Keeping in mind that the key word Apple/Orange in A1 or A2 can be located anywhere in the "sentence" (could be after BLABLA or BLOBLOBLO or BLU etc...)
This is something I would then apply to a range (I suppose if it requires VBA, then with a loop which I would be able to manage)...
EDIT: Cells in A1/A2 will never contain two different values from the list (it is either Apple or Orange)...
Set MyRange = ActiveSheet.Range(2,1), Cells(102, 1))
if application.worksheetfunction.Match(ActiveSheet.Cells(5, col),MyRange,0) > 1 then ' it was in the list.....
else 'it is not.... end if
I imagine this isn't the best way and I since I couldn't get past the Set statement. What am I missing? Is the range of dates causing the problem? If my range is one cell in the range it sets the range?
I would like to create a form to select some columns from a list of columns. This could make it simpler for an end-user to chose which columns they want to see in my application. (see my previous question: [url]
Ideally, I would prefer to do that just like rows can be selected in an Excel list. However, I doubt this could be done.
So, to be practical, I would put a button on my sheet. When the user clicks the button, a form would appear and show the current list of columns. The user would mark or unmark to define his view and click ok to get the sheet with only the columns he wants. The number of column in the table can change. When the form loads it must determine what are the columns to include in the list (headers).
What I really don't know is which controls I should use on the form? Are there some list control with tick marks available, for example?
Or, I might dream of a mark-enables combo box or list box, as can be seen often on the web.
What I would like to do is have a macro check a column for any occurrence of a few different numbers, and then enter the text "n/a" in a different column of each row that one of the numbers doesn't appear in.
I have a list of part numbers that require a certain operation, and I'd like to mark off a cell for each item that does not require that operation. I've attached a simple spreadsheet that should help explain this better.
I have several series of 13 figures (from 0 to 20), such as :
000141833000001
I would like to filter those series with the following condition :
Each figure (except the zeros) should be higher or equal to the first figure (found on the right) which is not a zero.
In the example :
14 should be higher or equal to 18 : FALSE 8 should be higher or equal to 3 : TRUE 3 should be higher or equal to 3 : TRUE 3 should be higher or equal to 1 : TRUE
So, the serie is FALSE, due to the fact that 14 is not higher than 18.
I posted my question on another site and didn't get very many responses. I've got a list of alphanumeric numbers that I'm trying to cross check against a bingo grid.
The bingo cards are in a PDF format, so here's a screenshot. There's a separate sheet for Red; White; & Blue.....
I have a list of abbreviations in Sheet 2 and Names of Companies (Full name of Company and short name) in Sheet 1.
What I need to do is check if the abbreviation used in the Short Name Field in Sheet 1 is correct based on the given abbreviation list in Sheet 2.
here is the example:
Sheet 1: Fulll Name of Company Short name AMERIPRISE FINANCIAL, INC. Ameriprise Fin Sheet 2: Abbreviation List Full Version Abbreviation Academic Acad Bank Bk Financial Finl
in the abbreviation list the correct abbreviation for financial is Finl so the short name should have been "Ameriprise Finl" and NOT "Ameriprise Fin". I'd like the rows highlighted in yellow if it is incorrect.
I have a tab with different city names and then a a series of answers to a number of different questions, what I need to do is create a macro which looks a table on a different tab, and if column b matches any of the words in the table to then print that entire row of answers.
So if the information found in R1!M3:M21 is found in Results!B:B then print that row to sheet R1. If the information found in R2!M3:M22 is found in Results!B:B then print to sheet R2 etc.
This is the only other way I could describe it, however I don't think it can be done as a formula anyway (even though it is somewhat gibberish)
IF(ISNUMBER(SEARCH(R1!M3:M21,Results!B:B))print the row,move onto next row)
I have been playing around with this for a bit and now have it sorted out. This is a macro that will check a name list and highlight any cell that contains one or more of the names.
I would like to know if it is possible to have in a single cell the information about the presence of an error in the List1, because a cell of List1 got a value that is not in List2.
I mean all cells in List1 have to contains the same values of List2. It is like a data validation. But it would be nice to have a single cell with "There is an error in your range".
Is there a way to put a time stamp with the users name into an adjacent cell when a cell is updated?
In case that didn’t make sense I will tell you what I need this for. We are creating new time cards that require both employee and manager approval on them. We have many remote employees and getting their signature can be a pain. If they could click a button on the time card that stamped their name and time that would be ideal. They would then send to their manager they would click to verify the time and it would stamp it as well.
I would like to set up an Excel spreadsheet for conducting a time and motion study in a workplace setting where someone follows an employee around to document how much time is spent on a variety of activities. Since the person would have a mobile tablet PC to walk around with and track the data, I would like to capture 3 fields of information:
1) Category of function being performed 2) Start date/time of function 3) Stop date/time of function
For #1, I would like to have a drop down box that appears in each row of Column A with a predefined list (i.e. Activity A, Activity B, Activity C, etc.). For #2 and #3, I would like to create a macro that "timestamps" the current date/time when a blank cell is "clicked".
Whenever I type into field D2 it populates current date and time in field A2 and down the A column as I write into current D columns. The next step I would like to do in which he was able to figure out so far is how to lock in the date and time after something has been typed into D2. If I make any changes to the D2 field it updates the date and time, which I dont want to happen.
Is there anyway to create a timestamp based of a cell linked to a Listbox? For example if the linked cell is in cell C8, cell D12 would stamp the time.
