I have created a list for Cells A2:A10 which has the various roles of person. Gave it a name Designation. I have created a drop down list using this list by going to validation. =Designation
I want a function that would check the value entered and search this list would return TRUE or FALSE
I am looking for a Macro that would randomly select 20 items from my inventory list for performing spot checks. Column F of Active Coil Log tab is where the data would need to pull from, however I would like all data in the row to go along with it. I've explored the RAND functions, but they don't seem to be the right fit .
View 2 Replies View RelatedI have an excel sheet with 30 names in column A and I'm asked to do the following:
Write a procedure – a sub – that uses an input box to ask for a name. The procedure should then scan through the names in the list to search for the name and make a message box to state “X is not in the group” or “X is in the group”, where X is the name from the input box. HINT: You can make a variable “found” that starts with the value 0 and gets the value 1 if the name is found in the list.
I have two very large data sets and I need to see if any of the values on one sheet (B2:B380975) appear on another workbook (B2:B216607).
I know that I can do this with COUNTIF, but it's going to take ages to calculate.
Current COUNTIF formula is:
=COUNTIF('[ORIGINAL.xlsx]data'!$B$2:$B$216607,B2)
=IF(H10=0,IF((R10-I10)>$AH$1,(R10-I10),0),IF((R10-N10)>$AH$1,(R10-N10),0))
I have a small issue with the formula above. Basically the sheet is used to input start and end time of shifts and create breaks and lunches accordingly. The formula above resides in column S. Basically it warns us if the end of the shift is over 4.00 hrs past the end of the last lunches. A shift can have no lunch, one lunch or two lunches. H10 would be the start of the first lunch, R10 is the end of shift, I10 is the end of the first lunch, AH1 = 4:00 or 4:00:00 AM, N10 is the end of the second lunch.
What happens is that if there is no lunch given in cells H, I, M, N or in this case H, I, N then I get a strange number. For instance, I put in 6:00 for the start time [E10] (actually we input military time and the result is displayed in AM or PM) and the end time as 8:00, then I get a result of 8:00 in the S column [titled +4hrs warning). 6:00 to 9:00 results in 9.00 hrs., etc, When we input a six hour shift, a lunch is automatically starts in H10 and ends in I10. Once this begins, the formula works correctly.
I have a list of employees and the dates they worked. I'm trying to formulate an IF function that will check the name of employees in the list against the to the contents of a particular cell and also check the date the employees worked against another cell that contains a specific date, and if both these conditions are met, mark that cell with an X, if not leave it empty.
The formula I have right now is =IF(AND(A2:A27=G4, D2:D27,H3),"X",""). A2:A27 is the range that contains employee names, G4 is the first employee's name who I want to check if he is on the list, D2:D27 is the list of days they worked on and H3 is the date I want to know if this particular employee worked in. Using this formula returns either an empty cell of a #NAME? error. Is this a cell formatting issue?
Can you make the first part (the logical test) be anything other than a numerical value? I want a value to display only if a check mark (using the wingding font for the check mark) appears next to certain items in a list. For example: =If(A1=checkmark,B1+C1,""). If I am not clear maybe I can explain it another way.
View 4 Replies View RelatedIs there a way of checking for a list using VBA? We have a reporting frame work for another application that outputs into Excel, but I have been asked to come up with a way of converting this to XML format.
What I need to do is check for a list named "v10List" on sheet 2 of the selected workbook to make sure it is a file sutible to be converted. Just incase there is any confusion (as there was with me!) it is not a named ranged but a named list.
I want to write a formular to initiate an action if a particular text is not in a list For example, I have a list in column D1:D50, and I want the following to happen in say cell A1
If "apple" is not in list D1:D50, then in put "N" in cell A1, else input "Y".
In VB is there a way to check the values in a combo box, to check whether the value you are trying to insert into it exists in the list, if not add it to the list.
View 3 Replies View RelatedCombining two equations with MOD function for UPC check digit calculation.
I wanted to combine these if possible,
I want to make a drodown list with check boxes to select more than one choice ?Book5.xlsx
View 4 Replies View Relatedhow I can check if a cell contains part of a value from a list? Do I need a formula or VBA? (Both would suit)
Example:
A1= BLABLA Apple BLALBA
A2= BLABLABLA Orange BLA
List in C1:
C1= Orange
C2= Apple
If it contains one of the word, I need the function to return the word...
What I have tried:
Search formula
Match formula
VBA with "If...Like" statement
Keeping in mind that the key word Apple/Orange in A1 or A2 can be located anywhere in the "sentence" (could be after BLABLA or BLOBLOBLO or BLU etc...)
This is something I would then apply to a range (I suppose if it requires VBA, then with a loop which I would be able to manage)...
EDIT: Cells in A1/A2 will never contain two different values from the list (it is either Apple or Orange)...
I need a formula to check if anyone from the Old employee col(B) exist in current employee column(A).
A B
Current employees Old employees
A C
B G
C T
D
E
F
G
I have a tab with about 10,000 records with IDs and timestamps (date and time). On another tab I have a list of IDs and start and end timestamps. There are duplicate IDs on both tabs. I want a formula for the 10,000 records tab that checks the ID and timestamp for each row against all the IDs and start/end time stamps of the other column and flags the rows where the ID and timestamp fall within the start/end timestamp on the other tab. It seems pretty simple, and it feels like the code should be something like this (but this code doesn't work):
=IF(AND(F2=List!C:C,B2>=List!F:F,B2<=List!G:G),"Y","N")
where F2 is the ID and B2 is the timestamp on the records tab. The "List" tab has the ID in column C and the start/end timestamps in columns F and G respectively.
I've two lists of text - one long with multiple words and one short with one or two words. (sample data: [URL]
I would like to check if List A has the word(s) present in List B, and return a Y/N accordingly.
dim MyRange as range
dim Col as integer
Set MyRange = ActiveSheet.Range(2,1), Cells(102, 1))
if application.worksheetfunction.Match(ActiveSheet.Cells(5, col),MyRange,0) > 1 then
' it was in the list.....
else
'it is not....
end if
I imagine this isn't the best way and I since I couldn't get past the Set statement. What am I missing? Is the range of dates causing the problem? If my range is one cell in the range it sets the range?
I would like to create a form to select some columns from a list of columns.
This could make it simpler for an end-user to chose which columns they want to see in my application.
(see my previous question: [url]
Ideally, I would prefer to do that just like rows can be selected in an Excel list.
However, I doubt this could be done.
So, to be practical, I would put a button on my sheet.
When the user clicks the button, a form would appear and show the current list of columns.
The user would mark or unmark to define his view and click ok to get the sheet with only the columns he wants.
The number of column in the table can change.
When the form loads it must determine what are the columns to include in the list (headers).
What I really don't know is which controls I should use on the form?
Are there some list control with tick marks available, for example?
Or, I might dream of a mark-enables combo box or list box, as can be seen often on the web.
I have the following data (as below).
Basically I want to check if a value is in AC but not AD, I would like to mark it as such in column AE i.e. mark all datevalues in column AD that aren't in column AC.
Could anyone please help with the required formula?.....
What I would like to do is have a macro check a column for any occurrence of a few different numbers, and then enter the text "n/a" in a different column of each row that one of the numbers doesn't appear in.
I have a list of part numbers that require a certain operation, and I'd like to mark off a cell for each item that does not require that operation. I've attached a simple spreadsheet that should help explain this better.
Use look up to check batches of data a return a value dependent of multiple ifs?
I have this formula from here
=LOOKUP(COUNTIF(C4:C7,""&0),{0,1,2,3},{19.9,29.9,39.9,49.9})
What I am trying to achieve is using the above can it check
C4:C7 Grouped and named "first"
C8:C10 Grouped and named "second"
C11:C13 Grouped and named "third"
If one from each group is selected it returns 1 value, if 2 of each are selected it returns a second value and if 3 of each are selected it returns a third value?
I thought by grouping them it may give me the desired results but all it does is change if I select more than one from any of the groups.
I have several series of 13 figures (from 0 to 20), such as :
000141833000001
I would like to filter those series with the following condition :
Each figure (except the zeros) should be higher or equal to the first figure (found on the right) which is not a zero.
In the example :
14 should be higher or equal to 18 : FALSE
8 should be higher or equal to 3 : TRUE
3 should be higher or equal to 3 : TRUE
3 should be higher or equal to 1 : TRUE
So, the serie is FALSE, due to the fact that 14 is not higher than 18.
I posted my question on another site and didn't get very many responses. I've got a list of alphanumeric numbers that I'm trying to cross check against a bingo grid.
The bingo cards are in a PDF format, so here's a screenshot. There's a separate sheet for Red; White; & Blue.....
I have a list of abbreviations in Sheet 2 and Names of Companies (Full name of Company and short name) in Sheet 1.
What I need to do is check if the abbreviation used in the Short Name Field in Sheet 1 is correct based on the given abbreviation list in Sheet 2.
here is the example:
Sheet 1:
Fulll Name of Company
Short name
AMERIPRISE FINANCIAL, INC.
Ameriprise Fin
Sheet 2: Abbreviation List
Full Version
Abbreviation
Academic
Acad
Bank
Bk
Financial
Finl
in the abbreviation list the correct abbreviation for financial is Finl so the short name should have been "Ameriprise Finl" and NOT "Ameriprise Fin". I'd like the rows highlighted in yellow if it is incorrect.
I have a tab with different city names and then a a series of answers to a number of different questions, what I need to do is create a macro which looks a table on a different tab, and if column b matches any of the words in the table to then print that entire row of answers.
So if the information found in R1!M3:M21 is found in Results!B:B then print that row to sheet R1. If the information found in R2!M3:M22 is found in Results!B:B then print to sheet R2 etc.
This is the only other way I could describe it, however I don't think it can be done as a formula anyway (even though it is somewhat gibberish)
IF(ISNUMBER(SEARCH(R1!M3:M21,Results!B:B))print the row,move onto next row)
I have been playing around with this for a bit and now have it sorted out. This is a macro that will check a name list and highlight any cell that contains one or more of the names.
View 3 Replies View RelatedHere below the case:
List1 in Sheet1:
TEST1
TEST2
TEST1
TEST3
TEST8
List2 in Sheet2:
TEST1
TEST2
TEST3
TEST4
TEST5
I would like to know if it is possible to have in a single cell the information about the presence of an error in the List1, because a cell of List1 got a value that is not in List2.
I mean all cells in List1 have to contains the same values of List2. It is like a data validation. But it would be nice to have a single cell with "There is an error in your range".
I have a sheet which contains a list of products. I have created a check box next to each name with the linked cell in the adjecent column. I have formatted the cell so you can see the TRUE or FLASE.
I need to be able to select different products and then when I run a macro, it places all of the selected products onto the second sheet. I just need it so it lists the products in column A with no blank rows.
Can this be done using Index/Match? Would a macro which achieves all this be possible?
I need macro that will check for list of duplicates in sheet1 and place the duplicate data in sheet2.
I know how to check duplicates in only one column.But now my sheet having lot of columns.
I need to check a range of cells (B4:B35) and see if any of the contents are less than a specified cell (M1) and then show a message, (the message part I can do). I have tried using For Each but I then get the message for every cell that is below the specified cell (which in theory could be all of them). I have also tried using an If Any statement but didnt work.
View 5 Replies View Related