# Count Formula: Count Cells In Column That Are Graeter Than 160

Feb 5, 2010I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.

View 4 RepliesI want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.

View 4 RepliesADVERTISEMENT

I have a file where I want to count number of cells where the value is greater than 0. in the attachment, i just want to populate that count below the column indicated therein. So in the example, desired result is two.

View 4 Replies View Relatedim trying to count all the cells with data in sheet 1 column g but it must omit any cells that have "vs" in it. all cells have scores in like 1-1 2-2 2-1 etc but a few have vs in them and i dont want them counted

View 5 Replies View RelatedI want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.

But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.

E.g

Large Parts Current Stock = 50

(enter in) Large Parts Used = 2

Large Parts Current Stock = 48

(Clear field where 2 was entered into Large Parts used)

(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)

going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....

View 6 Replies View RelatedVBA which would count data in Column F of dump Sheet and paste the count in master sheet B2 Cell.

View 7 Replies View RelatedI need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.

Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.

Examples of the contents of cells in col D with the "Category:" prefix are as follows:

Category: Adversity

Category: Answers

Category: Assurance

Category: Blessings

Category: Build

Category: Change

Category: Children

Category: Choices

Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.

I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.

I am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group.

The attached example explains things a lot better.

I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.

I have a transactional data set with a line for each transaction and I am looking to count the number of documents (each contains multiple transactions) against criteria.....

It looks something like this.....

Column A Column B

Document No Category

11000001 A

11000002 B

11000003 B

11000002 A

11000001 A

Is there anyway to do this without subtotalling for each document and then a count?

I have been using the wrong formula to count total entries in columns and only just found this error. The MAX formula in cell B4 is: =MAX($B$12:$B$36). If the all the rows are full within range F12:F36, then the MAX formula is fine to count the total within range B12:B36 (25) so I thought. But sometimes there are omissions between F12:F36. If there are 2 blank cells anywhere within F12:F36 for example, then B4 needs to show 23 respectively. In the sample WkBk B4 needs to show 8

View 2 Replies View RelatedColumn A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.

View 3 Replies View RelatedABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales

23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4

I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.

in writing a formula that will count the number of times

the store is listed (Column B) when it matches with closed (Column C).

On the table listed below I will return the data using a match.

From this table

A B C

1/8/2006 9:45Store 1Closed

1/8/2006 9:57Store 2Closed

1/8/2006 10:05Store 3Closed

1/8/2006 10:09Store 4Closed

1/8/2006 10:15Store 5Closed

1/8/2006 10:24Store 1Closed

1/8/2006 10:36Store 2In Progress

1/8/2006 10:41Store 3In Progress

1/8/2006 10:50Store 4Closed

1/8/2006 10:58Store 5Closed

1/8/2006 10:59Store 1Closed

1/8/2006 11:15Store 2Closed

1/8/2006 11:22Store 3In Progress

1/8/2006 11:24Store 4In Progress

1/8/2006 11:33Store 5Closed

1/8/2006 11:51Store 1Closed

1/8/2006 11:56Store 2Closed

1/8/2006 11:57Store 3Closed

1/8/2006 12:03Store 4Closed

1/8/2006 12:16Store 5Not Started

1/8/2006 12:23Store 1Closed

1/8/2006 12:28Store 2Closed

1/8/2006 12:57Store 3Closed

To this table

A B C

1/8/2006 9:45Store 15

1/8/2006 9:57Store 24

1/8/2006 10:05Store 33

1/8/2006 10:09Store 43

I have a formula that counts if a date range is present. However I need to change it to count another column only if that date range is present. For example a17 a50000 the user will enter the date of the order. and in column B has the order number. I want the formula to count the order numbers for a data range in column A.

Here is what I have but it is counting the dates in col A not the order numbers in B?

Is there a way to do this without using a macro, but I need it to be in a macro.

Column A has a value I am calling a label, ex. ABCDEF which occurs over and over. Column B has a list of animals, many of which repeat AND will be together if they do repeat. In other words, all rows in Column B with Cows are together, occurring in consecutive rows. I need a macro that will look at each row in column C and increment +1 starting at 0. That will be concatenated with the value in Column A and pasted as a value in column C.

See the linked spreadsheet tabs for Before Macro and how it should look After Macro is run.

[URL] ........

I have a formula that tests the minimum time in a column. If the time is the minimum it gets a PB (Personal Best) notation. My problem is once a season there is a competion that needs to be recorded on the worksheet however I do not want this time for this competion counted in the MIN test or to get a PB allocated. I have worked out how to ignore the PB but I cannot get the MIN test to work properly. Dates of comp are in Col B, data (times) in Col C and formula for PB's in Col D. When a cell in Col B (Dates of comp) = Region I want the MIN test to ignore the value in the adjacent cell in Col C.

View 14 Replies View Relatedproblem is in the same vain as my last thread "Formula to count MIN with condition". In the attached worksheet samples, Col B has competition dates, Col C is time/distance data, Col C (filled down) is the formula that recogises if the time/distance is a PB.

Once a season there is an event "REGION" where I want the formula to ignore the data in Col C adjacent to "REGION". The date of REGION changes every year and could be anywhere in Col B. The first attachment is what the sheet currently looks like and the second is what I want it to record, specifically D11. Even though D10 is a better distance, it would be ignored as it is REGION.

I use this formula to count uniques in Column I if they started with "P" :

=SUMPRODUCT(($I$2:I554"")/COUNTIF($I$2:I554,$I$2:I554&""),N(LEFT($I$2:I554,1)="P"))

Now if I add 2 more criteria it gives a wrong result" :

=SUMPRODUCT(($I$2:I554"")/COUNTIF($I$2:I554,$I$2:I554&""),N(LEFT($I$2:I554,1)="P"),N($F$2:F554=F555),--($G$2:G554""))

as 0.0625

I'm a novice trying to figure out the following:

I have a column, where each cell in the column has one of the following "ratings" entered as text:

excellent

good

fair

poor

How do I count the number of times "poor" AND "fair" are listed in the column? I used the following countif forumla to count the # of occurences of the word "poor":

=COUNTIF(SurveyData1stRoundSortedbyDoc!Y2:Y30,"poor")

...but how do I adjust the formula so that it counts the # of occurences of the word "fair" AS WELL?

I have a sheet with 1 collumn containing dates (typed as date) and formula's (=today()). I would like to count de cells which contain the formula "=today()". If I count the cells containing today's date, it counts the cells containing the typed date and the cells with the formula "=today()" as well. So here my question: Is there a way to make a difference between "dd-mm-yyyy" and "=today()"?

View 7 Replies View RelatedI have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.

View 1 Replies View RelatedI think I am working all around this in Excel 2003 and feel like I am in the neighborhood, but can't seem to quite get there. On sheet1 I have 2 columns of 100s of rows. All of the cells in column A will be filled in with a date as time goes by (1-May-09 for example). Several of them may be 1-May-09 as a matter of fact. In column B, some of the cells will have a number in them and some of them will be empty. On sheet2, I want to construct a formula that returns a count of cells in column B that have a number in them based on a specific date in column A. For example:

AB

1-May

1-May777

1-May

1-May

1-May

2-May999

3-May

2-May

1-May

2-May111

1-May

If I could get the formula right, it would return an answer of 1 for 1-May in the example, because only 1 of the 1-May entries in column A has a number in the adjacent cell in column B. A formula for 2-May would return an answer of 2 since only 2 of the 2-May entries in column A have numbers in the adjacent cell in column B, and so on for the month. If I understand things right, there are too many arguments for COUNTIF. It seems that SUMPRODUCT should work, but I can't make it so.

I am trying to Count (or counta?) cells in one column if they have data but only if within a date range in another column.

So, in the example below, I would want to count how many cells in column E have data in them, but only if the date in column A falls between Jan 1 2014 and Jan 5 2014. (In this case, result should be 4).

A

B

C

D

E

01/01/2014

[Code].....

I have this formula which is counting the number of cells in a column that fall within each calender month.

However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.

In my workbook, B/C:133 have a formula =""

I will need the formula in column E to work if there is a formula that yields a "" in column B and C.

I am creating a chart and want to get a count of only the blank cells in Column D only if there is information contained in Column A (same row). I am using Excel 2003.

View 2 Replies View RelatedI am trying to count the amount of cells in a column (Col H) containing data against a certain date which is displayed in another column (Col B)

Eg.

Col B................-...........Col H

13/06/09.................FIRST LAST

13/06/09.................

13/06/09.................FIRST LAST

20/06/09.................FIRST LAST

20/06/09.................

So that in the sheet next to it it would appear:

13/06/09 - 2

20/06/09 - 1

The dates don't appear in row order and the sheet has a filter on it so I am unable to select the Col H and just use COUNTA

How would you be able to count all the used cells in a specific column?

I know the following would count all used cells in a worksheet but what about a specific column?

i need vba to automate counting the number of nonblank cells in a colum.

i may be in a diffrent colum each time i run this so i need it to be dynamic in that sense

i need to store the result as a variable once i have the result.

i have a feeling the best way to do this would be to calculate it in the bottom most cell.

but i am unsure how to make (C:C) dynamic

=65536-(COUNTBLANK(C:C))

i'm trying to count a range of cells in a column. it seems basic but i can't quite figure out the code. i just want to count the nonblank cells, not the data in them. could i use something like =if a1 = 1 and a10 = 10, counta a1:a10 to count all the cells from a1 to a10?

View 9 Replies View RelatedHow to count cells in a column that are in BOLD

I looked all over couldnt find it.

Copyrights 2005-15 www.BigResource.com, All rights reserved