I am looking for a formula which will allow me to return a value, 1 or True, if any of a number of words or phrases in a list exists in a specific cell. Per the below example, any formula which will achieve the result in column A
For Example:
Sheet 1
Column A
Apples
Oranges
Banana
Fruit Salad
Fruit Smoothie
[code].....
I am currently using this formula to count dates between 2 date periods If specific condition exists.
=COUNTIFS(
Data!S1:S100000,"*KP*",
Data!X1:X100000,">=10/1/2010",
Data!X1:X100000,"=10/1/2010",
Data!X1:X100000,"
I am looking for a formula that will enable me to determine which one out of five thresholds a percentage falls within and the retuns a specific value for the corresponding threshold. Here is an example of the data (only showing three thresholds):
_____A________B_________C____
1 ___0.0%_____50%_____$5.00
2 ___51%______75%_____$15.00
3 ___76%_____100% ____$25.00
Where the values in A1 and B1 are the low and high ends of one range. I would like the formula to determine which range the value falls within and return the value in collumn C (C1 for the A1:B1 range).
I can do this using multiple 'if' statements, but am looking for a much more streamlined way to determine the proper value in column C.
One has numbers the other has "YES" or is blank. I want a formula to look at the second column and where there is a "Yes" then count the number in the same row in the first column.
View 4 Replies View RelatedI am attempting an If Or formula and keep retuning a #Value error, I can't for the life of me figure out why.
This is the formula that I have written.
=IF(OR(H44,H45,H46,H47,H48)="Other:","True","False")
Cells H44,I44,J44 have been merged into one cell (H44), and the same for 45,46,47,and 48 - Could this affect the Formula?
In the attached document i need to work out the following solution for a formula but im baffeled! In the completed column i need to show 'ongoing' if there are any 0's in the 101 - 104 columns and 'completed' otherwise.
View 3 Replies View RelatedWhat I'm trying to do is, create a formula that works like vlookup, except I want to return the value of the cell that is a specified number of cells below the looked-up data in a single column array. So, let's say cell A1 reads "Bacon". In B1, I'd like to put a formula which searches the array for the cell that contains "Bacon" and then returns the value of the cell underneath, let's say the value is "Eggs". Then in C1, I'd like to put another formula which also looks up "Bacon" in the array, then returns the value of the cell that is down two cells from the cell that contains "Bacon", let's say the value is "Milk". And then in D1, a formula that returns the value 3 cells below "Bacon", and so on. All the values here will be text, and not sorted in any specific order. I'll be using Excel 2010.
Please take a look at the attached sheet if it clarifies things.
My objective is to take two different random counts of numbers written in column b, ranging from B9:B66. However I want to highlight the specific fields listed in the example below, and pull random numbers from those selected fields only. Then I want to pull another set of random numbers in the same column B9:B66, however using a different specific set of fields within column B; as shown in the second random formula string. Use the Press 9 feature to randomly select the two different numbers. What this attempt is trying accommplish is selecting one boy, one girl who have assigned numbers adjacent to their names(name field populated in column c).
What am I doing in correctly?
HTML Formula written to B70
=INDEX(B9:B66,RANDBETWEEN(1,COUNTA(B9,B13,B15,B16,B17,B20,B21,B23,B25,B31,B33,B34,B35,B37,B38,B39,B41,B42,B44,B45,B47,B50,B51,B52)),1)
Formula written to B72
=INDEX(B9:B66,RANDBETWEEN(1,COUNTA(B10,B11,B12,B14,B18,B19,B22,B24,B26,B27,B28,B29,B30,B32,B36,B40,B43,B46,B48,B49,B53,B54,B55,B56)),1)
I have 2 sets of data in my excel spreadsheet.
Column A has a bunch of numbers and some duplicates
Column B has the same numbers but lots more and no duplicates
Column C describes what column B number does
All I want is for my formula to return the value in C when A#=b#:b#. The if statement, that I can't figure out how to get it to work right is this. =IF(A2=B2:B1021,C2:C1021)
This is fine if the 1st value is true (meaning a2=b2), the problem is the IF statement returns the 1st value in the array(I think) which in this case is false. An example of the array is below, the result of my formula is always false unless i change B2 to equal A2.
00E200002-Way Mir
00E200012-Way Mir
00E200022-Way Mir
00E200032-Way Mir
00E000E22-Way Mir
I have a number of dates (columns) and under each date there is the demand value (Rows). Also, i have a column that has the current inventory. what im trying to do is to keep on adding the demand in one row (i.e multiple dates) until the sum just exceeds the inventory. After that, i would like to return sum the date at which we stopped adding. the point of this excercise is to see at which month will our inventory deplete according to the demand. Below is an example solved by hand.
Demand
Part #
month 1
month 2
[Code].....
is there a way to test if a list exists on a sheet? I'd like to do something like this:
View 2 Replies View RelatedI'm having difficulty creating an array formula. In a multi-column sheet, I am looking at a column with classes and a column with a date (in the format 7-Oct-09). I need to list the number of a specific class for a particular month (any day). I have tried the following which gives only the number of classes:
=COUNTIF(A4:A2500,"AA")+COUNTIF(H4:H2500,"10/??/09") and
=SUM((A4:A2500="AA")*(H4:H2500="??-Oct-??")) which gives me 0. Maybe an array formula is not the way to do this.
Basically, it is a scheduling of approving or rejecting of request dates. whereby, i will receive the request dates from Google doc form and then i will extract the data from web into the excel. The data i receive will include the ID, Date request and Remarks.
With the Information in hand, the data will then be "plot" into a schedule (which is a year calender that i have created on excel) base on the ID requested from the web and the ID in the excel.
After plotting, i also want to check if the number requested date exceed the quota set PER DAY, if it exceed, then i have to reject, if its not then approve.
So here comes the problem.. After all the dates have reflected on the calender, I want to get the information from the calender result(which is whether the date is approve or reject) back on to respective ID and Dates requested.
I have attached a example excel for clearer view of my explanation.
I have a table that has a number of new starters and corresponding appointments offered, what I originally required was to lookup the chronological date after the new start date.
However this has now been scuppered by my boss who has requested that not only lookup the date, but also add who the appointment is with, but if I do this the first array formula stops working and to tell the trust I'm not to sure how to do it anyway.
ColA contains Purchase Order (PO) numbers and I want to return the department number or project number (which is contained within the PO) in ColB eg.
A B
PO # Department/Project #
AP001234P1234 Want to return everything before the 'P'
PR004444P4444 Same as above
TR2008-1234 No need to change
6501P1234 Want to return everything before the 'P'
I was using IF function but there are too many variables then I thought about the 'P' but not sure how to go about it?
I have two data columns: the first is a list of the last 100 calendar dates, and the second is an ON/OFF (or 1/0 if you prefer) value corresponding to each date. If the last value in the second column list is ON, I want to find how many continuous days the value has been ON for. If the last value in the second column is OFF, I want it to return a zero. Note that in the 100 day span of data, the value may switch between ON and OFF several times, but I only want the continuous, uninterrupted ON days at the end of the date range.
View 8 Replies View RelatedIs there a way with the following formula to tell it that if value return is = to value of cell above then find return next value?
View 6 Replies View RelatedI have a data set, in which Sheet 1 have a matrix of high level showing Engineer, Program and commodity relationship.
I have to create separate sheet for each program on sheet 1, each program sheet should have Engineer name and commodity name from sheet 1.
Multiple commodities and multiple engineers should be separated by definite structure.
find worksheet with input and output (manual) as expected.
let say in cell A6 i have a list
SnG
Cash
MTT
I can pick one of these. If i pick Cash then i want a specific cell to run a specific formula. depending on the item chosen.
So in cell A6 is the list.
in cell B6 an amount will be place and in C6 another amount will be place. the number for c6 will range from a -number to a +number.
But D6 looks to see if B6 meet the requirements for MTT, SnG or Cash depending on which item was selected from the list. and uses the formula below with $c$3 changing from to either $D$3 or $F$3 and comparing the values for the chosen item. the formula changes would look this
=IF(ISBLANK(C6),IF(B6>$C$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$D$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$F$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
Version: Excel 2007 WinXP
I'm basically looking for something almost like an inverse function to INDIRECT. This function would first look at a cell's formula as a text string, parse out the first valid cell reference in A1 format, and return that cell as a text string.
Detail: I have a spreadsheet with cells that point to other values. I would like to get only the row number from the first cell reference in the formula residing in a given cell. For example:
Suppose A1 has the formula =AL267. and A2 has the formula =SUM(AL94:AL235)
I would like a formula in B1 that returns the text string, "AL267" so that I would know this is the first reference.
Ideally it could be dragged down to B2 such that it returns the text string "AL94" (and not "AL235") because AL94 is the first cell reference in A2's
Currently I am copying the formulas after hitting ctl+` and pasting that text into a text editor, followed by text operations to manipulate the results into the desired values. Any solution that didn't involve going out to notepad.
is it possible to have a cell return all matches from a list and have the list of matches reduce as you type, then be able to select one item from the list? this is a typical feature on internet sites, but can it be done in Excel?
View 3 Replies View RelatedI would like to return a unique list of values in column b sheet2 IF the value in Data!A is equal to A1 on sheet2.
I tried doing if formulas and v lookup formals but they dont give a unique list or only include in instance of the associated value.
to creating formulas in Excel!
Basically, all I want is for a formula to tell me if I have matching data in two separate cells. What I have is data entered in cell A1. What I would like is one single formula to check if the same entry has been entered in cells A2:A10 and if so, return a 1, and if not return 0.
I got a pivot table that when selected will give me a value (actually its an ID number) I want in H3. I then got a list of values outside of the pivot table in column J. If H3 matched any of the values in column J, I need a “Warning”, if not “OK”. I have been using the formula =IF(H3=J3,"OK","WARNING") to match selected cells (H3 with J3) but cant get it to work to look down the column list. The OK or Warning is in cell F34 out of arms way!
View 2 Replies View RelatedI have a global list in B column and I want to create a text about the list. If I put "1" in A column, I want my text to be on B11 for the selected items. So excel should do a loop for the selected range and combine the selected items in a new line and give me as an output.
You may see the picture Untitled 1.jpg
In my attachment, I have a worksheet where I need to pick a rating from a combo box or list (Expert, Leading, Applying, Learning, Under Performing). I will be picking this rating 10 different times on this worksheet and the selections will not be the same in all cases so the definition I need won't always be the same.
I would like to return the definition (definitions are detailed on another worksheet, Data Elements) to the cell to the right.
I've tried IF statements but when I make one selection from the combo box, all the combo boxes select the same thing. I've also tried vlookup but can't figure it out and can't find an explanation in layman's terms.
I have long text values that include names in cells A1:A100.
In cell D1:D10, I have a list of names that I would like to check if any of them is found in each of the cells in A1:A100 and if yes, return TRUE in column B.
So in a way, what I need is a a bit like the SEARCH function, only that I need to find multiple FIND_TEXT values. If just one of the names in D1:D10 is found, the formula should return TRUE.
i have a excel 2003 sheet that needs some vlookup formulas
3 columns in total
employee ID Emplyee name Team
i have worked out how to create a dropdown list and return the emplyee name to a cell using vlookup on the emplyee ID column
I have also worked out how to create a dropdown list and return the employee Id to a cell using vlookup on the employee name column
i really want to return all the members of any team into a single cell but when i create a dropdown list it lists multiple entries for example team1 and only returns a single member to my deignated cell
So I have this formula to basically lookup the letters in column L and if certain letters exist, then change those letters to another letter. Here is my Formula:
=IF(L1="A",IF(ISNUMBER(MATCH("B",$L$1:$L$200,0)),"B",L1),IF(L1="D",IF(ISNUMBER(MATCH("E",$L$1:$L$200,0)),"E",L1),
IF(L1="L",IF(ISNUMBER(MATCH("L",$L$1:$L$200,0)),"O",L2),IF(L2="F",IF(ISNUMBER(MATCH("K",$L$1:$L$200,0)),"K",L1),L1))))
For example: if column L looks like
A
B
A
E
D
Then it would convert the A's to B's since there is a B present and D's to E's, but if the B and E hadn't been in the equation then it would leave the A's and D's as they are. WIth this formula the output looks like:
B
B
B
E
E
My problem with this formula is that it only recognizes the first letter in each column. Sometimes I have multiple letters in a column and I need it to recognize them and change accordingly.
For example:
A
D_B
E
I would like to have it change to
B
E_B
E
I have attached a sample workbook that may make it more clear... If a VBA code would work better then I would be open to that as well. Combining question.xlsx
So I have the first part of my equation and it works fine. The equation is in Column D.
=IF(ISERROR(FIND("Van",A7,1)),"",B7*C7+50)
What I want it to do is: Combine the above for Col D with: if the Unit Name Column (A) says anything EXCEPT Van, I want it to multiple Cost (Col B) by QTY (E) and put the total in Col D.