to creating formulas in Excel!
Basically, all I want is for a formula to tell me if I have matching data in two separate cells. What I have is data entered in cell A1. What I would like is one single formula to check if the same entry has been entered in cells A2:A10 and if so, return a 1, and if not return 0.
On the attached spreadsheet A14 and B20 appear the same but VLOOKUP returns N/A. The CELL "FORMAT" function returns "G" for both cells, but the "EXACT" function returns FALSE. If somebody could explain what is causing them to be different I woud be extremely grateful.
View 5 Replies View RelatedI got a pivot table that when selected will give me a value (actually its an ID number) I want in H3. I then got a list of values outside of the pivot table in column J. If H3 matched any of the values in column J, I need a “Warning”, if not “OK”. I have been using the formula =IF(H3=J3,"OK","WARNING") to match selected cells (H3 with J3) but cant get it to work to look down the column list. The OK or Warning is in cell F34 out of arms way!
View 2 Replies View RelatedSo I have this formula to basically lookup the letters in column L and if certain letters exist, then change those letters to another letter. Here is my Formula:
=IF(L1="A",IF(ISNUMBER(MATCH("B",$L$1:$L$200,0)),"B",L1),IF(L1="D",IF(ISNUMBER(MATCH("E",$L$1:$L$200,0)),"E",L1),
IF(L1="L",IF(ISNUMBER(MATCH("L",$L$1:$L$200,0)),"O",L2),IF(L2="F",IF(ISNUMBER(MATCH("K",$L$1:$L$200,0)),"K",L1),L1))))
For example: if column L looks like
A
B
A
E
D
Then it would convert the A's to B's since there is a B present and D's to E's, but if the B and E hadn't been in the equation then it would leave the A's and D's as they are. WIth this formula the output looks like:
B
B
B
E
E
My problem with this formula is that it only recognizes the first letter in each column. Sometimes I have multiple letters in a column and I need it to recognize them and change accordingly.
For example:
A
D_B
E
I would like to have it change to
B
E_B
E
I have attached a sample workbook that may make it more clear... If a VBA code would work better then I would be open to that as well. Combining question.xlsx
So I have the first part of my equation and it works fine. The equation is in Column D.
=IF(ISERROR(FIND("Van",A7,1)),"",B7*C7+50)
What I want it to do is: Combine the above for Col D with: if the Unit Name Column (A) says anything EXCEPT Van, I want it to multiple Cost (Col B) by QTY (E) and put the total in Col D.
I have a database of 6 digit numbers in one column(let's say column A). I would like to put in a 6 digit number in a cell (b1)and have another cell (c1) give me a response as to whether that number exists in the database (Exists or Doesn't Exist).
View 2 Replies View Relatedi need a formula that tells me if a value exists in a column. for example if there is a value in a cell in the b column of 23 no matter where it is, i want cell c25 to return the word "yes".
View 2 Replies View RelatedI am looking for a formula which will allow me to return a value, 1 or True, if any of a number of words or phrases in a list exists in a specific cell. Per the below example, any formula which will achieve the result in column A
For Example:
Sheet 1
Column A
Apples
Oranges
Banana
Fruit Salad
Fruit Smoothie
[code].....
I am currently using this formula to count dates between 2 date periods If specific condition exists.
=COUNTIFS(
Data!S1:S100000,"*KP*",
Data!X1:X100000,">=10/1/2010",
Data!X1:X100000,"=10/1/2010",
Data!X1:X100000,"
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
In sheet 1, I have
Col A Col B
John Sedgwy - R
In sheet 2, I have the following names
Col A Col B
Peter Walker
John Sedgwicky
When I did an array match -> ={MATCH(1,(TRIM($a2)=Sheet2!$A$1:$A$2)*(left(b2,5)&"*"=Sheet2!$b$1:$b$2),0)}
gave me an error but when I did an individual match to both John and Sedgw, it works.
I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 Replies View RelatedI am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
Basically i have one workbook, within which are 2 worksheets.
I'm having to describe it without a template (as aforementioned the site is having a problem at the moment).
In cell H18 of worksheet 1 I HAVE .........''Fixed asset posting FADep007441'' in cell J18 SAME worksheet i have the amount 26.62
I need to match the full column H (Worksheet 1 and values in column J) TO
those in column B4 OF WORKSHEET 2 AND MATCHING this to the EXACT VALUE in E4) .....BUT ANSWER TO BE looked up in (cell N18 of worksheet 1) and if exact the same value and if not the word '' NO''.
I have 2 spreadsheets. Both have a list of part numbers on. Beside each part number i want a formula that tells me if the part number is present in both spreadsheets so its says TRUE. If its not present then FALSE. I've tried using this command but it doesn't seem to work properly =ISNA(MATCH(B2,A:A,TRUE))
I've attached the 2 spreadsheets. Spreadsheet1 is where i need the forumula placed beside the part numbers so if its present in Spreadsheet2 as well it displays TRUE beside the part number in Spreadsheet1.
Current I am using two spreadsheets for similar press and am combining the two. What I need help with this time is currently in cell c9 the formula is =ROUNDDOWN(17.7/C7,0) or =ROUNDDOWN(39.3/C7,0) depending on which press I am using. The presses are shown in cells d34 - q34. Indigo =17.7 gilboa = 39.3. I have added these numbers to a table in the scales tab a24:e26. Is there a way to write a formula in cell c9 on the input tab to combine the 2 above formulas and insert the correct 17.7 or 39.3 when required?
View 14 Replies View RelatedI need column F to be matched to column E, i want to see how many user id's from column F are in column E and for them to be highlighted in column E. note that the user id's might reflect more than once in column E. See attached..
View 5 Replies View RelatedGuys im stuck on the fact of how to pull the correct information through for a named person.as from the example if i place say steve in the named box i would like all of steves scores to appear in the designated boxes.and so on.
View 11 Replies View RelatedI want to match let's say "Elbow" with "Yes" so that when I select the word "Elbow" from a list the word "No" appears on another cell. There are 54 words to match. This is what I'm currently using, however, I could only get to 29 items and I need to match 54.
=CHOOSE(MATCH($J$2:$J$100,{"Abdomen","Acetabulum","Acromioclavicular Joint","Ankle","Arm","Back","Carpus","Cervical","Chest","Clavicle","Coccyx","Elbow Joint","Femur Bone","Fibula","Fingers","Foot","Forearm","Glenohumeral Joints","Hand","Head","Hip","Humerus","Ilium","Ischium"," Joint","Leg","Lower Leg","Lumbar","Metacarpus","Metatarsus","Neck","Patella","Pelvis","Pubis","Radius","Ribs","Sacrum"," Scapula","Shoulder","Spine","Spine - Lumbosacral","Spine - Thoracic","Spine - Thoracolumbar","Sternoclavicular Joints","Sternum","Tarsus","Thigh","Thoracic/Dorsal","Tibia","Toes","Ulna","Upper Leg","Upper Arm","Wrist Joint"},0),"No","No","Yes","Yes","Yes","No","Yes","No","No","Yes","No","Yes","Yes","Yes","Yes","Yes" ,"Yes","Yes","Yes","No","Yes","Yes","No","No","Yes","Yes","Yes","No","Yes")
I want this formula to return zero if it cannot match the value. Right now it is returning #N/A and i don't want that. I just want to return "0" if it can't match it.
View 4 Replies View RelatedI am trying to match three items. I have attached an example of what I'm looking for since trying to explain it here would be confusing at best.
View 2 Replies View RelatedSo Column A has First name, Column B has Surname Column C is empty Column D has list of firstnames, Column E has list of Surnames, Column F has User ID
I want to Look at the Surname in Cell B2 see if I can find a match down Column E, if I do I want to look at the First name next to it in Column D see if that matches Cell A2 and if both match put the User Id in Column F into cell C2
Need to place an Index(Match) formula in Sheet 2 B2 (as for example). The lookup values in Sheet 2 to be matched with Sheet 1 will be A2, B1 and J1.
In Sheet 1 (Edit) I'm only interest in the subtotal and Sheet 2 J1 represents the subtotal for the week that ends with J1 date.
The Index should be the whole Sheet 1 (if possible) for further expansion (and I do have way more than what is presented below).
Edit
HTML removed by RAM and replaced with a new HTML further down.
In Cell AA8, I need a formula that will read the 3-digit number in Col Z8 and count the number of rows where a match is found. The 3-digit number can be in any form, Ex Cell Z8,
972 can be 729,279.
************************************************************************>Microsoft Excel - Tic-Tac-Toe -1 +1.xlsx___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutZ8Z9Z10Z11Z12Z13Z14Z15Z16=VWXYZAA811/18/089729727911/17/0843143141011/16/0836036041111/15/0870670611211/14/08067067 1311/13/08143143 1411/12/08603603 1511/11/08729729 1611/10/08534534 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have the following array formula that identifies the first number in the column I:
=INDEX(I1:I1200,MATCH(TRUE,ISNUMBER(I1:I1200),0))
This formula works fine however I was hoping to expand the range to the entire column. I thought (obviously incorrectly) that the following formula would work:
=INDEX(I:I,MATCH(TRUE,ISNUMBER(I:I),0))
Instead of getting the same result as the first formula, I am getting "#N/A".
I am using an offset match formula to look at a named range of data and create a validation list of property address's based on certain criteria in cell d1.
My question is it appears the information which is status information seems to have to be sorted, otherwise the list doesnt work properly.
is there another formula to accomplish this with out having to sort the criteria in cell d1 ??
This is the formula i am curently using, it works great if "ListStatus" is sorted and not if unsorted.
=OFFSET(AddressDisplay,MATCH($D$2,ListStatus,0)-1,0,COUNTIF(ListStatus,$D$2))
I have attached a formula I have used to extract a value from another sheet (I have also attached where the formula is mean't to extract the value from) . My problem is that this formula is not returning what it should?
The value that should be returned is "416"
I found the following formula, with different sheet and cell references, on someone's site: =OFFSET(CurvCalc!$E$12,MATCH(MAX(CurvCalc!$E$12:$E$10000)+1,CurvCalc!$E$12:$E$10000,1)-1,0)
I googled for the last couple of days but can't find this site again. I have found several that come close like Dave's at http://www.ozgrid.com/News/excel-dynamic-ranges-vba.htm
http://www.cpearson.com/excel/lookups.htm
http://www.cpearson.com/excel/lists.htm
and Microsoft's at
http://support.microsoft.com/default...;en-us;Q152407
Why am I getting the "#N/A"s in the enclosed example file.
View 3 Replies View RelatedI'm having a hard time getting a MATCH formula to return the correct results. See attached workbook. I have a list of names and wish to look for the first 6 characters of each name in another list and return the row number that the 'MATCH' appears in. The formula I am having problems with is in column 'E' of the ' Analysis' sheet. I have entered the expected result in column 'F'.
View 2 Replies View Related