I have a spreadsheet in excel 2003 that has alot of model numbers listed in a single column with a dash. Is their any way I can remove the dash and seperate the numbers into 2 columns?
Current Spreadsheet
Model Number
199-001
200-003
210-081
This is what I'm trying to accomplish
Column B Column C
199 001
200 003
210 081
If Cell A1 Contained 1,154,546,487,47,36,48,47,668 and so on. Using a Formula or Macro how can I get it to take each number(s) before each comma and put it in the next column on the same row?
So using the above example numbers you would end up with 1 in column A1 and 154 in column B2 and so on and so forth.
i'm trying to do is split the contents of the cells in column A in to 2 seperate cells. The contents of the cells in column A are like this: alpha.bravo.charlie. I want to delete alpha and have bravo as the new contents of column A and charlie as the contents of column C.
View 2 Replies View RelatedThe columns A & B need to be split as shown in the table (3 columns as shown in D,E & F)
In column A the hrs needs removing, but there is also some spaces at the front of this text which needs removing.
Column B needs splitting as shown in the table.
******** ******************** ************************************************************************>Microsoft Excel - MAPPED SCHEDULE.xls___Running: 11.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCDEF1 4.3 hrs1-08-739677-00 U1 DC STATOR COOLANT PMP 4.301-08-739677-00U1 DC STATOR COOLANT PMP2 1.1 hrs1-08-739543-00 SW/BD ALARMS FAILED 1.101-08-739543-00SW/BD ALARMS FAILED3 1.1 hrs1-08-739544-00 ALARMS FAILED ON TEST 1.101-08-739544-00ALARMS FAILED ON TESTSheet2 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I'm trying to split the contents of a cell to a new row (with data from other columns on the row copying across) below the originating cells row. Most of the split cell macro posts I've seen split the contents to a new row at the bottom of a range, however I'm looking to split the contents to a new row directly beneath the original row where data will already exist. I don't want to copy over this data I just want to push the data down depending on the number of rows created.
The contents in the cell being split can vary (1:n), so the number of rows needed to be inserted depends on the count. The majority of the contents in the cell is separated by a line feed (Alt Enter) but some may be separated by a tab or comma.
Essentially what I'm trying to achieve is something from this
A
B
C
D
[Code]....
I want to split the contents in a cell using a formula.
For Example, I have ***PavanKumar*** in A1
I want ***Pavan*** in A1 and ***Kumar*** in B1
Using XL07, some of my data looks like this
TY+/*-
PX/*-
TFM/*+
In an adjacent column, I am seeking to display the letters, numbers or symbols that appear before '/'. I would normally solve this little problem with something like =left(A5,2) or some combination of left and len. This method fails when the formula finds a len of 8 when the previous highest len was 7.
I have data in Col A. and i want to split (50 characters) in each row.
I know the formula but dragging formula to following rows is not working.
I have to write the formula manually. I write in b1 B2 and B3 as follows.
I want following
=MID(A1,1,50)
=MID(B1,251,50)
=MID(C1,501,50)
When i drag down the formula to bottom rows it repeat
Desire Formula in COL B
aaa asdf 242424 alkjsaf 32234 asfasf 23234 dfdfdfd
=MID(A1,1,50)
aaa asdf 242424 alkjsaf 32234 asfasf 23234 dfdfdfd
=MID(B2,251,50)
[code]....
I want to copy down the formula to 10k rows. When i select b2 and b3 and drag down i get following results.
aaa asdf 242424 alkjsaf 32234 asfasf 23234 dfdfdfd
=MID(A1,1,50)
aaa asdf 242424 alkjsaf 32234 asfasf 23234 dfdfdfd
=MID(B2,251,50)
aaa asdf 242424 alkjsaf 32234 asfasf 23234 dfdfdfd
[code]....
This is my input:
Col A
asde,dsfts-qwsa/001,asdasd-qwsa,asdas
etert,ttyutt-tww/013,dgdd-tww,dsfsaa
.
.
.
.
.
Col B
qwsa
tww
In Col C.. I want the output to be as
asde,asdas
etert,dsfsaa
Requirement as a text:
I need a macro that removes the value in column A based on the value in Col B.
The data that the macro removes is always between the "," (comma).
What formula could i use to remove everything before the word "Angels Kiss" in this bit of data "1. Angels Kiss" the number can be a double digit at times the only thing that is always the same is the space after the "."
View 9 Replies View RelatedIs there a way to hide the content of a cell that already contains a formula but when you sort it and remove the blanks it not remove that cell?
View 2 Replies View Relatedhow to code the following?
I need to remove an item from a list, find its match in column "A", remove the matching cell and then shift the remainder of the column up to remove the empty cell.
If this helps, there are 5 different sheet names, and I'm working with range A4:Range("A" & Rows.Count).End(xlUp).Row for the items in the list.
To make it as simple as I can:
COLUMN A
one
two
three
four
user clicked on two in the list, so column A now looks like, with no gap between one and three:
COLUMN A
one
three
four
One sheet actually needs it to do the same removal to identical rows in column B as well (i.e. remove A10 and B10, or A45 and B45, etc.)
I have a column with adresses.
Cell A1 contents Road 12
Cell A2 contents Street 555
Now i want to split the content.
In cell A1 Road and in cell B1 12
In cell A2 Street and in cell B2 555.
Is there a macro that can do that?
When I use sum function to add a cell containing a hyphen "-" I would get a #VALVE! result in cell 3.
i.e Cell 1 = 8 Cell 2 = -
I am trying to type in 4-1 in a cell but can't get it to work, what am i doing wrong.
View 2 Replies View RelatedPlease see attached file. In my column L, I'm trying to find a formula that would reference my column J to the table in the data tab. My problem is the data in column J has a hyphen (-) in the number ex.. 047-258-1 and the next tab does not have a hyphen in between the number...ex 0472581. The correct results in cell L3 would be Walmart. How can I adjust my formula to accommodate this hyphen. Can this also be reflected in my pivot table as well?
View 6 Replies View RelatedI want a format that does not accept the point and put the hyphen CPF.
I 123456789-10 format and desire that even putting the point, leave the cell in this format 12345678910.
I know I could use the replace function through the ctrl + l, most wonder if there's no way to customize the cell.
I want to add a hyphen to 2 particular cells if they are blank. The form is populated from another software package with dimensions. If Columns D and E have any blank cells, want to insert a hyphen. Can't use VB because the particular software package will only output to a template with .xlt
If can't do with Conditional Format, then okay I can tell the inspectors to use add by hand
I have to take a range of phone numbers that I have to port from another carrier and manually type them out or copy into another speadsheet, removing duplicate numbers. For example, I have the following numbers:
55532821055553282108
78132821235553282123
55532821625553282163
The results on the next spreadsheet need to be:
5553282105
5553282106
5553282107
5553282108
7813282123
5553282162
5553282163
I am looking for a way to automate this process.
in my sample xls,there are some contents (text) that i don't need. i'd like to remove the duplicate entries from the Consignee Address rows based on the contents of the Consignee City cells. what i mean? lets say, here,the word CHIOS shows 3 times,we dont need that,so we have to delete it in the Consignee Address,and leave it only in the Consignee City
Shipment Number Consignee Consignee Address Consignee ZipCode Consignee City Consignee PhonePieces Shipment Total Weight
0866-03636276 MRS NELLH NIRI LEAFOROS AIGAIIOU 22 CHIOS CHIOS 82100 CHIOS302023288 1 0.11
so,the final text should be like this:
Shipment Number Consignee Consignee AddressConsignee ZipCode Consignee City Consignee PhonePieces Shipment Total Weight
0866-03636276 MRS NELLH NIRI LEAFOROS AIGAIIOU 22 82100 CHIOS302023288 1 0.11
in the second case,we have something like this:
Shipment Number Consignee Consignee Address Consignee ZipCode Consignee City Consignee PhonePieces Shipment Total Weight
0866-03636453MRS KRISTINA L. KALIVION 252 LAMIA -- SELECT STATE -- GR 35100 -- SELECT STATE -- 6954689 1 0.43
here,we want to move the city (LAMIA) ,and replace the -- SELECT STATE -- in the to Consignee City
check the demo file,to see exactly what we need.. DEMO.xlsx
I have attached a workbook stating my problem.
file1.xlsx
I thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
View 3 Replies View RelatedI got problem with typing hyphen in the cell. Every time I type it shows something else like C9, D6 and so on.
View 6 Replies View RelatedHow do you sort a column of numbers with hyphens?
Example #####-###-####.
I want to sort by the 3 middle numbers
Excel has went from using the backslash to using a hyphen. If I try to format the cell, all the date choices use the hyphen, what possibly changed?
View 3 Replies View Relatedi have two columns with account numbers, i need one column with both account numbers, separated by a hyphen, see below the first line would be 10-15.
10 15
10 20
10 30
10 40
10 41
10 41
I have some data in the form of text w/ 8 letters. I'd like to insert a hyphen after the third character. Is this possible using a formula to populate an entire field? Example:
Current format: ABC01234
Desired format: ABC-01234
What is the formula to cover multiple different text that could come up? I could have an answer that is NA, Yes and also a blank cell and if I could I would like to have it set up as follows:
NA = -
Blank Cell = 0
Yes = 1
I am in need of a formula. I have a number like: 23847-2
I want a formula to take this number and add one to the number before the hyphen. I also want the single digit number after the hyphen to be able to be changed.
So in the end: i want the number copied to the next cell, add one to the portion before the hyphen. Then allow the number after the hyphen to be changed manually.
I am setting up a new chart of accounts, with the format xxx-yyyy, where xxx is a three digit department number, and yyyy is the expense account. I am building a spreadsheet to populate the new chart of accounts to be uploaded into our accounting software. I would like to have a cell that takes the xxx from one cell, adds a hyphen, and combines it with the yyyy value. The result would be xxx-yyyy format.
View 3 Replies View Related