I have a series of employee variances and dates for the variances in two columns.
I have another section on the same sheet where I want to track the amount of variances & occurances for certain months.
attached is an example of what I am looking to do.
How to write a macro that will sum daily figures into monthly figures? On the attached spreadsheet I would like to take the daily figures on the amounts on the VRU DAILY worksheet and sum them in the appropriate month on the VRU # sheet.
View 14 Replies View RelatedI have a workbook with each month as a tab Jan 2014- dec 2014. I have a totals page that's has total billings( the sum is adding all the totals of each month). The totals for each month are in different cells based on the number of individual invoices I enter for each month. I have entered jan- march invoices. I would like to put in a formula on my totals sheet that gives me a ytd avg without changing it. ie: d4/3 then next month april d4/4.
View 1 Replies View RelatedI am to the end of my wits - or maybe it's impossible to do the following with formulas?
I have the data like this:
Column A: Date (which is basically the date for the beginning of weeks)
Column B: Month of the date in Column A
Column C: Year of the data in Column A
Column D: Weekly data.
A: DateB: MonthC: YearD: Weekly data
12/11/200612200619
12/18/200612200644
12/25/200612200650
1/1/20071200741
1/8/20071200737
1/15/20071200741
1/22/20071200741
1/29/20071200741
2/5/20072200732
2/12/20072200736
2/19/20072200740
2/26/20072200735
Maybe it's because it's Friday night, but I just can't invent how to do the following:
Create a new column E that would contain the monthly sum of ColumnD across all weeks of this month - but entered only against the first week of that month (that is currently in Column A)
I.e., in my example it should be:
113
empty
empty
201
empty
empty
empty
empty..................
I need to gather total dollar amounts from a column based on their date/month entered.
I have a sample attached, in cell L2 for example I would need to gather all the dollar amounts in Column G that were entered for that month in column B that correspond to the month in column K.
I'm looking for a function that calculates a fee deduction based on the 28th of each month.
I'm paying back £200 on 28th of every month starting 28th Feb and was hoping that a formula could keep track of this...
A
B
C
D
1
£1,300.00
=TODAY ()
2
-£200.00
28/02/13
FUNCTION
How to do it but basically I'm trying to put a formula in D2 as follows:
If Today's date (C1) equals C2 I need B1 to reduce by the amount in B2
How to continue it calculating reductions per month by duplicating the formula...
I am trying to create a document that takes our client PO amounts, tactics/spend line items, and dates from one sheet and averages them across the months that it is eligible, so we can know the total amount of money we can expect to go out from our clients each month.
For example:
Client1 Tactic1 StartDate EndDate TotalAmount
Client1 Tactic2 StartDate EndDate TotalAmount
Client1 Tactic3 StartDate EndDate TotalAmount
Client2 Tactic1 StartDate EndDate TotalAmount
Client2 Tactic2 StartDate EndDate TotalAmount
I have mostly figured this out in a really complicated way with many nested if statements, but there HAS to be a simpler way. There will be lots of hands in this document, so I would like to make it as simple and easy as possible.
I have a table of yearly totals for the amount spent by x. I also have a growth rate for each month so for example in 2001 in jan the growth rate might have been 0.3% and feb 0.5% What I want to do is for each month based on the growth rate and the total produce a value for each month which sum to the total amount. It's also important to note that it restarts each year.
Link for excel file is here: [URL] ...........
I have a selection of data that lists sellout information for 45 different Cable networks. What I'm hoping to accomplish is to have (on a separate sheet) a function that will automatically pull out the top 10 networks based highest sellout percentages and list them in order from highest to lowest. I don't even know where to begin or if it is even possible to set up as an automatic function.
View 3 Replies View RelatedI need to add data from b2:b12,d2:d12,f2:12,h2:h12 and to show the totals in L2:L7
View 5 Replies View RelatedAttached is a sample of a excel file I am using for tracking overtime.
On the sheet labeled tracking I want to gather data of the other sheets based on a date range.
All sheets other than the tracking sheet will be labeled in the date format mm-dd-yy.
On the tracking sheet in cells B2 & B3 will be the date range that I want to gather the data from.
There is 3 columns of data that I want to gather, "Balancing" "Approved" "Unknown".
I would like to return just a sum of these from the dated sheets M3:O42 based on the employee name A3:A42
I have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
I have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
ok lets say you have thousands of rows of raw data and you are running vlookups to pull specific data from the raw data to update your spreadsheet. Your raw data consist of some new ideas so when you vlook up, you get an error. In my case i get about 50 errors all spaced out amoung the thousands of rows or raw data. I would like to create a formula that would go and find the error and output a code/value that already exist in the raw data and output that in Cell D1 for example. The it will go and find the second error and output that into cell D2 and then the third error and output that into D3 and so on.....
The idea is that when its done a list of all the errors will have been created so then i can use other formulas to simple add the new info to the workbook. Instead of search through thousands of rows for the errow.
I'm trying to figure out a formula that will give me monthly average (per person) on the following report. The problem is that people start at different times and sometimes they don't produce in a given month after they have started. Basically I'm trying to get a monthly average from starting month to the last full month, in this case January.
View 8 Replies View RelatedI have data in the following format (columns A & B):
Code:
Day Value
1/1/2002 2.1
2/1/2002 4.8
3/1/2002 0.1
" "
" "
" "
31/12/2011 5.2
I'd like to be able to write a formula so that I can get the daily data averaged over each month, e.g so that I have something like:
Code:
Day Value
Jan 2002 3.3
Feb 2002 4.3
Mar 2002 3.1
" "
" "
" "
Dec 2011 4.2
I'd like the data in monthly averages so that I can graph them. I have read about array formulas and averageif statements, but I can't seem to combine them to make them work.
How can I get a pivot table to calculate the average of the monthly totals and not the average of all the raw data.
Below is a pivot table of the data on the left. When the pivot table averages the months it calculates the average of every single record, 48.83. How can I get it to average the monthly totals:average(apr,may,Jun)= 179.05
Date cost Sum of cost Years Date
4/1/2011 -75.00 2011
2011 Average Monthly Average
4/11/2011 -58.88
Apr May Jun
[Code] ........
I am wanting to calculate a rolling monthly average and a rolling weekly average.
The following cells have the headers k2 has Allan, Cell L2 has Bill, Cell M2 has Charlie, Cell N2 has Don, cell o2 has Ellen and Cell P2 has Flora
Column J3 to J14 respectivley has Jan to Dec
The balance of the cells will have the data.
I then need to plot the rolling averages for each person on a gaph as teh months data is filled.
Below is the table:
Monthly Totals 2012AllanBillCharlieDonEllenFloraJan0.0000.0000.0000.0000.0000.000
Feb0.0000.0000.0000.0000.0000.000Mar0.0000.0000.0000.0000.0000.000
Apr0.0000.0000.0000.0000.0000.000May0.0000.0000.0000.0000.0000.000
Jun0.0000.0000.0000.0000.0000.000Jul0.0000.0000.0000.0000.0000.000
Aug0.0000.0000.0000.0000.0000.000Sep0.0000.0000.0000.0000.0000.000
Oct0.0000.0000.0000.0000.0000.000Nov0.0000.0000.0000.0000.0000.000Dec0.0000.0000.0000.0000.0000.000
I would like to keep an average for 12 months.Each number entered for a month would be averaged with the total months with an entry until all 12 months had entries. I am using excel 2007
View 9 Replies View RelatedHaving trouble working out a macro for this...
Column B with dates and column C with values. I'd like to make another column with the cell value averages based on the date. In essence, calculating daily averages. In turn I will later be adapting it to go through the all sheets in all workbooks.
I can use help creating the following forumla.
In column "A" I have Dates of Variances. In column "E" I have the variances for those dates.
On another sheet I need variances between certain dates. For example, get all variances between the dates 03/28/09 - 04/28/09.
I have the formula for calculating a 13 week rolling average, but I need to be able to set goals in the future and still have the average calculate from current and not from future.
I have my dates set up in row 3 (these dates are all mondays, not every day) and my data in row 4. I need the 13 week rolling average to calculate starting from the prior monday and going back 12 more mondays for the 13 weeks. IE: This monday I'm running reports that the info will be entered into the previous week's monday.
Here is the formula that I'm currently using: =AVERAGE(OFFSET(K4,,COUNT(K4:BV4)-13,,13))
The formula works but will calculate the average for 13 weeks prior based on the last cell with data in it. It's calculating the average of the last 13 weeks of next year.
how to make this work without having to remember my weekly goals every week??
Need formula which can sum Amounts from varying Weekly time periods and the result be recorded in the appropriate month? I've attached a simple example of the way the output needs to look and a sample data table below.
View 3 Replies View RelatedI have created a spreadsheet which creates an average of feedback for trainers in a training company. The form adds up the feedback score into column L of the summary sheet and I have created a summary sheet which I want you use to calculate the average for each trainer.
I have cobbled together an array formula which creates the overallaverage for each trainer based on the named ranges entered via the form.
It looks something like this:
I have a worksheet that has all weekday dates in column 1 and values in column 2. I want to create a 30-day moving average based on the last (non-zero) value in the column 2.
Since every month has a different amount of days, I want it to search the date that has the last value (since I don't get a chance to update it daily) and go back thirsty days from that date and give an average of all the column 2 values skipping and values that are null or zero.
For my example, in column B I have a list of guest names. These names will repeat based on their entries.
In column C I have amounts next to their name.
If the total of all amounts next to their name equal $1,000 or more I want all the rows that their name is in to be highlighted.
I attached an example.
I would like to total numeric amounts based text in another column.
For example, I have a bunch of rows in "column F" with the same text (company name) and in "column I" i have numerics. Is there a way to total "column I" based on the same text of "column F"?
I charge one rate for day work and one for night shifts. My spreadsheet is set to figure the total number of hours worked and I know how to multiply by dollars to get answer #1, but is it possible to use a formula to multiply times a different rate for a night shift?
For example I use =IF(B2
I have a workbook with 12 sheets for monthly results and a Year to Date sheet. For presentation reasons, the monthly results are listed as seen in the first three worksheets, but I want the YTD results to be structured as seen in the fourth worksheet. I have shown how I am currently achieving this in the "Call" section of the YTD sheet, but as there are 12 months and many more variables in the original workbook, I'm wondering if there is any easier way than the one I'm using.
View 4 Replies View RelatedI’m currently pulling data into two columns labeled “Monthly” & “Non-Monthly” respectively. They indicate work orders with a frequency of “Monthly” or “Non-Monthly”
The Monthly data is obtained using the following formula:....