What im trying to accomplish is grab a value from multiple sheets and put them in a main sheet starting at G1. The data is is d1 on all sheets.
Sheet called Summary is the main. Sheet called End is the last one.
=SUM(Template:End!d1)
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedI have a master sheet and 102 'advisor named sheets'. The master sheet is updated daily with information (number and text) along 1 row in different columns (A:W). I would like when the advisors name is typed (W) =joebloggs! for this whole row to be auto input on joebloggs sheet. There can be multiple of these entered daily for same person, so the information would need to populate on the next row so not to type over the previous entry.
View 3 Replies View RelatedLet's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
I have a dynamic range that I need to be able to calculate the standard deviation for. The dynamic range sometimes has blank cells and #N/A cells which I do not want included in the calculation. However, there are sometimes cells with the number 0 in it (instead of blank) which I do want to include. I have come up with an array formula, but the standard deviation it calculates is not correct. The formula is:
=STDEV(IF(ISNUMBER(A3:A20000)*ISNUMBER(A3:A20000),1,0)). *This is an array formula calculated by pressing CTRL+SHIFT+ ENTER. The number it calculates is 0.43, however, this is incorrect. If you just calculate the standard deviation of the actual data points in excel (cells A138:A5055 in this case) : STDEV(A138:A5055), it returns 0.17. This is the correct standard deviation.
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies View RelatedMerge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
I'm currently trying to perform some statistical functions on a range of data but with little success.
I want to "AVERAGE" the range and also do a "STDEV" on the range G8:G107 but some of the cells contain #N/A formula errors. I must have the formula returning #N/A to the cells else my chart on the same range plots the empty cell as 0.
What formula can I use that will let me do the standard average and stdev functions on that range, but ignoring the #N/A errors as if they were simply empty cells?
What I have:
If A1 = "5" (#of wins)
B1 = "2" (#of losses)
Column C = "1" all the way down (represents a success)
Column D = "0' all the way down (represents a failure)
What I want:
A formula that will calculate the standard deviation of the range based on what is input in A1 and B1. So in this example:
=STDEV(C1:C5,D1:D2)
I'm just tired of manually specifying these ranges when the values in the cells hold the length of the range.
I am trying to figure out a code where hides all sheets in "ThisWorkbook" veryhidden except the ones names "Template" and "Report" and "Product"
I tried with the code below but the debugger stops at the line highlighted in red. perhaps i am missing something in the code.
Code:
Option Explicit
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
If Range("rReport").Value = "" Then
Cancel = True
[Code] .........
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
I would like to be able to create monthly worksheets with a date on the tabs with macros.
example1 is my main sheet
example2 is what i would like to end up with, including the layout of example1 on each sheet.
I'm writing a bit of a code that will re-format all sheets in spreadsheet except the three named. I keep on getting compile errors whatever I do. It's driven me mad.
View 3 Replies View RelatedThis should be a fairly simple question, I've already got the code for copying sorted, I'm just curious about several of the named ranges within the sheet and what happens to them when I copy it all over.
I'm working from a spreadsheet made by my predecessor and they've got a template sheet with numerous named rages all scoped to the workbook, on the new template I've created, it has lots of ranges scoped to the sheet itself. The new template works just fine as it is but I just want to try and make sure that when I change over the templates it will continue to work fine and the current template's named ranges are going, so far I have actually copied everything and are running tests, but you can't test for everything, so if the named ranges on the new template being only scoped to the sheet will affect it at all?
I have VBA code that copies over several sheets from a workbook, but I'd rather not have all the named ranges come through. Whenever I run the macro it gives me this notice: "A formula or sheet you want to move or copy contains the name 'rngRegion2', which already exists on the destination worksheet..." The destination sheet doesn't originally have this range already, it runs into problems because the sheets I'm copying have rngRegion2 defined on different sheets. I'd like to try and avoid this problem all together by not copying named ranges if possible.
If thats not a viable option, is there code that I can use to tell it to automatically select "Yes - To use the name as defined in the destination sheet" as opposed to prompting the user to select yes/no?
I have a workbook which needs a new sheet for each day of the month.I normally just create and re-name each sheet with the date...is there a simpler way where i can create the new sheet with a date for each month instead of doing indiviually?
Excel 2010
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies View RelatedI have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
I am trying to use a macro to move a range of excel tabs to the front of the workbook however some of the tabs could be missing due to no information.
If I simply record the macro by moving them manually if the procedure arrives at one that is missing it would report an error.
So in essence I need it to look for the tab and if its there move and if its not move onto the next until it arrives at the last one.
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies View RelatedMy searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
Now what I am looking to do is search my spreadsheet for specific criteria and then copy and paste these rows of information to a new sheet.
In my first spreadsheet that I am using as a database, I want to be able to select any entry from the month and copy it to another spreadsheet named for that criteria.
In other words, I want to find every entry for January, copy just that data's rows and paste them to the January spreadsheet, February to February, etc. My date fields are in column A.
I also want to do the same with representatives names found in column B.
This will break down the data for each rep and each month. Using the filter, then copy and pasting would be cumbersome.
I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")
I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.
the first two lines of code work fine, the msgbox shows "E100:E105", happy days!
However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.
VB:
thisString = "SubjectNames" & strSubjectFamilyOfGroup
MsgBox Range(thisString).Address
Set rngSubjectFamilyRangeOnSubjectUsedSheet = Worksheets("Group to Teacher").Range(thisString)
OK, I have a huge SS with lots of named ranges. Many of which are dynamically assigned lists.
All of the existing ones work fine, but when try to add a new named range, it returns the cells from a previously named range. (Always the same old one.)
example:
A range (one of many) is named "Shift_List" and is defined using
=OFFSET(info!$C$3, 0, 0, COUNTA(info!$C$3:$C$2000),1)
New range is created named "PN_List" and is defines using
=OFFSET(info!AA$3, 0, 0, COUNTA(info!AA$3:AA$2000),1)
When I create a Data Validation List or otherwise use "Shift_List" as the source it works fine.
However if I do the same thing and refer to "PN_List", it returns the items from "Shift_List"
Any new named range returns the Shift_List cells, although older ones still work correctly.
Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.