I'm writing a bit of a code that will re-format all sheets in spreadsheet except the three named. I keep on getting compile errors whatever I do. It's driven me mad.
View 3 RepliesI have a master sheet and 102 'advisor named sheets'. The master sheet is updated daily with information (number and text) along 1 row in different columns (A:W). I would like when the advisors name is typed (W) =joebloggs! for this whole row to be auto input on joebloggs sheet. There can be multiple of these entered daily for same person, so the information would need to populate on the next row so not to type over the previous entry.
View 3 Replies View RelatedI need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedHere is my VBA code so far, it sorts relevant email with data in it into spreadsheet titled "Mon 1st" "Mon 2nd" "Tue 1st" "Tue 2nd" ... and so on
But I've changed the name of the spreadsheet into "yyyy-mm-dd" format, amend the codes.
olMDate = olMail.SentOn
'Amend this line
wsDest = UCase(Left(WeekdayName(Weekday(olMDate) - 1), 3))
If TimeValue(olMDate) < #12:00:00 PM# Then
wsDest = wsDest + " 1st"
[Code].....
I am trying to figure out a code where hides all sheets in "ThisWorkbook" veryhidden except the ones names "Template" and "Report" and "Product"
I tried with the code below but the debugger stops at the line highlighted in red. perhaps i am missing something in the code.
Code:
Option Explicit
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
If Range("rReport").Value = "" Then
Cancel = True
[Code] .........
I need to create multiple copy of workbook from a named range called - CoCode - range is on sheet called - Data - cell range - L2:L37. Problem is that i want each workbook named as the name that is in cell range (CoCode). Also in same workbook in a sheet called - Company Summary , in cell J1 there is validation list that refers to range same (Codode) i want that to change in each workbook.
I.e 1st copy of workbook name is equal to 1st reference in range CoCode and same 1st reference in Validation list in - Company Summary - Sheet in cell J1. Also selecting Validation populates several sheets in workbook to information revelant to that company code selection in cell J1, - there are no external links to this document-
I'm trying to highlight a named dynamic range with background colour yellow - basically moving the yellow section of spreadsheet as the dynamic range changes.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim oldrang As Range
Range(oldrang).Interior.ColorIndex = Null
Range("named").Interior.ColorIndex = 6
End Sub
I am trying to use conditional formatting to basically unhide a named range when a specific text is input into a range of cells from C23:C32. I have taken the named range "Screw_Test" and changed the formatting to make it hidden. White text on white background, that sort of thing. What I would like is to change the background color and text color back to something visible when the following is met. In C23:C32 I have a drop down. When Pedicle screw is picked in any of the afore mentioned cells, it would trigger the conditional formatting that would change the "Screw_Test" range (D22:F32) as a whole, making it visible. I haven't had much luck.
View 4 Replies View RelatedIs it possible to use the same code through a number of named ranges without writting it out for each individual range. I have a table with 7 columns and 30 rows, data inputed to the table and then through code manipulaited on font, fill colour, and cell value(some 25 diffrent options) I have produced working code to pull out data as required for column 1 but it is extremly long, is there some code about I can use to loop my code, (automatically changing the named range within my code to cycle through each of my 7 named ranges)? or do I have to write the code out for each individual named range?
View 4 Replies View RelatedI would like to be able to create monthly worksheets with a date on the tabs with macros.
example1 is my main sheet
example2 is what i would like to end up with, including the layout of example1 on each sheet.
What im trying to accomplish is grab a value from multiple sheets and put them in a main sheet starting at G1. The data is is d1 on all sheets.
Sheet called Summary is the main. Sheet called End is the last one.
=SUM(Template:End!d1)
This should be a fairly simple question, I've already got the code for copying sorted, I'm just curious about several of the named ranges within the sheet and what happens to them when I copy it all over.
I'm working from a spreadsheet made by my predecessor and they've got a template sheet with numerous named rages all scoped to the workbook, on the new template I've created, it has lots of ranges scoped to the sheet itself. The new template works just fine as it is but I just want to try and make sure that when I change over the templates it will continue to work fine and the current template's named ranges are going, so far I have actually copied everything and are running tests, but you can't test for everything, so if the named ranges on the new template being only scoped to the sheet will affect it at all?
I have a spreadsheet that keeps track of the equipment we have on rent. Whenever we have a new rental, I insert a row and enter the information. I have several conditional formats I am applying - (1) making the font a light grey so that it is hard to see on any rental that has been called off, but invoicing isn't complete on, (2) making the font red on any item that is within 3 days of the term, and highlighting any row that isn't showing an invoice in over 45 days. When anything is completed (rental has been called off, and the final invoice has been approved), I cut the row out and put it in a sheet entitled "Closed Equipment". When I cut out closed records or add new records, it will occasionally mess up my conditional formatting by only referencing one row. Additionally, I don't want the conditional formatting to transfer over to the "Closed Equipment" tab.
Would this be easier to keep clean and straight if I used VBA? Or should I just continue to occasionally check my conditional formatting and clean it up? I thought if I used a Named Range instead of cell references, it might work better, but entering named range "On_Rent" converts to the cell range ($A$4:$AA$194).
I am using Windows 8, Excel 2013. The file is on a network drive, and others in the office can look at it (they all run Windows 7, and either Excel 2010 or 2007), but they look at it so seldom.
I have VBA code that copies over several sheets from a workbook, but I'd rather not have all the named ranges come through. Whenever I run the macro it gives me this notice: "A formula or sheet you want to move or copy contains the name 'rngRegion2', which already exists on the destination worksheet..." The destination sheet doesn't originally have this range already, it runs into problems because the sheets I'm copying have rngRegion2 defined on different sheets. I'd like to try and avoid this problem all together by not copying named ranges if possible.
If thats not a viable option, is there code that I can use to tell it to automatically select "Yes - To use the name as defined in the destination sheet" as opposed to prompting the user to select yes/no?
I have a workbook which needs a new sheet for each day of the month.I normally just create and re-name each sheet with the date...is there a simpler way where i can create the new sheet with a date for each month instead of doing indiviually?
Excel 2010
The code below is for a macro that allows the user to create a list of contacts. The column containing the names of these contacts are then referenced by a userform (code not present) by way of a Named Range. I want to update the named range whenever the user adds another contact so this new contact shows up in the user form.
I am currently referencing the range containing the names using R1C1 style, but I cannot get the variable aspect to work correctly.
I have a userform with a spreadsheet in it and I am inserting data into a workbook(my data base) with this application. In the spreadsheet changing event I used "0.00" number format (this is what I need) but the results after I type a number is diferent from what I just typed. i.e: if I type 13.56 there is no problem but if i type 6.56 the number is transformed to 20607.00. I have tryed a lot of methods to stop doing that but all of them failed. how to use decimal number format without this problem
View 6 Replies View RelatedI am trying to use a macro to move a range of excel tabs to the front of the workbook however some of the tabs could be missing due to no information.
If I simply record the macro by moving them manually if the procedure arrives at one that is missing it would report an error.
So in essence I need it to look for the tab and if its there move and if its not move onto the next until it arrives at the last one.
Open a brand new spreadsheet whether the format is set to "General" or "Text" it will not let me enter numbers. For example, when I enter 2007 in the cell it displays 20 07 not really that big of space between the two zeros - but still a space. I can't format this no matter what I do.
View 1 Replies View RelatedI have a small spreadsheet setup for my job where i have to input the time on arrival in L3 which is linked to a NOW() formula. this is it (=IF(L3="",NOW()
View 9 Replies View RelatedIs there a way to format a column or range in a spreadsheet that would prevent other formats from being pasted from another spreadsheet?
Obscure question I know...i.e. column A should always be the same font, size, color, border and text format. I want to prevent the user from copying junk from another spreadsheet & pasting all into column A; similar to paste special > values.
I have attached an excel spreadsheet
how to set a macro to extract the following datas from it.
Game Title
Description
URL
Picture can be set at 1 side to the right of the URL
Now what I am looking to do is search my spreadsheet for specific criteria and then copy and paste these rows of information to a new sheet.
In my first spreadsheet that I am using as a database, I want to be able to select any entry from the month and copy it to another spreadsheet named for that criteria.
In other words, I want to find every entry for January, copy just that data's rows and paste them to the January spreadsheet, February to February, etc. My date fields are in column A.
I also want to do the same with representatives names found in column B.
This will break down the data for each rep and each month. Using the filter, then copy and pasting would be cumbersome.
I created 14 spreadsheets for each of my call center agents to monitor their metrics. I password protected all then placed the originals on the network. The 14 sheets have 1 cell within them that are linked up to their relevant agent cell in a separate spreadsheet. This spreadsheet is located on the network and automatically updates every hour.
I have monitored the the spreadsheets and updates etc for a while now and everything seemed to be working perfect. So I decided to slowly roll it out by placing a shortcut on 3 agents desktops. I quickly discovered that they were not seeing any updates as I had seen prior to the roll out. I go to the folder within the network and check all spreadsheets and I see all spreadsheets working and updating successfully.
So I thought maybe it was because they were password protected. I removed the protection and the 3 agents saw their spreadsheets update successfully on their computers, the next hour as I had hoped BUT the hour following however they did not see a further update again.
I have created a userform but just unsure how to format the code in order to get information to appear in a spreadsheet
http://www.srfl.ca/userform.htm
I have directory with multiple workbooks. Each workbook contains multiple sheets (sheet 1, sheet 2, etc). On each sheet of the workbook, there are various data. The data I am looking to extract from these sheets are in the same cell of each sheet. (See data sheet –datasheet.xls). If I can extract these data without opening the file, it would be preferred. Otherwise, opening the workbook, extract the data, and then close the workbook is acceptable.
Desired Solution:
I would like the assistance to create a macro that will extract data from each sheet of the workbook in the directory at a time until all the workbooks and sheets within the directory are read. The macro shall extract data from cell B5, B6, B10:B20, and sheet name from each sheet of the workbook and copy these data to an active sheet called “US” on workbook, DesireResult.xls. The DesireResult.xls shows how the data should be copied over. Before copying the data to the DesireResult.xls workbook, the macro will prompt the user to enter a cell on the “US” sheet as the starting point to paste the information to. Prompting the user to enter the beginning cell shall happen only once and not for each workbook or sheet being read. The reason for this is because the “US” sheet will already have other data in it. After reading each sheet, the macro shall leave a blank row at the end. The data from the next sheet shall be pasted below the blank row. Note: all the workbooks contain macro and link to other file. When opening each workbook, the macro should automatically choose not to update the links.
On a daily basis I receive a workbook with one single spreadsheet. I then break it into multiple tabs (~ 40 to 50 different sheets). I am trying to apply the same formating as my data sheet (same column width, same row width, landscape for printing, same margins for printing, same headers/footers, etc).
I was originally going to use the macro recorder but ran into the issue that the sheet names are different each day. I tried the following bit of code as a start but keep getting an error.
I have 14 worksheets in a workbook.
All sheets are identical in that they have the same headings within the same range.
I want to apply formatting (bold some text, apply borders, center, etc.), but to all the sheets at once. I know I can do this with a simple loop, but I was wondering if there is a more efficient way of doing it.
I've been playing with
sheet( array(sheet1.name, sheet2.name))
I don't think I have correct syntax or use using the the above.
I tried coding what I would do if I was performing this manually, which is to select all the sheets and apply the formatting to sheet1. Then all the sheets would have the formatting.
I am trying to use VBA to select all sheets and then format
Wrap Text
Freeze at A2
Column Widths
I tried the following code but it is just formatting one sheet.
Sheets(Array("New", "Closed", "Open", "Open_Beg_Month", "Closed WAD")).Select
Range("A2").Select
ActiveWindow.FreezePanes = True
I'm trying to write a macro to select all the Sheets in a Workbook, and set some properties [Auto ColumnWidths, Landscape, and Fit to 1 page wide] for all of them.
I don't know the names of the sheets, nor how many there will be - this part is tagged on the end of a long macro that creates new files and pastes various data into them. The code below only seems to work on the Active sheet - not any of the others selected. Curiously, I can set a specific column width for all sheets, but not Auto Widths.
With ActiveWorkbook
Sheets.Select
With ActiveSheet.PageSetup
.PrintTitleRows = "$1:$1"
.Orientation = xlLandscape
.Zoom = False
.FitToPagesWide = 1
.FitToPagesTall = False
End With
End With
Sheets.Select
ActiveWindow.Zoom = 80 ' This line works!
Cells.Select
Selection.RowHeight = 13.5
Selection.EntireColumn.AutoFit
Columns("C:C").Select
Selection.ColumnWidth = 34 ' This line works
Range("A1").Select