Move Differently Named Sheets In Workbook - Some Missing Due To No Info
Apr 18, 2013
I am trying to use a macro to move a range of excel tabs to the front of the workbook however some of the tabs could be missing due to no information.
If I simply record the macro by moving them manually if the procedure arrives at one that is missing it would report an error.
So in essence I need it to look for the tab and if its there move and if its not move onto the next until it arrives at the last one.
View 9 Replies
ADVERTISEMENT
Dec 21, 2009
However it will only add data to the active sheet when i am asking it to loop through the workbook missing out specified sheets. Would anyone be able to look over the code to see where the error is as to why it will not loop through the remaining sheets in the work book.
View 5 Replies
View Related
Sep 8, 2007
SETUP: I have a shared workbook that is accessed by many people. It is designed to control the flow of work during the monthly close process. These processes are controlled by macros. There are 40 sheets in this workbook.
PROBLEM: On of my location's workbooks frequently loses half of it's sheets in the workbook. Counted in the neighborhood of 14 to 19 sheets go missing.
EFFORTS: I have attempted to Delete, Cut, Move, etc... these sheets with no success.
Only when I put the file in an exclusive state can I manipulate the sheets.
View 7 Replies
View Related
Apr 8, 2009
I know this is a simple operation, but I'm new and a little slow with macros. I've gotten the code I have so far and would like a little more with my next step.
View 3 Replies
View Related
Nov 16, 2009
I have VBA code that copies over several sheets from a workbook, but I'd rather not have all the named ranges come through. Whenever I run the macro it gives me this notice: "A formula or sheet you want to move or copy contains the name 'rngRegion2', which already exists on the destination worksheet..." The destination sheet doesn't originally have this range already, it runs into problems because the sheets I'm copying have rngRegion2 defined on different sheets. I'd like to try and avoid this problem all together by not copying named ranges if possible.
If thats not a viable option, is there code that I can use to tell it to automatically select "Yes - To use the name as defined in the destination sheet" as opposed to prompting the user to select yes/no?
View 2 Replies
View Related
May 12, 2014
I would like to fill in a a form on page /sheet one and have the same info on every sheet that follows is it possible?
View 3 Replies
View Related
Mar 1, 2014
I am having rows of data, that i will be updating from time to time. I want excel to move the latest updated rows, in any column if updated, to move to the top, to easiy know that i updated those records. It should be that when i updated more rows than one, then the first updated cell would be in lower, in order, than the latest updated cells. I do not want any cumbersome vba. I want in formula or in conditional formatting. The row no may be total not limited to some rows.
Because, you naturally would have updated the 200 th record and would have saved. It saved as it is, so when you next opens it it is there, but how can i know that that is the last row of data i edited.
View 5 Replies
View Related
Nov 28, 2009
I have the following macro that I found through Search (written by Peterss) and have been able to modify it to work for me.
Sub MergeBooks()
Dim myFolder As String
Dim myBooks
Dim ws As Worksheet, wsMaster As Worksheet
Dim nr As Long, rws As Long, i As Long
Dim LR As Long
Application.ScreenUpdating = False
Application.EnableEvents = False
myFolder = "C:Documents and SettingsNalaniDesktopForecast"
I have been trying to get the information from the Next Workbook to move over 5 columns (E), then the Next book to move to col (I), etc.
View 9 Replies
View Related
Nov 2, 2008
i need to get certain info from one worksheet to another is there any way to do this automatically
View 9 Replies
View Related
Nov 13, 2006
I need a formula that will take the value of one cell and put it in another cell other than the one in which I am typing the formula. I can't think of how to do this.
I have two columns, A & B (no headers), of information. The columns are not identical, and column B has empty cells scattered throughout the column. For each empty cell in column B, I want to copy the same row of information into it from column A, as if I'm just scooting the information in column A that's on the same row as the empty cells in column B.
This is simple with a cut/paste, but when there's thirty empty cells, cutting and pasting takes time. (What's really frustrating is that I've figured out a few formulas that will copy the information from column A but all the information gets pasted in the column in which I'm creating the formula (say, column F, for example). THAT doesn't help me because the empty cells in column b are still empty!)
View 9 Replies
View Related
Feb 16, 2009
I have several excel files in a folder, and they are named:
AA v.5
AA v.6
AA v.7
AA v.8
BB v.5
BB v.7
CC v.8
CC v.6
The "AA" and "BB" are names of who created it and v.5 are the week it was created.
What I would like to do is in an Excel file be able to choose to retrieve information about for example how man files with v.5 in its name.
OR information about all files with "BB v." in its name (to see all files created bye BB)
Or "BB v.4" (all files created bye BB in week 4)
Or "BB v.4"+"BB v.5"+"CC v.6"
The reason for this is that I would like to be able to create statistics from this so that I can see how it has changed like in a graph. So that I can see the difference and compare how many files BB and CC have created and which week.
View 9 Replies
View Related
Apr 1, 2014
I have a master sheet and 102 'advisor named sheets'. The master sheet is updated daily with information (number and text) along 1 row in different columns (A:W). I would like when the advisors name is typed (W) =joebloggs! for this whole row to be auto input on joebloggs sheet. There can be multiple of these entered daily for same person, so the information would need to populate on the next row so not to type over the previous entry.
View 3 Replies
View Related
Jun 2, 2006
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies
View Related
Jun 5, 2007
I have set up an formula to link data on one excel sheet to another
Ex.
='E:New Folder[MWellComposite_2.xls]Sheet6'!$C$11
This sheet (MWellComposite_2) is automatically generated from a data retrival system
When Sheet6 is not generated it is automatically named Sheet1.
='E:New Folder[MWellComposite_2.xls]Sheet1'!$C$11
Why does it loop back to Sheet1 & Can I stop it
View 5 Replies
View Related
Jun 24, 2014
I need to do VBA coding. Got 12 Sheets for 12 month of Sales. Every Sheets are in same Header Format.
For Column R (Status), there's Filter Data "TRUE" and "FALSE". I have to move/copy "TRUE" item into Sheet Aging 2014.
I manage to transfer using only one Sheets using Advanced Filter VBA, failed with other Sheet.
I attached the file : Sales 2014.xlsx
View 5 Replies
View Related
Nov 25, 2008
I have a workbook with a number of worksheets. (say they are called A, B, C, D). Each sheet is exactly the same.
what i would like to do is look down column A in each sheet in turn and where there is a "y", it will copy the entire row of information (say A to J) to my "master" sheet.
i want it only to copy (not delete) the information, but then enter a "y" in row A for all the columns it has copied.
(thereby meaning the next time i run it, it will not copy those rows again.)
View 9 Replies
View Related
May 28, 2009
my macro is set up to do the following in my book once the user inputs a row of information. the user will go to the opproperate sheet based customer and input all info.
the macro is run (ctrl+z)
the macro takes the last row in the active sheet, and pastes it into the last row of the "ALL" sheet. then it goes and sorts the sheet in order.
i want to adjust it so that the user will input the row of information into the last row of in the "ALL" sheet. then based on the given informaiton, paste the same row in both the corresponding customer and location sheets.
im assuming im going to need to use some variables?
attached is the test spreadsheet.
View 9 Replies
View Related
Aug 8, 2008
I have information in range(p10:Q10) on sheet DEMO! that I want to paste the Values only into a Separate sheet "LIST!" in columns(W:X). The row will vary and will be based on the cell: "DEMO!A3" and will match a cell in column A of "List!"
View 9 Replies
View Related
Aug 19, 2008
Need to move data from 14 sheets (1 pay period=14 days)(2 showing on attachment for example purposes) to time cards for each person (number of employees will vary).
Key data to move to the time card is the date of the hours, #Reg Hours, #OT hours, the ticket# and job# for those hours.(ie Chris Adams Aug 15, need Chris's Reg and OT hours (8 Reg and 2 OT) on his time sheet, and the corresponding ticket number and job number (in this case from I1, I2).
Unknown number of ticket/job numbers, but the pattern of cell entries will remain the same along the top of the date sheets.(starting at I1, then L1, O1, the next would be R1)
Unknown number of employees but they will continue filling down where the names are on the date sheets (column A). Each employee would have a time card sheet as well.
View 5 Replies
View Related
Dec 26, 2013
I'll need to pick up the rates from sheets "SYD" & "BNE" by info from column A of "Summary", which means if the info in column A is "sydney", the formula should pick up the rates from sheet "SYD", if it's "brisbane", the formula should pick up the rates from sheet "BNE".Also, the rate should be matched by the column B,C & D from "summary" page.
View 8 Replies
View Related
Apr 4, 2014
I've started building a macro that loops the sheets and collects the information onto the first worksheet. I've been using Activesheet and activecell references but i'm afraid looping will change these references.
[Code] .....
View 1 Replies
View Related
Nov 4, 2012
How i could this one in formula or macro, first my 1st sheet is just as show below (maybe use for a template)
1st sheet (full list)
fruits
china
orange
0
0
0
0
fruits
china
apple
[Code]...
then 2nd sheet, report i get which something like this :
fruits
china
orange
1
25
1
500
fruits
jiapan
kiwi
2
[Code]...
then i want result like this on 3rd sheet :
fruits
china
orange
1
25
1
599
[Code]....
so basically i want add missing row on sheet 2 from sheet 1
I am using office 2010.
View 4 Replies
View Related
Apr 17, 2008
I have problem about adding workbook event.
when I go to ThisWorkbook and click the left side dropdown at the top of the code window, I can't see the word "Workbook" appear. What I can see is only (General) and there is no other choices.
Other worksheet and application event work fine.
attached is a screen shot when i try to add a workbook event.
View 7 Replies
View Related
Jul 29, 2009
I have a "Generate Table of Contents" button that launches a macro. This macro builds the Table of Contents, creates (3) columns (Patient Name, Date of Pickup, and Frequency), finds all of the sheets in the work book (already renamed to a patient's name), sorts them alphabetically, and lists them under the Patient Name column.
This code works great - The next challenge:
On each sheet (which corresponds to a patient in the database), there is a cell that is filled in that states which day the patient picks up their medication. There is another cell that designates how often they come to pick it up.
I am at a loss as to how to direct the macro to: For each sheet, go to the specific cell, and then report it in the table of contents.
It somehow needs to bind the information together... meaning the patient name, date of pickup, and frequency must be displayed correctly each and every time on the same row.
View 4 Replies
View Related
Aug 26, 2009
In Excel I've always had a Personal file come up when Excel was opened. It may have accidently got closed??? The personal file does not open with Excel and I am unable to find it. It is required to run macros correct?
View 13 Replies
View Related
Sep 18, 2007
I have been searching the forum for weeks now for an solution to my need, but was unsuccessful. I have two Workbooks. One is for tracking new enrollments in the school for whom I work named WVT.xls and the other is for tracking the school materials assigned to each student named 2007.xls (for inventory accounting). I need to streamline adding new enrollments names to both Workbooks by adding to only one manually and then using VBA code to update the names in the other workbook. The sequence would be to type the names into WVT.XLS and run a macro in 2007. XLS to automatically update the names. Below is the locations of the same named columns in each workbook.
First Name Last Name
WVT.XLS Column B Column A
2007.XLS Column B Column C
In 2007.XLS, there is a sheet for each school location that is represented by a unique school code. In WVT.XLS, there is one sheet for all enrollments from the start of distributing materials. Each row is a student. There is a column that contains the unique school code to identify in which school the student has enrolled.
View 9 Replies
View Related
Jul 23, 2012
My friend has multiple workbooks, each containing data. Each worksheet with have the same number of columns but a variable number of rows
Thinking through, what I deduced the simplest thing to do would be this: Have a macro that would Highlight all the data except the title row in the active workbookSwitch to a different workbook called "Consolidation"On the next free row, paste the information
They can then just activate another workbook and run the macro again
View 9 Replies
View Related
Aug 28, 2012
I am trying to move a column of numbers based on the information in another column. I've been looking for about a week and find macros that are close but not quite.
In one column it reads Mobile, Home, or is blank. If the number is a Mobile (column R), the area code (column P) needs to move to column S and the phone (column Q) needs to move to column T and the primary phone (column R) needs to move to column U. Home and blank cells remain as they are.
area (P)
phone (Q)
primary phone (R)
col S
col T
col U
[code]....
View 7 Replies
View Related
Jul 15, 2013
I am trying to figure out a code where hides all sheets in "ThisWorkbook" veryhidden except the ones names "Template" and "Report" and "Product"
I tried with the code below but the debugger stops at the line highlighted in red. perhaps i am missing something in the code.
Code:
Option Explicit
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
If Range("rReport").Value = "" Then
Cancel = True
[Code] .........
View 8 Replies
View Related
Aug 6, 2012
I have written this code and so far all works accept for this bit where I want to add the required data to cells 3,2....nothing happens, no errors, it just doesn't do anything.
Private Sub CommandButton1_Click()
Dim wbo As Workbook
Dim wbn As Workbook
Dim wso As Worksheet
Dim wsn As Worksheet
[Code]....
View 7 Replies
View Related
