Getting A COUNTIF Based On Two Columns
Jan 6, 2009I need to have cell with the total rows of Column E that equals TODAY() AND Column F = "Repair". I have tried various COUNTIFs with not much luck.
View 5 Replies
ADVERTISEMENT
COUNTIF On Two Columns
Jan 27, 2009I've been asked to extend the counting capabilities of my interface to pick up the profession of each person when they answer whatever is selected in the 'Interface' worksheet (cell B2) put them in my interface.
I've been trying various incarnations of SUMPRODUCT along with what DonkeyOte helped me with before, but currently no joy. Hope that makes sense - have a look at previous post for further details. I've attached an example to look at.
Countif Different Columns
Jan 3, 2009I have 16 columns with 10 rows with different single digits in them. I want to count the number of times the number 2 appears in columns A, C, E, G, I, K, M, O (in other words every other column in this case).
I know how to write the formula by using countif to find the results but it is rather long. The fomrula would look like this:
How COUNTIF For Both Columns
Oct 7, 2008I have two columns and have to count all "DATA PAPA" rows
How i can do it?
Countif With Three Columns
Mar 30, 2009I am using this formula
=COUNTIF($C$1:$C$4000,B1)
How can I add a third column D to the formula to check if the value in 'D'
is the same
eg.
A B C D
1-Jan 1-Jan 4523
2-Jan 4523
3-Jan 4523
4-Jan 4501
Countif With Conditions From Two Columns?
Dec 5, 2013I have coded data for age range in one column and for answering yes or no to a question in a different column. I need a formula that will count the number of yes answers for each coded age range.
a= 14-15 years old, b=16-17, ect.
Column One Column Two
age(coded) Yes or No
a Y
a N
b N
c Y
a Y
b N
I need to be able to count the number of yeses for each coded age. If the formula works it should give me the following output given the sample data above.
14-15 year olds output with the data above would be 2
16-17 year olds output would be 0.
How would I write this formula? I tried countif and sumproduct (though admittedly sumproduct I don't know at all and just tried to find a similar situation and tried it with my spreadsheet).
Countif But Columns Not Adjacent
Jan 8, 2009I have a spreadsheet where I need to count the # of times the value 1 is in a row, but the columns that I need to check is every other column.
View 3 Replies View RelatedCOUNTIF For Multiple Columns
Mar 19, 2009I am trying to tally answers for a survey. Column A specifies one of 3 locations (Boulder, Larimer, Westminster) and column C specifies a grade for services between locations (Not Uniform, Slightly Uniform, Very Uniform). I was able to tally each separately using 'COUNTIF' and the conditions, but now I would like a total for each of the grades by location, i.e. a count of people answering both Boulder and Uniform, etc.
View 5 Replies View RelatedHow To Countif Columns Of Dates
Aug 10, 2009I have three seperate Formulas on a summary page that will count dates depending on whether they will be approaching in the next month, whether todays date falls within them and if they are expired or are less than todays date.
Basically the form was developed to monitor a maintanence schedule and give a summary to the person in charge of cleaning so they can forecast there work load. I have managed to get the formula working for "whether todays date falls within them" ("# of Computers than can be cleaned today" as it appears on the summary form) but I cannot seem to get the other formulas figured out.. Well at least the formula that checks to see which computers are past due.
As far as the formula that checks to see which computers will need to be cleaned within the next month, I don't know how to make that work at all considering the setup of my Date input page.
CountIf Blank With Two Columns
Feb 25, 2010counting cells if blank. I have two columns E and J . For example if E5 and J5 are both blank I want that to count as 1.
COUNTIF On Multiple Columns
Jun 6, 2009When using the following:
=COUNTIF(F6:F200,"G")
I get what I want.
What I can't figure out is, I want to get the count of columns G, J, N, and R which has the criterior that I'm looking for, added together for a total.
And in reality, the rows do not go down that far, but they might, so I put 200 in there to be safe.
CountIF Combine The Results From Two Columns
Feb 15, 2009I have two columns A and B. Column A contains 'Machine Nr' and column B contain 'Week Nr'. In cell C1 i want to write a function so that it counts the number of weeks in Column B where week number is 4 AND the machine nr is 1 in column nr A.
Column A Column B
Machine Nr Week Nr
1 4
1 4
2 4
2 4
3 4
3 4
Countif With 2 Columns Of Data And No Duplicates
Dec 26, 2012I would like to use the sumproduct or countif formula for a set of data. I have looked around the forum and have not found what I need so
Column A______Column B
West___________1
West___________2
West___________1
West___________2
South__________ 1
South__________2
South__________1
South__________2
I want to count column B for all "West" (column A) and I don't want duplicates. So it would count two unique characters for West and two unique characters for South. I want "west" and "south" separated.
Array Formula Using Two Columns And Countif
May 11, 2006Having trouble getting Excel to compute a value based on two columns on another sheet. What I need it to do is see if column A has the value I specify, then look in column B and see if that date figure is greater than 180 days, and then count it. So I might have 45 that meet criteria A, but then need to find items in that subset that meet criteria B...
View 9 Replies View RelatedOnly Countif Cells Adjacent To Columns Contains A Blank?
Apr 22, 2014I have a formula (below) where I want it to count the cells that contain a date that is less than or equal to today, but only when the adjacent cell is blank. The latter part of the formula works, but I'm struggling to tell it to only do the count when cells in column I are blank;
=IF('QS12'!I10:I3120="",COUNTIF('QS12'!H10:H3120,">="&TODAY()))
Countif Multiple Conditions: Look At Two Columns And Set A Criteria To Count
Jan 15, 2010I want to be able to look at two columns and set a criteria to count. I want to look at column A and if its blank then look at column B and if it has a value of more than 0 then count.
A B
1 1.00
2 Yes 4.78
3
4 5.00
5 Yes 4.89
6 11.99
So this example would count 3
Countif (check The Data For The Following Conditions, If It Meets The Crirteria Then Place A 1 In Columns)
Aug 22, 2009the traditional count if statement doesnt return what I need. I have an array of values that need to be checked.
Column: A B C D E
Data: .25 .49 .18 (Criteria 1 Result) (Criteria 2 Result)
What I need to do is check the data for the following conditions and if it meets the crirteria I need excel to place a 1 in column D or E.
Criteria 1
If any of the coulmn data contains a value less than .5 I need a 1 placed in column D
Criteria 2
If any of the column data contains a value greater than .5 but less than 1.0, I need a 1 placed in Column E. I tried using an IF/ Count If statement, but cant seem to get it to return the result I need.
Countif Based On Month
Dec 16, 2013Below is my function. I use it to count the number of times a value in A9 appears in Sheet2. I would like to edit my function to count the value in A9 that appeared in a given month in U6.(U6 is 12 for decemeber)
=IF(LEN(A9),COUNTIF(Sheet2!A:A,"*"&A9),"")
This is what I thought it would have been but I think I'm wrong because the function is not counting by month.
=IF(LEN(A9),COUNTIF(Sheet2!A:A,"*"&A9),IF(MONTH(Sheet2!D14:D9000)=U6,"")
COUNTIF Based On Two Criteria
Sep 9, 2007I have data in two columns. Column B has calculated string values of "BMAJOR" and "BMINOR" and column C has date values.
I am trying to get a count of how many occurences of "BMAJOR" or "BMINOR" occur for every week starting today. I have column AJ which returns today() and column AK which returns today()+7. I can individually count number of occurences of dates that fall within these dates with the following formula. This for row 2.
=COUNTIF('Decision Tree'!$C$4:$C$215,"
Countif - Based On Other Cell Entry
Aug 21, 2009dont know if this can be done using a formula rather than VBA...but is there a formula that would change the countif range based on another cell entry. so the formula below has a column range of 2...so the other cell entry would be '2'.
=COUNTIF(B1:C1,"=Y"). If i then changed the cell entry to '4' the formula would change to. =COUNTIF(B1:E1,"=Y")
Countif Based On A Date Range
Jan 13, 2010I have 2 columns, one containing a piece of data and one containing dates. I want to count how many times the data is in the first column, based on a specific date range in the 2nd column. I have attached a sample SSF with a better explanation inside it.
View 3 Replies View RelatedCountif Based On Relative Cell
Jul 15, 2008I have this forumula in a cell:
=SUM((COUNTIF(F7:F69,"<=" & TODAY())),(COUNTIF(B7:B69,">=" & D7)))
and the trouble I am having is that in the second Countif, I need it to check the cell in the "D" column relative to what cell is being checked in the "B" column. Right now it is checking every cell in "B" against "D7" instead of "D8, D9, D10", according to what cell in "B" is selected.
CountIf Frequency Based On 2 Criteria
Mar 26, 2013I worked out the formula below to count if frequency. However, now I need to work it out for 2 criterias.
Count if I:I = A2 and if R:R = Closed
What I have so far is this:
{=COUNT(IF(FREQUENCY(IF(ticketInformation!I:I=A2,ticketInformation!B:B),ticketInformation!B:B),1))}
Smif And Countif Based On More Than One Criteria
Mar 24, 2009I possible to do a sumif and or count if based on more than one criteria. ex:
sumif(range, and(criteria1,criteria2),sumRange)
countif(range, and(criteria1, criteria2))
i try to do like above but it is not working, Is this possible??
Countif Based On Conditional Formats
Oct 16, 2009I need to count the number of rows of active clients. I have set up a conditional format that when someone goes inactive dependent on the reason of inactiveness their entire row of information either gets greyed out or a red line through it. Is there a way to count the current "active" clients- or those that do not have these conditional formats applied to them. And this is also dependent on month, so that it does not show the same number each month.
COUNTIF Formula Based On Cell Formatting?
Mar 18, 2010Is there a Countif that works on the criteria of the font being 'Red' or 'Bold' ? This needs to work based on conditional formatting I have on the cells in question.
View 7 Replies View RelatedVBA Countif To Fill Textbox Based On Two Comboboxes
Jan 30, 2014I need to get TextBox1 to fill with a number.
Basically, I need the textbox to look at spreadsheet 1 and count the number of times a name occurs in a column given a certain week.
ComboBox3 has the name in it,ComboBox4 has week number
So when I press CommandButton1, the script will look at the week, find all instances in that week, rows, look at the name, then count the number of times the name comes up that week. and return that number to TextBox1.
Countif :: Make It Count Till A Particular Row Based On The Value
Mar 11, 2009can i use the countif question to make it count till a particular row based on the value . for instance if i want the countif till value 45 is met i.e i want countif to count till the row where 45 value is housed
VALUES 40404540403047
Countif Function For Counting Values Based On More Then 1 Variable
May 7, 2007I'm trying to make a spreadsheet that will count the number of times a certain incident occurs, for a particular person, for a particular month. The attached spreadsheet is an example of what I need done.
For the attached spreadsheet, I need to find out how many times x employee has been late for x month, and how many times they've been late overall.
You can see one of the many tries I've attempted in the second sheet, but it doesn't seem to want to work. I have to be able to do this without VBA, because of signature issues.
COUNTIF Based On Left 7 Characters Of Item Matched In Range?
Feb 28, 2012I have the following formula which doesn't work:
=COUNTIF(LEFT(proposedenter,7),LEFT(F127,7))
proposedenter is just a named range. I can see this is wrong but how do I base the count criteria on the left 7 characters of an item that is matched in the range?