Countif With 2 Columns Of Data And No Duplicates
Dec 26, 2012
I would like to use the sumproduct or countif formula for a set of data. I have looked around the forum and have not found what I need so
Column A______Column B
West___________1
West___________2
West___________1
West___________2
South__________ 1
South__________2
South__________1
South__________2
I want to count column B for all "West" (column A) and I don't want duplicates. So it would count two unique characters for West and two unique characters for South. I want "west" and "south" separated.
View 3 Replies
ADVERTISEMENT
Jun 18, 2014
I have four columns of data (in column B) across 4 worksheets within the same workbook. The rows in this columns contain text. In some cases the text in various rows of each columns are identical, and in other cases they are unique. There is a percentage in column C for each text in column B.
What I'm trying to do is as follows:
Create a consolidated list of all four columns into a single column (say column A in a separate sheet). Therefore, each row in this consolidated column will have a unique text based value.
Have the percentage value for each unique text based entry in column B of the separate sheet. if the text based contents in the column A row is one of those that had the same entry in the original four columns, then the average of the percentages will appear in column B.
View 1 Replies
View Related
Jun 8, 2013
I have entered the following formula to add up a list of data. =COUNTIF(B7:B100,"*") This doesn't include gaps with blank cells and only gives me the total number of cells that contain text. However, some of the text is duplicated and I only want to count the total number of unique entries in the list.
View 6 Replies
View Related
Apr 4, 2013
This is a very SMALL sample of the data I need to sort through. We have been using filters but the data is growning and becoming far too time consuming using the filter method.
The output I am looking to achieve is something like this, (any format is fine; whether in rows or columns)
SVR1
1.99.99.254
(2) CAT I (display how many CAT I for SVR1)
CAT I: 2011-B-44
CAT I: ST-5546
(2) CAT II (display how many CAT II for SVR1)
CAT II: 2011-B-52
CAT II: 2011-A-21
SVR2
2.5.2.333
(1) CAT I
CAT I: 2012-E-55
(1) CAT II
CAT II: 2011-A-21
COLUMN A, varies from SVR1-SVR1400 (cointains duplicates)
COLUMN B, IP matches SVR name (contains duplicates)
COLUMN C, will be either CAT I, CAT II, CATIII
COLUMN D, will contain duplicates
I have some history of using formulas and nested formulas but this one is really throwing me for a loop. It feels like Inception to me and I'm not really sure where to start!
A
B
C
D
SVR1
1.99.99.254
[Code] .....
View 9 Replies
View Related
Aug 6, 2008
searching between 2 columns (A:B) and finding duplicate emails using some type of formatting that will highlight duplicate emails?
For example?
A B
me@yahoo.comsmelly@yahoo.comegg@msn.comspazz@guno.comdupada@hotmail.comhope@aol.comokay@gmail.comhelp@popp.comhope@aol.comfunky@chicken.com
check@team.com hope@aol.com
I am using MS Excel 2007 and not very experienced, but this is for a marketing golf tournament my company is hosting.
View 9 Replies
View Related
Jan 13, 2014
I have over 400 thousand rows in my data-set and I'm trying to find duplicates using a countif or similar formula. Let's say I have the following:
Blue
Yellow
Green
Blue
Blue
Yellow
Pink
I need the formula to increment the count. So for example, the first time Blue appears, it equals 1, the second it appears, it equals 2, third time is 3 and so on.
And, I need it to actually work with 400 thousand rows. I have tried using the following formulas without success as Excel keeps crashing:
=IF((COUNTIF(T:T,$T2)>1),COUNTIF(T:T,$T2),"")=IF(COUNTIF(T:T,T2)>1,2,1)
That second one equals "2" if there's more than 1, which will work for me as well. Better would be if it increments though.
The purpose of having a count is so that I can pivot the data, then filter out all the "1"s and report on it. Therefore I can't use conditional formatting, or simply using Excels Remove Duplicates feature. I need the same data-set for other pivots and charts.
View 8 Replies
View Related
Aug 22, 2009
the traditional count if statement doesnt return what I need. I have an array of values that need to be checked.
Column: A B C D E
Data: .25 .49 .18 (Criteria 1 Result) (Criteria 2 Result)
What I need to do is check the data for the following conditions and if it meets the crirteria I need excel to place a 1 in column D or E.
Criteria 1
If any of the coulmn data contains a value less than .5 I need a 1 placed in column D
Criteria 2
If any of the column data contains a value greater than .5 but less than 1.0, I need a 1 placed in Column E. I tried using an IF/ Count If statement, but cant seem to get it to return the result I need.
View 5 Replies
View Related
Feb 21, 2009
what I'm after is a macro to check the contents of Column 'A' against column 'B' and display any duplicates in Columns 'C' & 'D'.
N.B. The headings of Columns C & D are :-
C = Value Found in Column A
D = Value Found in Column B
Any duplicate entries logged in columns C & D should be listed in C2,C3,C4....C20 and D2,D3,D4......D20 etc (in effect creating two new lists)
View 5 Replies
View Related
Jan 27, 2009
I've been asked to extend the counting capabilities of my interface to pick up the profession of each person when they answer whatever is selected in the 'Interface' worksheet (cell B2) put them in my interface.
I've been trying various incarnations of SUMPRODUCT along with what DonkeyOte helped me with before, but currently no joy. Hope that makes sense - have a look at previous post for further details. I've attached an example to look at.
View 2 Replies
View Related
Jan 3, 2009
I have 16 columns with 10 rows with different single digits in them. I want to count the number of times the number 2 appears in columns A, C, E, G, I, K, M, O (in other words every other column in this case).
I know how to write the formula by using countif to find the results but it is rather long. The fomrula would look like this:
View 5 Replies
View Related
Oct 7, 2008
I have two columns and have to count all "DATA PAPA" rows
How i can do it?
View 10 Replies
View Related
Mar 30, 2009
I am using this formula
=COUNTIF($C$1:$C$4000,B1)
How can I add a third column D to the formula to check if the value in 'D'
is the same
eg.
A B C D
1-Jan 1-Jan 4523
2-Jan 4523
3-Jan 4523
4-Jan 4501
View 9 Replies
View Related
Dec 5, 2013
I have coded data for age range in one column and for answering yes or no to a question in a different column. I need a formula that will count the number of yes answers for each coded age range.
a= 14-15 years old, b=16-17, ect.
Column One Column Two
age(coded) Yes or No
a Y
a N
b N
c Y
a Y
b N
I need to be able to count the number of yeses for each coded age. If the formula works it should give me the following output given the sample data above.
14-15 year olds output with the data above would be 2
16-17 year olds output would be 0.
How would I write this formula? I tried countif and sumproduct (though admittedly sumproduct I don't know at all and just tried to find a similar situation and tried it with my spreadsheet).
View 5 Replies
View Related
Jan 8, 2009
I have a spreadsheet where I need to count the # of times the value 1 is in a row, but the columns that I need to check is every other column.
View 3 Replies
View Related
Mar 19, 2009
I am trying to tally answers for a survey. Column A specifies one of 3 locations (Boulder, Larimer, Westminster) and column C specifies a grade for services between locations (Not Uniform, Slightly Uniform, Very Uniform). I was able to tally each separately using 'COUNTIF' and the conditions, but now I would like a total for each of the grades by location, i.e. a count of people answering both Boulder and Uniform, etc.
View 5 Replies
View Related
Jan 6, 2009
I need to have cell with the total rows of Column E that equals TODAY() AND Column F = "Repair". I have tried various COUNTIFs with not much luck.
View 5 Replies
View Related
Aug 10, 2009
I have three seperate Formulas on a summary page that will count dates depending on whether they will be approaching in the next month, whether todays date falls within them and if they are expired or are less than todays date.
Basically the form was developed to monitor a maintanence schedule and give a summary to the person in charge of cleaning so they can forecast there work load. I have managed to get the formula working for "whether todays date falls within them" ("# of Computers than can be cleaned today" as it appears on the summary form) but I cannot seem to get the other formulas figured out.. Well at least the formula that checks to see which computers are past due.
As far as the formula that checks to see which computers will need to be cleaned within the next month, I don't know how to make that work at all considering the setup of my Date input page.
View 10 Replies
View Related
Feb 25, 2010
counting cells if blank. I have two columns E and J . For example if E5 and J5 are both blank I want that to count as 1.
View 13 Replies
View Related
Jun 6, 2009
When using the following:
=COUNTIF(F6:F200,"G")
I get what I want.
What I can't figure out is, I want to get the count of columns G, J, N, and R which has the criterior that I'm looking for, added together for a total.
And in reality, the rows do not go down that far, but they might, so I put 200 in there to be safe.
View 9 Replies
View Related
Sep 27, 2011
I have two columns of data, I and M and need to find the cases where duplicates occure in I but the data in M does not match. If the data in M matches then it's ok. I have column I sorted A to Z.
View 1 Replies
View Related
Feb 21, 2009
I have a list of numbers in column A of my Worksheet, and a list of names in column B.
There are duplicates in both columns:
A B
234 John Smith
253 Charles White
461 Mary Carlsson
876 Erica Alvin
954 Joe Brown
234 John Smith
461 Mary Carlsson
The duplicates in column A and in column B are correct, because the same names correspond to the same numbers. I would like a formula or VBA macro, if possible, to detect when there is no correspondence, for example, if the last row above were
A B
461 Ben Wayne - where it should be Mary Carlsson.
Is it possible to check all the rows of both columns and identify errors?
View 9 Replies
View Related
Feb 15, 2009
I have two columns A and B. Column A contains 'Machine Nr' and column B contain 'Week Nr'. In cell C1 i want to write a function so that it counts the number of weeks in Column B where week number is 4 AND the machine nr is 1 in column nr A.
Column A Column B
Machine Nr Week Nr
1 4
1 4
2 4
2 4
3 4
3 4
View 10 Replies
View Related
May 11, 2006
Having trouble getting Excel to compute a value based on two columns on another sheet. What I need it to do is see if column A has the value I specify, then look in column B and see if that date figure is greater than 180 days, and then count it. So I might have 45 that meet criteria A, but then need to find items in that subset that meet criteria B...
View 9 Replies
View Related
Dec 25, 2013
I'd like to delete (shift up) one of each set of duplicates but can't think of a way to do it
THOMAS
PHIL
PETER
JOHN
ALEX
ANDREW
THOMAS
PHIL
JOHN
JOHN
NEIL
PHIL
PHIL
THOMAS
RICHARD
BRUCE
JOHN
JOHN
PETER
NEIL
View 5 Replies
View Related
Jan 20, 2010
I have columns from A to AA and need to count the duplicates in at least 2 columns and accordingly need to give them values on the basis of their ratings (A, B, C, D) and type of work (book, article etc) given in yet other columns.
I tried COUNTIF, but that does not work for multiple perimeters
I tried SUMPRODUCT, =SUMPRODUCT(($G$4:$G$3000=$G28)*($AA$4:$AA$3000=AA28)), but that only gives a multiplication of my input without the possibility of giving new values to the output.
I tried AND(IF( but that did not want to work either really...
I think the solution is ifsum, but I do not know how to use it in this scenario...
I know this all sounds a bit blurry, so let me attempt to make it more concrete.
Author Title Year Rating Type Desired outcome
P Marx I 2005 I A I Book I duplicate
A Hegel I 1923 I B I Article I -
B Kant I 1674 I D I Book I -
A Derrida I 2005 I D I Monograph............................
View 5 Replies
View Related
Jun 6, 2008
I have got a very big list in worksheet "1" which contain of only one column, the column D. There are over 150 000 cells in column D and each cell contains of many members seperated by ";". Some cells in column D have many dozen members. Now i want to generate two new columns out of D in another worksheet "2". The two new columns in "2" should be the colulmns A and B.
View 14 Replies
View Related
Mar 9, 2009
I want to search Column A in sheet1 vs column B in sheet 2. If there is a match, i want copy Column B in sheet 1 and PASTE it to Column E in sheet2. I have a macro (helped by those on here ) that will find the duplicates and copy cells from the cooresponding row only to another sheet.
The tricky thing is, the macro I have makes a complete new sheet. I want to copy the data to column E on sheet2 ONLY if there is a match for that cell. If ther eis nto a match i dont want it to put anything.
View 3 Replies
View Related
Jun 1, 2012
I have two columns of B2 and C2 data in the same worksheet and want to identify duplicates in the columns and return a value of true or false in column D. The formula I have been utilizing is:
=IF(ISNA(VLOOKUP(B2,$C$2:$C$5000,2,FALSE)),0,VLOOKUP(B2,$C$2:$C$5000,2,FALSE))
However, i receive a #REF# return in D. What am I missing ?
View 6 Replies
View Related
Aug 23, 2012
I'm trying to condense my email lists in order to stop people receiving the same email having signed up to several lists. How do I compare 5 different columns to find email addresses which appear in more than one...
View 1 Replies
View Related
Nov 29, 2006
sorting duplicate e-mails across three columns in an Excel spreadsheet.
Precisely, I have three mailing lists (Column A, B, and C) that I would like to sort.
I would like to know what e-mail addresses appear in more than one Column (Mailing List), and I would like to highlight/flag them somehow.
I have attached an example spreadhseet that contains fake e-mail addresses for test purposes. As you can see, some e-mail addresses are duplicated or in triplicate across the 3 Columns. In other cases, an e-mail address may be unique to a specific Column.
In my real spreadsheet, I have approximately 3,500 rows and 3 columns.
View 4 Replies
View Related
