I have a formula (below) where I want it to count the cells that contain a date that is less than or equal to today, but only when the adjacent cell is blank. The latter part of the formula works, but I'm struggling to tell it to only do the count when cells in column I are blank;
=IF('QS12'!I10:I3120="",COUNTIF('QS12'!H10:H3120,">="&TODAY()))
I have a spreadsheet where I need to count the # of times the value 1 is in a row, but the columns that I need to check is every other column.
View 3 Replies View RelatedI want a cell to countif the sum of two adjacent cells is greater than the number in another cell so for instance
Count if f101+g101 is greater than the number stored in cell u12, repeat this for cells f102+g102, right down to f50100+g50100.
I import a text file that displays outstanding parts orders. The order Number column only displays one number even if there are multiple parts ordered I.E. so if three parts are on order then the order number is displayed once with the other two underneath blank. I would like to filter the column that displays the amount of stock that is available so that even if the row has no stock but the other two have all three rows are displayed that reference the order number.
Example Screen
Example.jpg
I have several numbers that are contained in non-adjacent cells. I need to create a cell that will evaluate the cells individually to make sure that they are within a certain range. Once that is done, I want the remaining numbers that are within the range to be averaged. How the heck can I accomplish this task? SUMIF and COUNTIF will not allow me to use non-adjacent cell ranges.
View 9 Replies View Relatedcounting cells if blank. I have two columns E and J . For example if E5 and J5 are both blank I want that to count as 1.
I am trying to sum 3 non-adjacent cells. Some cells are blank, not always in the same row / column, and all are the result of vlookups. I tried: E = I+M+Q, but the result is #value!
-In column E (respectively F, G, H) that's where I want the result of the sum
-In column I (respectively, J, K, L), depending on the row, some cells are blank and some cells contain a number. That's the first term of my sum.
-In column M (respectively N, O, P), I have also blank and non-blank cells, depending on the row. This is the second term of my sum.
-In column Q (respectively R, S, T), also blank or non-blank cells. This is the third term of my sum.
I will need to extend this formula to F=J+N+R, G=K+O+S, H=L+P+T, and probably also a sum with 4 terms where E=I+M+Q+U etc.
I am trying to merge text, in four adjacent cells in the same row (say cells A1,A2,A3 and A4), into a single cell (say cell A5).
I would like a comma or full stop and then a space between each item merged (cell A5).
The text to be merged may appear in any one of the four cells (cells A1 to A4). Those cells without text are blank.
Only where all 4 cells are blank, will I need cell 'A5' to indicate this.
The formula needs to be relative as I will need to copy the formula down the spreadsheet so that it applies to additional rows.
I'm trying every conceivable angle I can think of in vba and coming up empty. What I have is a spreadsheet similar to this:
Column A Column B
1. 1234567
2. 2345678
3. 3456789
4. 4567890 A0001
5.
6. 9876543
7. 9876543
8. 9876543
9. 1234578
10. 3456789 A0002
What I would like to do is to fill in B1:B3 with A0001 and B6:B9 with A0002. The number of rows in each set of data will vary, but the identifier (A000X) will always be located in the row in column B adjacent to the last entry for that set of data in column A and there will always be empty cells between data sets. The number of data sets will also vary.
I've got six columns with drop-down lists in every cell. I don't want column six to be selectable if the first five drop downs don't have data in them too.
Equally, I want the data in column six to be undone if columnns 1-5 are then unselected. Can I do this?
I know that using data validation or VBA is an option but I'm not sure exactly how to set it up this way. I also don't want anyone screwing with what can and can't be entered according to these rules - I want to keep it watertight!
I would like a macro that deletes rows based on having two blank cells in adjacent columns. I have achieved this with the following code however i need it to only delete rows below a certain row. How would i achieve this?
Sub DeleteBlankARows()
Dim r As Long
For r = Cells(Rows.Count, 30).End(xlUp).Row To 1 Step -1
If Cells(r, 3) = "" And Cells(r, 4) = "" Then Rows(r).Delete
Next r
End Sub
how to set up a formula that would count the number of numbers in a column, only if the cells before those cells are blank. In plain English: total the number of occurences in each column, provided the value in cellrow is the first occurence in that row starting at column A. E.G
A
B
C
D
John
x
x
Dave
x
x
Kyle
x
x
Bob
x
x
Count would return under Column A, 1; under Column B, 1; (because row John has a value in AJohn it is ignored), under Column C, 2; under Column D, 0.
Code:.....
I am constantly editing this (we currently have over 100 accounts) and therefore the totals are changing.I have a formula for Total but I need formulas for the other two, based on when the cells in columns F and J are blank or have dates in them: For active, the total is the sum of all numbers in column M but only when there is a date in column F and a BLANK in column J. For yet to enter, the total is the sum of all the numbers in column M but only when both column F and column J are blank. At the moment, my accounts run from row 6 to row 142, with the first line of totals in row 145, however this is constantly expanding.
I am having data of codes in a and c column and the amount for the same code in b and d column. I want the sum of amount of codes in the two columns b and d, if the same code matches in the a and c column .
I am enclosing the excel file. Why a formula contains those things.
sumif.xlsx
I would like to highlight the rows in my spreadsheet where columns G and H both contain the text "Yes". I've tried conditional formatting and VBA but can't seem to get either to work for what I need.
View 3 Replies View RelatedI have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
If the value of the adjacent cell in column A is blank, insert a blank row through Column B:J.
View 9 Replies View RelatedI have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
I have an excel file and what i want is to sum two different columns to a third one, however there are some important notes:
1. Column A has dates
2. Column B has numbers f.e. 25, 30, 35 etc. , which have to be added to dates of column 1 , so a new date will be created in the new column
3. Colums A and B are not next to each other.
4. Some cells of column A and column B are blank , actually columns are sth like this
A B C
5/2/2014 25
blank blank
8/5/2014 35
10/9/2014 30
blank blank
When a date value occurs in a cell of column A , then always a number will occur in column B
When a cell is blank is column A , then the respective cell of column B will also be blank
What i want is to add values of column A and B to create column C automatically ( each column has 1000 cells ) , however in case of blank cells , i want a blank cell in column C, not something like #####
Apart from this , i want in the future , when i expand column A and B , when values are entered there, i want column C to be created automatically.
I need to put an extra "spacer" cell in each row that contains either 8 or 9 blank spacer cells in columns A through H or A through I, respectively, so that everything in those rows shifts to the right by one column. The problem is that all the other rows don't need any extra spacer cells. There is no pattern to the rows that need the extra spacer cell (such as every 5th row, or something).
View 3 Replies View RelatedI'm using the the Texttocolumns method in a Macro, and when it runs across a cell without any data I get "Run time error '1004' No data was selected to parse". How would I get passed this? I would like it to just remain a blank range without the error. Here's the code I'm using:
Range("F38").Select
Selection.TextToColumns Destination:=Range("F38"), DataType:=xlFixedWidth, _
FieldInfo:= Array(Array(0, 1), Array(5, 1), Array(13, 1), Array(21, 1), Array(25, 1)), _
TrailingMinusNumbers:=True
I work with a spreadsheet every week to input values and subtotal them. These values change constantly and instead of going through and manually deleting each row in a 100+ row spreadsheet to be able to import into another program, I'm looking for an quicker way to keep my data in order but consolidate by getting rid of only the rows where both column A and B are blank.
Here's an example of what I'm working with:
5
10
15
20
50
2
4
6
8
20
This is what I need the final product to look like:
5
10
15
20
50
2
4
6
8
20
So I would like to quickly delete rows 2, 5, and 11. All of the other answers I've found only show how to delete rows based on empty cells in only 1 column. How can I quickly delete the rows where both columns are empty?
I currently have a spreadsheet that I had to convert from multiple rows to columns:
[URL]
Now I need a script to change the data so that each column is now in row format, (see attached spreadsheet).
I found this great macro to use in a spreadsheet I'm trying to transpose from rows to columns, however, I need a place holder for blank cells: [URL] .....
I was able to use the macro in the last post by Ochenden but the blank cells need to have a placeholder.
How to change the macro or come up with a different script for me to use?
Attached is how I need the spreadsheet to look.
Script I used:
Sub aaa()
Dim OutSH As Worksheet
Set OutSH = Sheets("Sheet2")
Range("A:A").AdvancedFilter Action:=xlFilterCopy, copytorange:=OutSH.Range("A1"), Unique:=xlYes
[Code] ..........
Transpose_Duplicates_Examples.xlsx
I want to write some VBA code that simulates the double click of the square in the lower right of a selected cell. When you double click it, it fills every cell in column A until the first blank in column B. I was able to find this code searching around:
Code:
Selection.AutoFill Destination:=Range("A10:A" & Range("B10" & Rows.Count).End(xlUp).Row)
Selection.Copy
The issue with the above is that it copies the data all the way down to the LAST row in column B with data.
I want to have the macro stop when it finds the FIRST blank cell in column B.
Just as an example, the last row of data in column B is 100, but in row 67 the cell is blank, so I want it to stop at row 66.
I'd like a macro that cycles down 50000 rows of column B. If it comes across a blank cell it will import the value from its adjacent cell in column A. then the macro will move onto the next cell.
View 9 Replies View RelatedI am looking for a piece of code that I can use.
Basically if cell A2 is non blank then I want cell C2 to display My Text. I want to do this for every cell down to about A250.
I have a list of parts in column A that is about 200 rows or so. There are only a dozen parts or so that repeat multiple times. I then have about 20 columns of data for each part. Column K is "Customer".
What I need to do is count the number of each part in column A. That was done with a simple countif formula. Now I need to count each part in column A only if a cumster name is listed column K (this column is left blank until a customer is added). I can't seem to get this to work. Let me know if you need me to be more specific.
I have a formula in my spreadsheet that shows dates for servicing of products. Column F show's Date Last Serviced and the adjacent column (G) then shows Date Next Service. When there is nothing on the F column's cell then the date that appears on my spreadsheet is 31/12/00. It looks messy and I would rather have a formula to make it so that if the F column is blank, then the adjacent cell in G column should stay blank also.
To automatically calculate the next service due date, I have variants of this formula that creates the dates in G column:
=DATE(YEAR(F4)+1,MONTH(F4),DAY(F4))
I tried adding as an extra part, for example:
=DATE(YEAR(F4)+1,MONTH(F4),DAY(F4))&If(F4 = 0, "", F4)
It always brings back the answer of 366, and does not make the cell blank...
I want AB1 to highlight red if date in S1 is not blank and N1 doesnt equal AA1. Is this possible?
View 1 Replies View Related