I have data that i import on a daily basis, the data can range from a couple of rows to thousands,
What I need to do using VBA is select the active cells, where cells in row ''G'' is blank then delete the entire row where that cell is.
i want to delete entire blank row from column C2:C300 i mean if i have data c2:c100 then c101:c300 delete entire blank rows
View 4 Replies View RelatedI could use some assistance in creating a macro that will delete all and only text boxes on the active sheet. Some text boxes will be empty, but I still wish for them all to be deleted. Through searching the forums I see a similiar code, but it deletes all shapes on the active sheet:
View 8 Replies View RelatedI've been working on a macro which delivers a daily report. the report is made up of 4 sections (received orders, scheduled orders, pending orders and unusual orders) each section is topped by a title which is a merge of all columns (A through I) the problem I am having is that the first column displays case numbers (to be displayed in text or number formats) and the 7th and 8th columns are dates When I try to have the VBA select the first column to format as a number, it will select all columns due to the merged cells is there a way to format only non-merged cells of a columns
This is the section I currently use for formatting but it doesn't actually work, (everything ends up in a date format)
[Code] .......
I recently found this code for selecting a whole column of non continuous cells.
ActiveSheet.Range("a1",ActiveSheet.Range("a65536").End(xlUp)).Select
How can I change the "a1" & "a65536" so it can work and be activecell instead?
So for example if I have a1, a5, and a6 selected, I want to be able to select row 1, 6, and 7 in one action. Is there a hotkey for this, and if not what macro could I use?
ActiveCell.EntireRow.Select only gives me one row. I want to be able to select all of them at once.
I've been looking for a couple of hours to try and find VBA to delete entire row if that row contains cells that are empty.
View 5 Replies View RelatedI am trying to select a group of cells in an inactive worksheet from code in a module but I keep getting a run-time error 9 message and I cant seem to find the syntax problem.
I pasted my code below and the error occurs in the last line before the end sub statement.
[Code].....
I need automatically deleting of whole row based on cell value, if value of cell which is in h:mm format, is less than or equal to 2:00 (h:mm)
So far I got.
Code:
Sub FillDownFormula()
Code:
Range("L2").Formula = "=RC[-3]-RC[-2]"
Range("L3").Select
Columns("l:l").Select
Selection.NumberFormat = "h:mm"
Dim rng As Range
[Code] .........
I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.
I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.
I have tried several methods to delete the entire row if the cell in column 'A' is blank ...
View 9 Replies View RelatedI am trying to delete/select empty cells in Column C.
I tested the code in my work sheet which has close to a million rows. this code for some reason doesnt work. its selecting empty cells from Cell C, that is not working.
When I test it on a new worksheet it worked fine. ?
As the title sugests I would like to Select a cell and a macro will highlight the row and column
Sub Select_Entire_Row()
Dim RowNo As Integer
Dim ColNo As Integer
RowNo = Selection.Row
ColNo = Selection.Column
If RowNo.Value >= 1 Then
Cells(RowNo, ColNo).EntireRow.Select ' I want it to do both not one then the other
Cells(RowNo, ColNo).EntireColumn.Select
End If
End Sub
Is it possible to select entire row while Pressing Down Arrow Key from the key board.
View 2 Replies View RelatedI plucked a macro off an old post from here (as I always do), but I'm having trouble tweaking it.
VB:
Sub completedtest()
Dim c As Range
Dim rngG As Range
For Each c In Intersect(ActiveSheet.UsedRange, Columns("i"))
[Code] ....
As it currently stands, the macro selects the entire row of rows containing the letter Y in column I. All I need to change is, I want to simply select columns B through I, rather than the entire row.
I have a workbook that uses Autofilter.
Column A has data. Column B is hidden, has no data, and is empty.
Colmn C has data, on through the rest of the sheet (to Column AB).
Why column B has no data is unimportant for now. It, however, must maintain its existance and cannot be deleted.
When I select the autofilter sort button on column A, it selects only that column, and not the rest of the sheet. Data is subsequently scrambled.
When I unhide the empty column B and select the sort button on column B, it selects the entire sheet. Data remains intact.
When I select the sort button on column C, it selects the rest of the sheet, but not column A (with data), or B (with no data). Data is subsequently scrambled.
I have code to Add a row to my Table ...
[Code] .....
Now, how do I select the entire Table row below ActiveCell?
I came across this code that selects (and extends) cells between the active cell and the next cell with data.
Is it possible to modify this so that it selects the entire Rows ?
Code:
Sub Test()
If Selection.Select "" Then
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
Else
Range(Selection, Selection.End(xlToRight)).Select
End If
End Sub
I have this problem quite often and always have to think of a way around it, however I think there must be a simple method of doing what I want.
If I want to select row three, I would write:
Rows("3:3").Select
However, if I have a variable which holds my row number how do I rewrite the above code? I've tried serveral varations of:
Rows("CurrentRow:CurrentRow").Select
I am trying to select the active row and the next 21 rows down, so in all 22 rows should be selected after the macro runs.
View 4 Replies View RelatedI've manage to do this a while ago, unffortunaly my hard drive got damaged.
View 3 Replies View RelatedI need to select the row for the active cell without using an explicit RC address. I don't seem to be able to make the syntax work.
View 2 Replies View RelatedI am trying to select a shape in a cell and place a cell reference into the shape. I know the cell address, but do not know the shape reference. (The row that the cell and shape reside came from copying the row from another sheet and inserting it into the current sheet). I can not seem to come up with the correct code to accomplish this. Right now I have:
Cells(r + 1, 48).Select
ActiveCell.Shapes.Select
ActiveShapes.Formula = "$AW:" & r + 1
Where r+1 is the row where the line finally resides after insertion and "AW" is the column to the right of the cell where the shape resides.
I have tried to put the cell reference into the shape at the location where it is copied from but the reference is not dynamic and I can not seem to get it to be. Another issue that will arise is that the rows in the new sheet will probably be sorted and I question if the cell reference will follow the shape's new location.
I want a simple macro which will go to the cell in row one in the active cell's column
View 2 Replies View RelatedUsing vba how do I tell a macro to select the row that the active cell is in?
I'm just using a basic delete Row macro but I'd like for the macro to automatically select the entire row when it's time to delete instead of me highlighting the section.
I need a macro that will select row 15 in the active column. (basically returns to the top of the data where rows 1-14 are frozen in place, only in the current column).
I have been able to accomplish the opposite (skip to specific column while maintaining active row) by using the code below:
Range("V" & (ActiveCell.Row)).Select
But it does not work when I try the reverse:
Range((ActiveCell.Column) & "15").Select
If statement, any way where I can, when I run the macro, choose active cell?
Ex.
Start macro
and it will ask for active cell,
check if active cell higher then 0
then set cell to color red
I have this atm:
Code:
Sub LookForValue()
' Declare Current as a worksheet object variable.
Dim Current As Worksheet
' Loop through all of the worksheets in the active workbook.
For Each Current In Worksheets
[Code] .........
What is the difference between the two ?
When should I use each one ?
I have the following code Range("M402").Select
This very simple code brings me to M402 everytime I click on the button.
However, I would like to stay in the same column that I am at the moment when I click the button, and go to row 402. (i.e. if I am in cell "Z56", I would like to be redirected to "Z402" when I click the button.
I have multiple excel workbooks open at the same time. I need to run a macro on one of them every 15 min but I need to return to the active window when the macro is done. How do I read what window is active then return to it when the macro is done?
Sub AutoSave()
dTime = Now + TimeValue("00:15:00")
Application .OnTime dTime, "AutoSave"
Windows("data.xlsm").Activate
Sheets("Data").Copy
Application.DisplayAlerts = False
ActiveWorkbook. SaveAs Filename:="c:excel" & Format(Time, "hhmmss"), FileFormat:=xlCSV
ActiveWorkbook.Close
Application.DisplayAlerts = True
Windows(1).ActivatePrevious
End Sub