Graph Columns Of Data On Different Tabs In Different Orders On Same Plots
Feb 4, 2014
I get large data sets that are organized in columns and each has a title at the top of it. I will get several sets of this data in order to compare them all on graphs.
Now here is the kicker, the columns are not always in the same order. Not always named the same. And not always the same number of columns.
I want to make a tool to handle this to a point where I just import the data and everything is taken care of. I also want a printable report for each data set to which I can select from a drop down menu. Populate cells on a tab, and then can be printed.
View 2 Replies
ADVERTISEMENT
Apr 17, 2014
I would like to build a graph that compares 2 sets of data but only plots 1 dot where the two intersect. I have seen this graph made by others in Excel but I do not know what it is called or how to make it. An example data set is below.
ID Age Height (cm)
1 5 125
2 7 140
3 8 138
4 11 152
I would just like to plot the location where the age and height for the ID's cross and not 4 plots with the age and 4 plots with the height.
View 1 Replies
View Related
Jan 17, 2010
I'm currently drawing rectangle shapes with transparency on top of a graph to highlight certain depth ranges in vba. Rectangles span entire graph width. Is it at all possible to draw the shapes behind the series plots?
View 7 Replies
View Related
Sep 27, 2011
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
View 2 Replies
View Related
Jan 9, 2012
I'm looking to create a graph where the data source is two columns:
Column A (From A2 down to last but one populated cell)
Column ? (Last populated column on the right, from ?2 down to last but one populated cell.
all I have at the moment is the generic code for creating a graph (which I reverse engineered from a macro I recorded).
Code:
Charts.Add
ActiveChart.ChartType = xlColumnClustered
ActiveChart.SetSourceData Source:=Sheets("1_bth_x_wk").Range("A1:H40"), _
PlotBy:=xlColumns
ActiveChart.Location Where:=xlLocationAsObject, Name:="1_bth_x_wk"
View 9 Replies
View Related
Jul 24, 2007
i have data that has several bits of information for each different account number.
is there a way of writing a macro to transfer the information from the main sheet onto different sheets automatically titled for each of the different account numbers?
ie. Account Cost
E1 £100
E1 £200
E2
E2
etc
i want different sheets for the info next to each of the account numbers
View 9 Replies
View Related
Nov 18, 2013
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
View 6 Replies
View Related
May 31, 2007
What I am looking for is a macro/formula that will look at a unit number, then the type of work done, then the completion date and decide if the same type of work was done on the same unit within a 7 day span of time.
Example
Unit is 11111, work is plumbing completion date is 10/4/07
Unit is 11111, work is plumbing completion date is 10/7/07
This means the work has been done 2 times (obviously showing that it did not get fixed the first time)
Is there any way to mark an X in the square with the formula, or any type of identifier what-so-ever
I have attached a spreadsheet and hope it helps
Again I know this is complex so it is OK if no one feels like messing with it but I wanted to check here first.
View 3 Replies
View Related
Jun 13, 2006
I am trying to make a line plot for traffic data. I want to make 37 different line plots with two series (count 1, count 2) and 72 values and the name of the trafficlight. I attached a text file with data for one of the 37 trafficlights. In my datafile, below the first 72 values the values for the next plot are written. I can make this tables by hand, but I prefer a macro because I want to repeat the exercise for different datafiles.
View 5 Replies
View Related
Feb 8, 2014
I would like to use multiple scatter plots and bar charts in one chart. Problem is that X-Axis goes horribly wrong every time, even if I have same points on both scatter and bar. Here is Data for 2 Scatter Plots
XScatter1
1,43 0,14
2,60 0,25
3,04 0,37
3,60 0,50
3,93 0,60
4,69 0,80
X Scatter2
5,10 0,92
5,36 1,00
6,43 1,26
7,60 1,53
8,19 1,65
8,79 1,77
9,69 1,93
And here is data for 2 Bar Charts
XBar Chart1Bar Chart2
1,43#N/A 0,00
2,60#N/A 0,01
3,040,01 0,01
3,60#N/A 0,01
3,93#N/A 0,01
4,69#N/A 0,00
5,100,02 0,01
5,36#N/A 0,01
6,43#N/A 0,02
7,600,04 0,02
8,19#N/A 0,01
8,790,11 0,02
9,69#N/A 0,01
I start with Scatterplot and put those in the graph, then I add other data and change it to Bar Chart, but this is the point where X-Axis gets mixed up and scatter plot X data and Bar chart X data are not matching.
View 5 Replies
View Related
Nov 28, 2012
I have a workbook that has a 50 years worth of daily values for ~30 data streams. Each data stream is a tab, days are in rows with each year a new column. I want to plot selected date ranges of selected data streams from selected years on one page. So I have a tab, "QuickCharts" that has a spinner to change the year and based on that change it pulls in two dozen different data streams (reservoir information, so we're talking Inflow, Outflow, Stage, Temperature, etc at different sites). I have static plot of the entire year's data for each site. This much works fine.
I want to be able to dynamically change the plot ranges, though, with spinners. I created 12 named ranges using this type of syntax:
Code:
=OFFSET(QuickCharts!$Y$3:$AP$367,PlotStart,9,PlotStart+PlotOffset,1)
where PlotStart and PlotOffset are named cells containing a single value.
Things that work:
- I can perform operations on the named range (e.g. =Average(PR_XAxis) works fine)
- I can go to the named range dropdown in the upper left and type the range names in, and the range is selected as expected.
- The named ranges are offered as autocomplete options when typing in cell formulas.
Things that don't work:
- These named ranges don't appear in the named range dropdown list at the top left - I can type them in, but they aren't there by themselves.
- I cannot use those named ranges as series for a chart.
I tried replacing PlotStart PlotOffset with the absoilute cell references. That didn't work.
I tried scoping to worksheet instead of workbook - didn't work.
This seems to be related to this question, but the solution there isn't working for me. Selecting Chart Data Sources Using Named Ranges...
View 6 Replies
View Related
May 10, 2008
I would like to find the intersection points of all of the linesshown on the included chart. If that could be output into a table, by the day, that would be ultimately what I am after. http://bladeseri.50megs.com/Intersects.png. Guess 50megs.com doesn't allow this type of reference. Here is Geocities link http://www.geocities.com/bladex2007/Intersects.png
View 5 Replies
View Related
May 7, 2012
I have multiple columns with data and I want to represent them in a bar graph. The problem is that for some of them I want to represent the sum something like:
Columns A and B sum and represent (I don't want to make another column, C, with the sum, the sum of the two columns should be done by the graph).
View 1 Replies
View Related
Mar 31, 2014
See attached spreadsheet. It's an imaginery list of orders. Raw data on the left, summary on the right.
F is a reduced list of A, G is how many times each appears in A. H is supposed to be the total values of each order, ie quantity in B * value in C.
How do I calculate H?
View 2 Replies
View Related
Apr 2, 2013
I currently have two tabs. Tab A (Error Report) spit out a bunch of records that I need to find in the raw data/remove them. The value in column C in Tab A refers to Column A in Tab B (Data), and Column D in Tab A matches with Column N in Tab B, and Column E in tab A refers to Column C in tab B.
I want to know how I can find the records that match those 3 columns in the First Error Report Tab as I need to find those records and delete them as they are, as you can see, errors!
View 1 Replies
View Related
Feb 11, 2014
What I need to do is work out the cost of call 1, to work out the call cost you will times the duration by the cost of the call on the charging codes tab. So if E2 = uk Mobile 02 (fm1) then search for a match in charging codes tab column B then get the cost from column C and times that by the duration on CDRS test tab column D
the cost amount needs to be in column I
a different explanation below..
if CELL e2 matches a column in charging codes tab column B then get the amount of cost from charging codes tab column C and times it by cdrs tab CELL d2 and return the result in CELL I2
View 9 Replies
View Related
Jul 9, 2009
How To align (set tabs or columns) on a text string ....
View 8 Replies
View Related
Jan 9, 2009
How would I reorder columns & tabs based on a form where the user can put them into order that they would like the columns? I forsee some type of form where the user can dsignate the order and then start a macro that will sort both the columns and tabs.
View 5 Replies
View Related
Oct 30, 2008
I am trying to set up a grid to count the number of orders each rep writes for each month of the year. I have tried three different formulas without success.
=COUNTIFS('Daily Compliance'!$B:$B,$C$7,'Daily Compliance'!$O:$O,">39447")-J7
In which J7 would count all orders written past Jan 31, minus K7, etc.
I also tried:
=COUNTIFS('Daily Compliance'!$B:$B,$C$7,'Daily Compliance'!$O:$O,">39447",'Daily Compliance'!$O:$O,"<39479"))
and:
=SUMPRODUCT(--('Daily Compliance'!O:O>=E274),--('Daily Compliance'!O:O<=F274),COUNTIF('Daily Compliance'!B:B,C7))
Daily Compliance is the sheet that lists all the orders, with column "B" being the rep, and column "O" being the date.
At this point, I'm not sure what I'm doing wrong.
View 9 Replies
View Related
Apr 10, 2008
I need a macro that looks at the earlier orders first and assigns inventory to them. Keep assigning inventory until either there are no more orders, or the inventory is depleted. I have tried to figure this out using formulas but it never seems to work out correctly. Here is a little sample I made to show what I am trying to do.
Item# Date Quantity Order Quantity Committed
Item# Quantity in Inventory 1 1/1/2008 18
1 21 2 1/5/2008 23
2 300 3 1/10/2008 10
View 13 Replies
View Related
Apr 7, 2007
I have been trying to create a macro button on my new orders page for my spreadsheet.
What I am hoping to achieve is a marco that when I click place it, it will take the information needed from the new orders page and paste it into the existing orders, but it does not end there the tricky bit im finding is how to get it to go to my stock spreadsheet and whatever part was ordered it would lower the stock by the quantity that was ordered so in effect the spreadsheet would lower my stock level as a items were purchased. I have attached the spreadsheet for you all to have a look at. I only have very basic VB skill but eager to learn. If anyone can solve this for me I defiantly owe them a pint
View 3 Replies
View Related
Feb 10, 2009
There will be many orders in this list and each orders will have several appendixes. I want to able to see and print the orders with their first appendix row but I want to do that when I need.
and do not want to loose any data.
View 4 Replies
View Related
Mar 16, 2009
I am trying to count how many orders have Part numbers A and B on the same order. If order 123 has part number A and B on it then return true or else false. I think Match and array might be a way to go but I am still not able to come up with the result.
Here's how the Data looks like:
OrderPart numbers
123A
123B
123C
123D
234A
234B
234E
346A
346C
Answer for above would be 2 orders that have A and B part numbers on the same order.
View 12 Replies
View Related
Sep 11, 2009
I need to count the amount of work orders that my employees have completed.
Review example.
How many work orders did chuck complete? (Column D)
How many work orders did brian complete?
View 2 Replies
View Related
Aug 13, 2012
I work for a manufacturing plant where we manufacture one product which is then sold under different names.
The product is made from the same material.
I am looking for a way to match up production to the orders and then subtract the produced quantity from the orders.
Tab 1 - Orders: Column 1 has the items (A1, A2 and A3 are all produced from A), Column 2 has the date when the order has to ship and Column 3 has the ordered volume.
Tab 2 - Production: Column 1 has the raw material, Column 2 has the production date and Column 3 has the amount manufactured.
Tab -1: Orders
Item
Ship Date
Ordered Qty, KG
A-1
8/22/2012
16
[Code] ..........
Tab -2: Production
Item
Production Date
Quantity
A
8/13/2012
140
[Code] ........
View 4 Replies
View Related
Jan 20, 2004
Columns F looks at another table within the same worksheet for the Customer Code that has the MOST Orders in Column B.....then places the Tot Orders amount in F2..... Cust Codes in Column E and the Cum Values into Col G ( that's already been accumulated and housed in column C ).
Cell F3 then go looks up the next largest order in Column B and pulls over the adjacent Customer Code & Cum Value to the E,F,G table again.
Basically there's 3 functions:
1 in E2
1 in F2
1 in G2
All to copy downward within that table
******** ******************** ************************************************************************>Microsoft Excel - Book4___Running: xl2000 : OS = Windows Windows 2000 (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=
ABCDEFG1CustomerTot*OrdersCum*Value.CustomerTot*OrdersCum*Value2Cust*682$943.Cust*682$9433Cust*973$787.Cust*973$7874Cust*1055$525.Cust*1055$5255Cust*840$438.Cust*840$4386Cust*125$150.Cust*125$1507Cust*27$300....8Cust*55$180....9Cust*43$75....10Cust*31$25....11Cust*71$12....Sheet1*
[HtmlMaker 2.32] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
View 9 Replies
View Related
Sep 22, 2012
I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
View 3 Replies
View Related
Oct 12, 2009
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies
View Related
Apr 20, 2013
I have a table that includes list of clients, products they order, and requested delivery date. When the client calls in to place an order, I pull up the excel table (orders worksheet) and fill in the items quantities and the required delivery date for the client who called. Once I fill the information for the client who called in, I need to update a "log" worksheet with the information that I just entered. The log worksheet will eventually contains history of all the orders which I received in the past.
View 1 Replies
View Related
Jun 30, 2009
look at the attached. I trying to identify any jobs that are in sheet1 but not in the current orders tab.
View 3 Replies
View Related
