Finding Data That Has 2 Work Orders And Comparing With Completion Date
May 31, 2007
What I am looking for is a macro/formula that will look at a unit number, then the type of work done, then the completion date and decide if the same type of work was done on the same unit within a 7 day span of time.
Example
Unit is 11111, work is plumbing completion date is 10/4/07
Unit is 11111, work is plumbing completion date is 10/7/07
This means the work has been done 2 times (obviously showing that it did not get fixed the first time)
Is there any way to mark an X in the square with the formula, or any type of identifier what-so-ever
I have attached a spreadsheet and hope it helps
Again I know this is complex so it is OK if no one feels like messing with it but I wanted to check here first.
I am trying to count how many work orders we have created from 3 months (90 days) ago. In an effort to make the input work minimal. I wanted to use the =Today() formula and then subtract 3 months.
So I currently have =Today() in A1 and then (A1-90) in cell B1 and I get the date I want.
However, When I use a countifs formula and my criteria is
Her situation is that she would like to be able to tally all the work orders that are created and either completed or pending. According to what she tells me she usually spends hours tallying the monthly worked on orders manually....
Using Microsoft Access to pull from a database work orders. Some of those are what we call "dummy" work orders and have a letter in them, real work orders are signified by a 10 digit number. I would like to sort and eliminate the letters to find appropriate data. I am assuming I will need to copy into excel and do some sort of formatting but not sure where to start.
The intent is to calculate the completion date against the assigned date as follows:
G13 - Typically the assign date but sometimes can be blank because someone forgets or doesn't bother to insert
For this example, let's say: 12/17/12
H13 - Completion date
For this example, let's say: 12/20/12
I'm expecting a result of '3' for 3 days
The first half of the function is intended to calculate 1 day if G13 is blank or not defined. However, when I have dates in both cells, I'm getting a "false" answer instead of a numerical value that I'm expecting.
In our workplace, we do work weekends & sometimes 7 days a week.
I have project start date in cell C2((MMDDYYYY format).In cell D2 I have put the total days needed to complete the project.In cell E2:E6 I have got the scheduled Holidays.
I need to calculate the project completion date in F2.We work from Monday to Saturday,Sunday being off day.
I have a spreadsheet where I have input all of my technicians service calls and installations.
In Column C Row 5 and up to the max I assume because I'm not sure how many rows I would use in a year, I have an estimated completion date.
In Column D and the same Rows as above I will input the Actual Completion date.
What I want is if the current date is past the estimated completion date (Column C) and there is no date entered in the Actual Completion date (Column D) I would like a MsgBox to pop up saying "Please enter a new completion date on row _"
"_" would be which ever row the estimated completion date has expired without an actual completion date being entered.
I have a spreadsheet containing 2 worksheets. First worksheet has my Students Details and the second spreadsheet has their Campus Locations.
What I need to create is a Formula that tells me "What CAMPUS was the student LOCATED at on the Course Completion Date?"
[URL]
what I'm trying to do is as follows:
John Completes his Course on the 25th July 2013, his Student ID is 450.
I need to go to the CAMPUS LOCATION spreadsheet and first search for Johns student ID (450) in column B. Because John is listed in B2,B3 and B4 excel needs to check date in Column E to see if his completion date was before the Date he started at Campus.
If it is then the Campus he was at will be the value of Column D on that line.
If it is not then it needs to search the next line until it satisfies the condition.
I am using a formula for weeknumbers and formatting cells based on their values but have just realised it will not work at year end.
The formula in D2 is as follows: =IF($C2<$O2,"green","blank")
C2 is the weeknumber of an incident based on the actual date in B2 (e.g. 01/06/2014) and uses the formula: =WEEKNUM(B2). O2 is the weeknumber of the current day and uses the formula: =WEEKNUM(NOW()).
So cell D2 states "green" if the incident happened over a week ago, and states "blank" if the incident happened in the current week.
If I used this at year end when the incident weeknumber may be 52 and the current weeknumber may be 1 - the formula would not work as it would state "blank" rather than "green", even though the incident happened over a week ago.
How can I get the year encorporated within the weeknumber?
I have two different lists of names. One is about 3000 names long and the other has about 3500 names. I want to identify the 500 people that are not in the first list that are in the second. If there anyway to do this? I was going to put them in A-Z order and then go through and using an IF(A=B,"yes","no") and go through and insert new cell when ever it says no till it says yes BUT the functions start messing up when I insert a new row and it's taking way too long.
I get large data sets that are organized in columns and each has a title at the top of it. I will get several sets of this data in order to compare them all on graphs.
Now here is the kicker, the columns are not always in the same order. Not always named the same. And not always the same number of columns.
I want to make a tool to handle this to a point where I just import the data and everything is taken care of. I also want a printable report for each data set to which I can select from a drop down menu. Populate cells on a tab, and then can be printed.
I'm working on the final stage of a project. I'm attempting to write code that will set off a chain of events if two dates are 91+ days apart from each other . I've attached a sample worksheet that shows the bare bones basics of what I'm attempting to do.
What will be the most efficient and effective way of accomplishing my goal: userform, functions, formatting, etc.? T
I need to VBA code that will loop through the active sheet for all rows, column C2 through however many rows there are. Col C contains a date in the format: mm/dd/yyyy. I need the VBA to compare this date to today's date+30 days and if the date in C2, etc. is greater than today's date + 30 days, shade the row a particular background color (e.g., 3).
take a look at the attached example and let me know how to make the formula work?
For each "title" in column A, I want to compare the two sets of start and end dates (columns B & C versus D & E) and if the date range in column B &C overlaps with the date range in column D & E, input "yes" or "no" in column F.
In my attached example, rows 8,9,11, and 12 would be populated with a "yes", the rest would be "no".
I'm trying to write a macro that compares 2 coloms(open,close) of dates/times and calculates how long each was open for. This is what I have so far. I've also include as an attachment an example of the date/time format i'm using.
Sub Time() Dim A, B, C As Long
Sheets("Sheet1").Select
For i = 7 To 5000 A = Fix( Range("A" & i).Value) B = Fix(Range("B" & i).Value) C = A - B Cells(C, i).Value = C
I need to set a format in which if I enter a num eg 15 on the Jan Column, format comes as "15-Jan" format or If i type 20 on the march column , it comes as "20-Mar" format
I would need it in Date format, because I would be comparing dates later on.
I need a VBA code which tells me the date of previous monday of any date. The user types in any date to the cell A1, and I need the date of previous monday to be inserted to the cell A2.
i ran some tests and it was working good only doing folders with ~100 files. i tried running the macro on all the files (~70,000), but I ran into problems with the computer going into standby while I was away. I tried running a batch of 3000 files and it completed, but only got up to around ~400 out of ~3000 records. Maybe, it stops cause of code related inefficiencies?
The macro is designed to grab a closing stock price for a date specified for a list of Symbols in column A and the date in column B. The closing price is then displayed in column D.
The problems (there are two that I found) I am running into is that when the Macro encounters a symbol in Column A and is not recognized, an error message pops up and the macro stops altogether. I want the macro to continue to run down the list but I can't figure out where in the macro it is stopping and, more importantly, how to make it continue. I have attached a copy of file if needed (if opened, you can see it stops working after row 11).
I have 2 command buttons on a sheet, one of which I would like to upgrade to delete the other, as well as itself, upon completing the rest of its functions. That's right, normal VBA isn't fun enough anymore, I want kamikaze suicidal code that wipes itself off the face of the earth.
My colleagues are... less than comfortable with VBA. I use it to produce some of the forms which I send to them, and if I could delete the code automatically after running, I'd save myself some time and/or save them some confusion.
I'm getting a "Subscript out of Range" error on a routine that was running fine a few days ago. It's part of a larger macro, so I've pasted the full code for that macro below. The problem is in the routine labled "Replace Regional Labels". What that's supposed to do (and DOES do) is to replace labels such as 110 or 11000-CSD with 11000. The error message comes up AFTER the routine has completed it's work. The offending line is:
I need to list multiple items that end in, example:at time entered there is 45:14:50 = Hr:Mn:Sec to completion, and would like the date and time of completion or just a countdown to 0 would work. I will have 60 to 70 items running at the same time with different start times and lengths. Picture queueing up items at different times to complete in different length of time and I need to be ready when each item is done. I know this is an Excel forum but I also use Apple Numbers so if either one works better I'm fine with that.
In the attached file, column R is the start time that I enter that needs to be calculated to column S. When I enter an item that takes 54hrs 23min 45seconds to complete, what date and time will it be ready.
This is my first time posting to the site so I will start with a simple question. I have an email macro that will send the workbook to a specific recipient. What I want it to be able to do is close excel after the macro is ran and the email is sent. If anyone would be kind enought to supply me with a code that will work .....
I have two sheets, one sheet showing the total calories burned, in the sheet two, i have the target set,
How can i change the color of cell in the target on the basis of the achivement for example the target is say 10,000 cells and after I achieve 1500, it will change the color, after 3000 it will change another color and so on and so forth.
I need to create a tracking sheet for my vacation. The vacation starts to accrue here after a 90 day probation following the hire date. Each individual is allowed 40 hrs/year. I also need to see the hours accrued, the hours used & the balance. Everyone's balance renews on their anniversary. I will fill in the blanks for the names in one column & the hire date in the next column and I would like formulas for the following columns.
Each row of the spreadsheet from a6:a25 is the planned production of one cellbuilder.
From this sheet I need to produce a work schedule of tasks to be performed by date.
Detailing, batch, cellbuilder number,weather 1st or 2nd graft etc, and the date available (for picking) I would like the option to choose a daily or weekly schedule.
Is this possible ? and how would I even start to go about it. I just can't visualise how to do it.
