I have an excel sheet which has been exported from an 'Employee Attendance Software',
http://www.flickr.com/photos/34247990@N06/4299288997/
In the above screenshot, The employee name highlighted in Yellow should feauture in column A in the cells highlighted in Yellow.
Similarly, there are some other employees in the list for whom I have to populate the data in a similar fashion
http://www.flickr.com/photos/34247990@N06/4299288959/
I am trying to solve a problem with = LOOKUP. Here's the data. A1 can have a value between 1-100.
IF A1 IS <80.00, NO MULTIPLICATION IS NEEDED
IF AI IS 80.01 TO 85.00, MULTIPLY A2 BY 0.37%
IF AI IS 85.01 TO 90.00, MULTIPLY A2 BY 0.52%
IF AI IS 95.01 TO 95.00, MULTIPLY A2 BY 0.87%
IF AI IS 95.01 TO 100.00, MULTIPLY A2 BY 1.07%
Is there a =LOOKUP formula that can be used here?
I would like to have the answer to a formula, say in cell G6, to show up in say G5. I notice in my college coarses, doing our homework through excel, the solutions are always in a cell around the entry cell.
View 9 Replies View RelatedI would like to a formula that will provide a weighted average rate (yellow cells) for a provided volume level, given the tiers on the left. I have already performed this the "dumb" way with lots of IF statements to figure the volume by tier and then taking a weighted average of the products with the rates by tier, but there's got to be a more efficient way. My file is huge! ....
View 9 Replies View RelatedMy sheet called 'Report' finds a type using a vlookup. I then have a sheet called labor, where I want to find put the total amount for labor using this formula: '=SUMIF(Report!$K$2:$K$65000;LABOUR;Report!$G$2:$G$65000)', but it only returns a '-'. I want the formula to return total amount from column G, if column K is type 'LABOUR'. Is my formula incorrect?
View 2 Replies View RelatedI have the following letters in cells
D2= A
D3=G
D4 =L
These represent Accomodation,Groceries, and Liquor.
Starting at E12 I want a formula , to drag down the column, which will show either Accomodation, Groceries or Liquor depending on the letter I put in cell D12,
Eventually I will possibly need help to summarise these costs on another sheet with other data such as fuel costs and fuel analysis but this will get me started.
I've am array formula that I use to provide highest values:
Code:
{=INDEX(Data!$D$2:$D$128, MIN(IF(LARGE(Data!$D$2:$D$128,ROW(A1))
=Data!$D$2:$D$128, ROW(Data!$D$2:$D$128)-MIN(ROW(Data!$D$2:$D$128))+1)),
MATCH(LARGE(Data!$D$2:$D$128,ROW(A1)), INDEX(Data!$D$2:$D$128,
MIN(IF(LARGE(Data!$D$2:$D$128,ROW(A1))=Data!$D$2:$D$128, ROW(Data!$D$2:$D$128)-
MIN(ROW(Data!$D$2:$D$128))+1)), , 1), 0), 1)}
I want to replace the range Data!$D$2:$D$128 with a dynamic reference: like that one:
Code:
ADDRESS(MATCH(Summary!$B$1,Data!$Q$2:$Q$10000,0)+1,
MATCH(Summary!$B$7,Data!1:1,0),1,1,"Data")&":"&ADDRESS(
MATCH(Summary!$B$1,Data!$Q$2:$Q$10000,0)+COUNTIF(Data!$Q$2:$Q$10000,Summary!$B$1),
MATCH(Summary!$B$7,Data!1:1,0),1,1,"Data")
The two formulas work well in separate sheets but crash when put together, how could I possibly insert the second address formula into the first one?
=IF(AC4509="","",IF(W4509=1,ROUND(AR5+(0*(9.693/C4509)),1),ROUND(AR5+(X4509*(9.693/C4509)),1)))
If the value of W4509 is equal to 1, the solution would be whatever is dictated, otherwise, it uses the alternative formula to achieve the answer.
My question: I want to be able to take the solution to the formula and "fit it" into another formula.
Example: ((the "If W4509=1" formula)-88)*(C4509*.09693)+100-0) and ((2nd formula)-88)*(C4509*.09693)+100-X4509)
Is it possible to have a formula that will return the answer as the value.
For example if I have 15.75 in A1 and I use the formula =ROUND(A1,0), the solution is 16, but when you click on the cell it shows the formula and not the value.
I know about Paste Special, but was wondering if anything could be added to the formula to provide the solution.
Would this require a macro?
my questions below are more oriented to hows & whys, as opposed to asking for a fast solution to a pressing problem.
I'm just reviewing the basics of SumProduct to be sure that I understand what I'm really doing when I deploy the function. So, I have the following formula:
I'm looking for a VBA solution that will return a list of unqiue job numbers in B by date, the below is some sample data in Sheet 1
Sheet 2 is the result I'm looking for and usually there will be muliple job mumbers for the same date and in this case I'm fine to leave it as a blank cell in sheet 2 for that day.
Unable to use advanved filtering as it's a data table thats changing all the time. It's verly likely that the same job numbers will be in multiple days....
I'm looking for a VBA solution that will look at the machine name above in blue and insert in in column E
Machine 2's expected results have been filled in....
I have the new version of excel and I can't figure the correct formula to do the following.
Attached is my example.
A1 is available Inventory qty. C1:H1 are forcast qty's. I would like to have the available forcast qty. shown in black and the unavailable forcast qty. shown in red based on available inventory shown in A1
Example
So C1,D1 and E1 would be Black and F1 and G1 would be red. As inventory changes so would the colored numbers on the forcast.
I am using HLOOKUP to show a date depending on the month shown in B10.
If B10 is January then the dates throughout January ie. 01/01/08 to 31/01/08 are shown in the cell range of F13 to F43. There is no problem with this unless there are 30 or 29 days etc in a month. So if November is in B10, in F43 I have the value of 00/01/1900. Can I modify my formula so if there is no data in the lookup table to return a blank value ie. "".
Here is my formula:
=HLOOKUP($B$10,DATES!$B$1:$M$32,2,FALSE)
I obviously change the 2 to 3, 3 to 4 as I copy the formula down the table.
I am currently using a macro which highlights keywords and associated page views from an array in my website stats spreadsheet. Now I need to take it to the next level:
I want to use a multi-dimensional array to pull out any keywords that are duplicated, and display them at the top of my spreadsheet with the totaled page views next to them in a different color (red).
Here is my existing Keyword highlighting
Sub Highlight_Keywords()
Dim vntWords As Variant
Dim lngIndex As Long
Dim rngFind As Range
Dim strFirstAddress As String
Dim lngPos As Long
My problem is that long text for the cell overlaps any blank cells to the right. I have more then 20.000 rows, so I would not like to put a space character in all the blank cells. Is there a way of formatting which will stop this? I don't want these texts to overlap the blank cells!
View 3 Replies View RelatedI have the attached table. I need to format with conditional formatting with the following criteria:
1) If >= 80% , then flag as green
2) If >=1% but <80%, then flag as yellow
3) If 0%, then flag as red.
I did the formatting in conditional formatting but the it did not results in the desired solution.
use of SUMPRODUCT and what I believe is called a double unary operator (--). Here's the original post with Paul's solution:
http://www.excelforum.com/excel-gene...-new-post.html
I've since discovered that a previously unknown column of data (I'm transcribing data from paper documents) needs to be included in the calculations. Specifically, the new column of data (shown in yellow in the attached example) has to be taken into consideration when counting product quantities. An explanatory pseudo code statement, also appearing in yellow in the example sheet, describes.
I need to determine federal tax withholding from gross pay.
If gross amount (for S-0 = single no dependents) is
Over.................But NOT Over............Then Subtract.........And multiply
$0.00...............$195.00.....................$5 1.......................10%
$195.00............$645.00.....................$99 .......................15%
$645.00............$1,482.00..................$351 ......................20%
$1,482.00..........$3,131.00..................$447 ......................25%
$3,131.00..........$6,763.00..................$849 .....................30%
If gross is $400 then what are the total taxes taken out? Could someone please provide a formula?
I tried this one: =IF(M10
I have two columns of adjacent data Call them A & B (although this could differ)
If the data in the second colum is not equal to, blank cell or contains the words "CAT", "DOG" or "ELEPHANT" then the content of the cell in the second column should REPLACE the content of the adjacent cell in column A (in this example) leaving B blank, otherwise column B remains unchanged.
Is there a way to test out a formula using Excel that has more than 2 variables? (If only 2 variables, I would use a simple data table). The formula I am testing has 50X50X20 variables (and as a subset, each variable has 2500 lines of assumptions!). I don't need to see all the results, only the result that produces the highest result. For simplicity (if someone has an answer) let's assume 3 variables are A1, A2 and A3. Formula is in A4 and formula is A1+A2+A3. Assuming A1 can be 1 to 5 and A2 same , A3 same, the long hand calc is for me to run a data table using variables in A1 and A2 the fixing A3 (as 1)..note maximum result....then run data table again using variables in A1 and A2 and changing fixed value in A3 to the number 2...and so on and so on....in this simple example I know the max result would be 15, but much more difficult in my spreadsheet test.
I've got a workbook in which there're many formulas linking to other workbooks. Coz these other workbooks are frequently updated, so the calculation (update) in my workbook is painfully slow and time consuming. I wanna improve this, maybe by VBA or other way instead of using link like this. Anyone can give me some hints or way how to improve this condition???
View 7 Replies View RelatedUSING EXCEL 2010
I am looking for a formula that will provide the right most value in a row.
Suppose I have a file with many rows of data, some cells are colored (flagged with an error), in several columns C, D, E, F, & G. Not all cells are colored in each row. However I would like to add a column at the end that captures a count if a cell in the row is colored.
Referring to the attached example... I would expect a value of 1 in G3, 1 in H4, 1 in F6, 1 in H7, 1 in D8 and E8.
I know there are better ways of doing this but I am working with an existing form and I need it to look the same.
Column O on Sheet1 has a link that use to open a document, now all the information is on Sheet2. On Sheet2 I have a macro that hides every Project except for the Project Number the user selects in B4 of Sheet2.
Can I create a link that will:
1) Select Sheet2
2) Enter the Project Number from Sheet1, current Row, column D to Sheet2 cell B4
I know a link can select a worksheet so I have #1 covered but I am stuck from there.
how to put together a function that will provide for me 1 of 3 results, (0, 1 or 2). Example Attached.
What I would like to do is have a function to have the results for the "Pts" (D) Column be either 0, 1 or 2 based on the following.
PM (D)<1.84 (F:10) = 2
PM (D)<2.25 (E:10), >1.84 (F:10) = 1
PM (D)>2.25 (E:10) = 0
I have two data points a Talk Time Value lets say 2:08 and the number of calls lets say 10 and need to pull the column heading value for the number of agents needed lets say 2. My "Grid" is saved in one sheet and the my variable data values are in another. I need to somehow pull the closet match of my talk time value 2:08 and the calls value 10 to match up on my grid and give me the Column Heading which is the number of agents. Which in this example would be 2 agents. Just for reference in my other sheet I have my Talk time Value in C3 and my Call number value in D3. I tried various Index and Match formulas but have not got the one that I need to work the closet I have is =INDEX(Sheet2'B1:D1,MATCH(D3,INDEX(Sheet2'B2:D7,MATCH(C3,'Sheet2'A2:A7,1),0))).
example: in Sheet 2
ColA Col B Col C Col D Sheet 1 C3= 2:08 D3=10
Row 1 1 2 3
Row 2 1:00 0 3 4
Row 3 1:15 1 5 6
Row 4 1:30 2 7 8
Row 5 1:45 3 9 10
Row 6 2:00 4 10 11
Row 7 2:15 5 12 13
I like to use the combo box (Active X control). where I need to provide the range/List in the properties. While inputing the value in properties it is disappeared.
View 1 Replies View RelatedI'm fairly new to excel and trying to create a simple spreadsheet to provide a log of staff allocation. I've created a first a sheet displaying a table with a week of rota. The first column lists where the staff are placed, the first row the date and inbetween the staff member covering that date. There are 5 further sheets, one for each member of staff with a simple table - first column is date, second is allocation.
Back on the first sheet below the timetable is a further grid showing on the first column staff names, and below each date a formula =VLOOKUP( B$3,David!$A:$Z,2,FALSE) pulls information from the 5 sheets displying whether a memeber of staff is on leave or there allocation on that particular day.
The problem i'm having is trying to get the 5 simple staff sheet to pull data from the Rota ie. I need say B3 to look at the date in A3, find the same date on the Rota sheet, look for the relevent staff name below it (if present), and display the allocation from the first column on the same row as the staff member.
I've tried a combination of Vlookup with Match and Index with Match but nothing seem to work.
Is there any Software / Excel Add-in to provide VBA Project Documentation? I'm looking for something that can tell me which code does what? Which codes and functions are related. What are the references (with Other MS Office products / foreign-objects if any). How many codes and code names
View 8 Replies View Related
