I'm using the With ActiveSheet.MailEnvelope command in vb to send an email and it works fine, but the range I am selecting includes macro buttons on the sheet.
It is possible to prevent macro buttons from been printed by selecting Format Control > Properties on the button and unticking Print Object (off by default anyway).
Is there any equivalent way of preventing macro buttons from appearing in emails when a range is emailed rather than printed.
I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.
Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.
While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.
IMAGE1.jpg ... This list uses rows up to 1040. What I am needing to do is create a master button similar to the "Show All" Button at the top that hides any sub group automatically based on the values in the yellow box. The hide button to the right of the hardware assembly will hide the rows when pressed but that requires me to go down the list and press each button that the yellow box has a zero in. I would like to create a button that has a macro that will automatically "click" or run the hide button when its corresponding yellow box has a zero in it. If the value is greater than zero it does not need to hide that hardware group.
Example from attached image. If I were to run the new macro it would run the hide button for rows 5-8, not run the macro for rows 10-13, then again run the macro for rows 15-18, and so on until it reaches the last yellow box which is row 1036 (hide rows 1035-1039).
I am trying write one to search a range of cells and attach all files located in those cells to an email. I can get most of the code to work, but am having difficult getting it to search through specific cells.
I have a button (A) that will unhide worksheet A. I would like to add another button (B) that will hide(very hidden) worksheet A (if allready open) then open worksheet B, vice versa when click button A.
Code: Sub ShowSheets() With Worksheets("A") .Visible = xlSheetVisible .Activate .Range("A1").Select End With End Sub
I'm trying to disable the [x] in the upper right hand corner to force my users to use my "Close Workbook" button, but not sure how to do it. Then, was thinking that I might just want to hide the entire Application Title bar...
I am using several toggle buttons to hide/show rows of data related to the specific toggle buttons. I also want to hide and show the toggle buttons as well. When I try to do that the data underneath the toggle buttons is hidden but the toggle buttons don't hide with the cells.
A solution for the problem that I am having would be to have the ability to click on a cell as if it were a toggle button and hide/show rows of data when clicked.
OR
If there is a way to hide/show buttons as well would work too.
1: Is their anyway I can get rid of the File, Edit, View, etc buttons at the top of the document so everyone that opens it can not see them? and also the save button, the idea is they have to use the button to save the sheet.
2: I have a button on the sheet with a macro that saves the sheet once it has been worked on, the sheet flashes when this button is clicked is there any way I can stop the sheet flashing ?
The code as it stands allows me to push a button and it immediately picks up on a meeting category and date of meeting, then sends emails to those that are supposed to attend based on a date that is within 7 days from the current date of pressing that button. HOWEVER; it seems to still send the email when the date has passed...is there a line I can put in this code to make it so that every date that has already passed will be discounted from future emails?
I have been using Excel for some time now but just started working back with the Macros! Finally figured out that you had to turn on the Designer tab to get to some of the functionality of the macros. I haven’t been able to find ANYTHING ANYWHERE to tell me how to create buttons or Icons in the 07 Excel!
adding custom 16 x 16 buttons to toolbars, which weren't preset images or using the built in deisgner.
Was hoping there may be an add-in giving more variety of buttons or a way to import set images. Very frustrating as there are many microsoft 16x16 bmps / icons that would be ideal but the choice is extremely limited.
I can't write macros, so have to create them by actually recording the process. I did that just now and then copied it into the Command button. When I run it from Tools>Macros, it works, but when I run it using the Command button it fails.
I'm trying to copy and paste values current MTD figures (P18:P39) to previous MTD area (W18:W39), but the command button fails at this selection. Cells 28-35 are blank, but I don't think this makes any difference, as I've tried the command button with those cells zeroed out.
This is what I recorded initially; this works from Tools>Macros
Sub Macro1() ' ' Macro1 Macro ' Macro recorded 04/01/2008 by Lucertola ' ' Sheets("Reconciliation").Select Range("P18:P39").Select Selection.Copy Range("W18").Select.....................
I want to put navigation buttons on each of the twelve spreadsheets, in one workbook, to run one macro. Is it possible to do this or do I need to follow the route of creating a separate macro for each (forms) button?
The route I have begun is to create this simple navigation macro is as follows.
Sub Goto200and100() ActiveSheet.Shapes("Button 2").Select Range("Q1400").Select End Sub Sub Goto100and50() ActiveSheet.Shapes("Button 91").Select Range("Q1400").Select End Sub
Is there a way to add a reference to a button, which could show the user what the button does before he clicks on it. I'm thinking something similar to moving the mouse to a program in the Windows taskbar.
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
I need to have my macro select all buttons in the current row (including the button I clicked on and delete them. There are many rows with buttons. Each row needs to have this button. So I need it to be row specific.
I know that this is how to select the row that the button is in:
But I do not know how to select the buttons in that row. It needs to be included in this:
VB: Sub move() Dim shname As String, sh1 As Worksheet, lc As Long, rw As Long Set sh1 = ActiveSheet lc = sh1.Cells.Find("*", , , , 2, 2).Column rw = sh1.Buttons(Application.Caller).TopLeftCell.Row
[Code] .....
After many attempts and alot of research, I have some more code for this problem: This deletes all buttons in the sheet:
VB: Sub DeleteShapes() Dim shp As Shape Dim myVar As Shapes ActiveSheet.Activate
[Code] .....
And this deletes the current button only:
VB: Sub pressbuttons() With ActiveSheet.Buttons(Application.Caller) .Delete End With End Sub
Any way to either limit the first code to just a particular row, or expand the second one to the entire row.
I have an excel spread sheet set up with a button I created (a colored rectangle with text) that has been asigned a macro. When I print this spread sheet I do not want the 'button' to print on the page.
I have several Activex buttons in sheet "Options" and I would like to automatically assign each button to the same macro "Run_Options", in order to execute the macro "Run_Options" when I do click over any button.
I have a couple of combo boxes with lists to generate data for a dynamic chart. Elsewhere on the page I have hyperlinks to other tabs in the form of round button shapes.
When you select from the combo box, the selected text shows in the box highlighted, which is fine, but whilst highlighted, no hyperlinks work. You have to click a random cell on the sheet, and then click the hyperlinks again. Something thats fine for me, but not for my users as there's a lot of them and they won't realise. they will just report it broken.
I created two radio buttons on a spreadsheet where a user can select one button for Yes and the other for No. When I right click these buttons, I notice the names (shown on the left hand side of the formula bar) are:
I'd like to create a macro that automatically selects the Yes or No button depending on a cell value in another tab. If the cell value is 1, the macro should select Yes. If the value is 0 the macro should select No.
I tried running the macro below:
Sub testSelectYesOrNo() If Not IsEmpty(Sheets("Sheet2").Range("A1").Value) Then Select Case Sheets("Sheet2").Range("A1").Value Case Is = 1 Sheets("Sheet1").OptionButton4 = True Case Is = 0 Sheets("Sheet1").OptionButton3 = True End Select End If End Sub
But when this runs I get a "Run-time error 438 Object doesn't support this property or method"
When I click debug, the text "Sheets("Sheet1").OptionButton4 = True" was highlighted.
I have two macro buttons on a page that hide and unhide columns. When I got to protect the sheet .. the buttons no longer work and ask me to DEBUG. Is there a way to have macro buttons performing tasks AND have the sheet still protected?
In the protect sheet window .. am I have ticked is
I have a workbook which employs 4 different userforms. Navigating thru the workbook, the user ends up at a sheet with 5 macro buttons, allowing them to choose from several different functions. I added these to the worksheet using the "forms" toolbar.
My question is this: Is there anyway to change the color of these buttons, as I can with the userform buttons? Under "format control" I can change size, font, even color of font, but I can't change the background color of the button itself. Is it possible to identify those particular buttons thru VBA and adjust it's format?
I have a spreadsheet containing a group of Macro Buttons, each button has been assigned a macro that enters specific text in the selected cell when the button pressed.
But as you scroll down the sheet, the group of buttons is left above. Is there a way to make the buttons scroll down (or up) along with the spreadsheet ?
