I have an excel spread sheet set up with a button I created (a colored rectangle with text) that has been asigned a macro. When I print this spread sheet I do not want the 'button' to print on the page.
View 2 Replies
I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.
Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.
While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.
Is there a quicker way?
I have the following macro
Sub UpdataMainTables()
'
' UpdataMainTables Macro
'
'
Sheets(" Table ").Select
Sheets("Main Data").Range("B2:B1048576").AdvancedFilter Action:=xlFilterCopy _
, CopyToRange:=Range("B2"), Unique:=True
[Code] ......
I have 2 questions
First one about avoid the movement of this macro, as you can see it starts at one sheet but the job is in other sheet when i run it it goes to the second sheet to do the job,, how i can avoid showing the movement.
Second question about th last part of the macro,, it most replace words with no thing,, if these words are not available it givs me alert,, how i can eliminate this alert.
I am trying to convert cells (all in column D) which are separated by "~" into columns. Unfortunately, running the text to columns command on several rows at a time can cause Excel to panic with an out of memory error (error #7 etc.).
The file is ~100mb and contains 500k-700k rows (I have 4GB of RAM so I know this is more a limit of Excel's 2GB RAM constraint).
Can you please help me write a macro to text to column convert each cell in column D?
I tried a macro which started with a for loop, and called the function for each cell individually, but even this led to an out of memory exception after 156,000 rows (although the same macro worked fine on a similar sheet with 700,000 rows).
Are there any other ways of clearing the Excel buffer/temporary space during the function calls to avoid causing Excel to crash?
1. I can't remember it, but I know there is a command so that the view hold and that the selected tabs and cells does not show and the same view remains until the "unhold" is called in the macro. THEN the view is updated. What is this command again? Could not find it...
2. The macro needs to delete tabs at the click of a button (easy part) but for each deletion, a message appear:
Data may exist in the sheet selected for deletion. To permanently delete this data, press Delete. Is there a way to prevent the message from popping out when the macro is executed?
I would like to know if there is a way to print several different workbooks at once but keeping my printing format which I would like to be Landscape and Fit to one page. Reason is simple as I work in a office where staff is handed in several jobs to do everyday. They finish the jobs and log all the info on the database. I log on to database and put all their daily diaries and because it is all over the place I have to go in each file and set printing preferences which takes an hour in the morning and hour in the evening. I could do with some sort of automation where all diaries are automatically printed in Landscape and Fit on one page.
View 2 Replies View RelatedI have a report that is generated from a manufacturing process that looks like the example below. the report is 40 pages long when all the data is printed. i am looking for a way to only print this range if a dimension is "out of tolerance". if the dimension is within tolerance, there is always the "garbage" text of plus and minus. if every row is "within tolerance" in the range the cells in the OutTol column would all contain the "garbage" text but it will not always be identical. so, in summary, actual OutTol values = print and all "garbage" = not printed.
NomActDevLoTolUpTolOutTol
Y-0.956-0.9480.008-0.0030.0030.005
Z-1.413-1.4130.000-0.0030.003---*|++++
DIA0.4220.4240.002-0.0030.006----|+*++
POS0.0160.0110.005
I have a workbook that has a print button on it. The print button macro prints many tabs on the workbook. But, on ONE of the tabs, it inserts information from a range of cells, prints, goes to the next cell in that range and prints, until complete.
The problem I'm having is this: When there is only ONE cell in that range that has information in it, it gets stuck in a continuous loop and prints a ton of blank pages.
Here's my code for this portion of the macro:
I have tried to record the steps in a macro that are involved in printing a worksheet to a PDF. It recorded everything up to and including hte printer selection. However, it did not record the filename dialog box actions and beyond.
I have Adobe Acrobat 8 and Excel 2003.
I have a table which I wish to print out, however I wish to print two copies of this table, one with only the rows which contain "AM" in column X, and one with the rows that contain "PM" in column X. There is also another complication in that several rows on the spreadsheet, containing data in column X, are hidden. The print range is everything between A3 & AG120.
I tried using a filter but found it unhid all the hidden rows and printed them out which I don't want.
I have been using Excel for some time now but just started working back with the Macros! Finally figured out that you had to turn on the Designer tab to get to some of the functionality of the macros. I haven’t been able to find ANYTHING ANYWHERE to tell me how to create buttons or Icons in the 07 Excel!
View 2 Replies View Relatedadding custom 16 x 16 buttons to toolbars, which weren't preset images or using the built in deisgner.
Was hoping there may be an add-in giving more variety of buttons or a way to import set images. Very frustrating as there are many microsoft 16x16 bmps / icons that would be ideal but the choice is extremely limited.
Is it possible to link 3 buttons to one macro.
What I'm trying to do is have 3 buttons:
Load Button:
-Which makes a copy of the current sheet, renames it, and freezes its values
Print Button:
prints all the sheets
Clear button:
deletes all of the named sheets
I'm sure this can be done with an if then else statement, but I'm just not sure how to set it up to capture input.
I can't write macros, so have to create them by actually recording the process. I did that just now and then copied it into the Command button. When I run it from Tools>Macros, it works, but when I run it using the Command button it fails.
I'm trying to copy and paste values current MTD figures (P18:P39) to previous MTD area (W18:W39), but the command button fails at this selection. Cells 28-35 are blank, but I don't think this makes any difference, as I've tried the command button with those cells zeroed out.
This is what I recorded initially; this works from Tools>Macros
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 04/01/2008 by Lucertola
'
'
Sheets("Reconciliation").Select
Range("P18:P39").Select
Selection.Copy
Range("W18").Select.....................
I want to put navigation buttons on each of the twelve spreadsheets, in one workbook, to run one macro. Is it possible to do this or do I need to follow the route of creating a separate macro for each (forms) button?
The route I have begun is to create this simple navigation macro is as follows.
Sub Goto200and100()
ActiveSheet.Shapes("Button 2").Select
Range("Q1400").Select
End Sub
Sub Goto100and50()
ActiveSheet.Shapes("Button 91").Select
Range("Q1400").Select
End Sub
Is there a way to add a reference to a button, which could show the user what the button does before he clicks on it. I'm thinking something similar to moving the mouse to a program in the Windows taskbar.
View 4 Replies View RelatedI have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
I am working with excel 2003. I get a workbook sent to me via Email that has 12 tabs on it and each tab has to be printed out. The fastest way that I know, to get this done is start with tab 1; hit alt+f, u, alt+f, enter, Ctrl+P, enter, Ctrl+page down ( to move to next tab and do it all over again), each tab is a slightly different width so I am constantly have to use "Fit to Page" but each tab will fit on one page easy.
I was wondering can I use a key stroke macro to print this workbook. I actually get 5 workbooks like this every night, it does not really take that long, maybe I am just being lazy, I was thinking that I might be able to use a key stroke macro and then name it for what ever workbook it works with (workbook 1 print ) but I don't no if this will work or if there is an easier way to get the printing job done.
I can't upload the workbook but I could create a simple say 5 tab workbook that has no data in but has same formatting and upload that if you need to see what I am doing.
I need a macro for printing a document, Could anyone supply me with the macro. And how to acivate it and sve in the sheet
View 5 Replies View RelatedI run a scorecard for 150 projects and how to write a macro the would scroll through my drop down list with all my projects and print them to a PDF with a certain file name. When a project number is selected, my scorecard will auto populate with the information. Currently I do them 1 at a time.
My drop down list is in cell C4 and my validation list is in R1:R150. My tab name is CoverSheets.
There's a spreadsheet containing 2 Sheets, lets'say Sheet1 and Sheet2.
The first one, Sheet1 contains raw data (imported from a database through SQL), hence there are no formulas in it.
This sheet contains among several columns, this one labeled "PC" (column G), non-sequenced numbers only (ex., 14014, 14015, 14019, 14113)
The second sheet is used for retrieving some other information from Sheet1, based on PC number, which is input on cell Sheet2!P15, for authorization purposes only.
The fact is that I have to input every PC number, one by one (14014, 14015, 14019...) then send it to printer one by one by every PC number entered.
In this example, type 14014 in P15, then print button; again, 14015, then print button, and so on.
I'm wondering if there's any way, by selecting some (not all) PC numbers from Sheet1 (even when filter is set on), to have these different pages (Sheet2) printed automatically after pressing this macro button.
An extra bonus would be the possibility (other macro, possibly) to generate one or several pdf files of this selection.
i am after a macro that will print multiple sheets in hit of a button, the ranges are from A1 to the last row of the data. Now there are sometimes cells which have no data, so was not sure if this will be a problem. At momenet it take me at least couple of minutes to print everything out.
View 9 Replies View RelatedIs it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
I need to have my macro select all buttons in the current row (including the button I clicked on and delete them. There are many rows with buttons. Each row needs to have this button. So I need it to be row specific.
I know that this is how to select the row that the button is in:
VB : sh1.Buttons(Application.Caller).TopLeftCell.Row
But I do not know how to select the buttons in that row. It needs to be included in this:
VB:
Sub move()
Dim shname As String, sh1 As Worksheet, lc As Long, rw As Long
Set sh1 = ActiveSheet
lc = sh1.Cells.Find("*", , , , 2, 2).Column
rw = sh1.Buttons(Application.Caller).TopLeftCell.Row
[Code] .....
After many attempts and alot of research, I have some more code for this problem: This deletes all buttons in the sheet:
VB:
Sub DeleteShapes()
Dim shp As Shape
Dim myVar As Shapes
ActiveSheet.Activate
[Code] .....
And this deletes the current button only:
VB:
Sub pressbuttons()
With ActiveSheet.Buttons(Application.Caller)
.Delete
End With
End Sub
Any way to either limit the first code to just a particular row, or expand the second one to the entire row.
how to give attractive colours to my ordinary macro buttons to which we assign macros
View 2 Replies View RelatedI'm using the With ActiveSheet.MailEnvelope command in vb to send an email and it works fine, but the range I am selecting includes macro buttons on the sheet.
It is possible to prevent macro buttons from been printed by selecting Format Control > Properties on the button and unticking Print Object (off by default anyway).
Is there any equivalent way of preventing macro buttons from appearing in emails when a range is emailed rather than printed.
I have several Activex buttons in sheet "Options" and I would like to automatically assign each button to the same macro "Run_Options", in order to execute the macro "Run_Options" when I do click over any button.
How can I do that with a excel macro?
I have a couple of combo boxes with lists to generate data for a dynamic chart. Elsewhere on the page I have hyperlinks to other tabs in the form of round button shapes.
When you select from the combo box, the selected text shows in the box highlighted, which is fine, but whilst highlighted, no hyperlinks work. You have to click a random cell on the sheet, and then click the hyperlinks again. Something thats fine for me, but not for my users as there's a lot of them and they won't realise. they will just report it broken.
I created two radio buttons on a spreadsheet where a user can select
one button for Yes and the other for No. When I right click these
buttons, I notice the names (shown on the left hand side of the
formula bar) are:
Option Button 3 (for No)
Option Button 4 (for Yes)
I'd like to create a macro that automatically selects the Yes or No
button depending on a cell value in another tab. If the cell value is
1, the macro should select Yes. If the value is 0 the macro should
select No.
I tried running the macro below:
Sub testSelectYesOrNo()
If Not IsEmpty(Sheets("Sheet2").Range("A1").Value) Then
Select Case Sheets("Sheet2").Range("A1").Value
Case Is = 1
Sheets("Sheet1").OptionButton4 = True
Case Is = 0
Sheets("Sheet1").OptionButton3 = True
End Select
End If
End Sub
But when this runs I get a "Run-time error 438 Object doesn't support this property or method"
When I click debug, the text "Sheets("Sheet1").OptionButton4 = True"
was highlighted.
I need a VBA code to remove multiple macro buttons from 31 multiple excel sheets with a single click.
View 9 Replies View Related
