Hide Column Based On A Value
Jul 6, 2014
Is there any formula to hide a column based on a value . I know we can do that manually using hide and Unhide option.
but I want this to be done dynamically without A MACRO.
In the attached sample spreadsheet, the row 3 (status) has either 0 or 1 that is feed from another sheet and change dynamically. I need to hide all columns with a value 0. In this sample columns B,D,H,I,J,N & P must be hidden.Suppose If the staus value is changed from 0 to 1 then the column must be displayed (unhide).
View 1 Replies
ADVERTISEMENT
Jul 4, 2012
I have a Worksheet were I have a formula in cells from D5 to ALO5. That read "Hide" or "Unhide".
I would like the column to each hide individually hide if that column has "Hide" in in it. If it has "Unhide" in the column then it becomes visible again. The range of the columns match the formula cells which are "D" through "ALO".
View 1 Replies
View Related
Dec 30, 2009
I wrote some simple code to work through a number of rows and hide the rows which contain a value of "XXX". For some reason, when the code hits the line denoted with? it hides the first row of "XXX"'s but then starts all over again at very first line of code outside the loop.
Sheet1. Range("start_1").Select 'cell c53
Do Until ActiveCell.Value = "EOF" 'cell c266
If ActiveCell.Value = "XXX" Then
Selection.EntireRow.Hidden = True '????
ActiveCell.Offset(1, 0).Select
Else
ActiveCell.Offset(1, 0).Select
End If
Loop
View 2 Replies
View Related
Jul 31, 2014
with a simple code that could:
If column K2:k466 is blank or says "No" then columns L & M are hidden. If it says "Yes" it is not hidden.
Also,
If Column N2:N466 is blank or says "No" then Columns O,P,Q,R are hidden. If it says "Yes" they are not hidden.
Finally,
If Column V2:V466 has a zip code (or number) then columns T,U,W,X,Y,Z,AA,AB,AC are present. If there is no value in any of V2:V466 then they are hidden. .
View 12 Replies
View Related
Feb 28, 2014
My worksheet contains the following:
- Column G includes fifteen rows of a formula (beginning at G9) that returns a dynamic list of values based on criteria chosen through a dropdown box. The list can be anywhere from five to 20 values depending on the selection. When the potential matching values for the list are exhausted, the formula returns ""
- Column F includes one checkbox for each of the 20 rows containing the formula.
I need a script that will hide each checkbox that is next to a "blank" value. That is, if the cell in Column G = "", I need the corresponding checkbox to be invisible. Unfortunately, hiding the entire row is not an option. If the script could uncheck the boxes when hidden, that would be a bonus, but isn't absolutely necessary
View 4 Replies
View Related
Nov 5, 2009
a way to hide used rows if the color of the cell in column I is green( color 35 vba) but only if the cell is visible will the macro change the rows visible state, in other words already hidden rows will remain hidden regardless if they match the color requirement.
below is some pseudo code to try to explain better what I'm trying to do. The below code doesn't actually work but I was wondering if someone knew some code that would actually do what I've described.
View 12 Replies
View Related
Jul 11, 2007
I am trying to implement the following:
After the user selects something using the validation list in cell F38, the macro should check in column Q in the rows 44 till 425 for "hide". For each row in which it finds "hide" the entire row should be hidden.
I have the code below but it does't work yet. It calculates for ages and afterwards only the first 2 rows of the 381 are hidden (probably because the third row is not "hide").
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As Range
Dim ThisCell As Range
Target = Range("F38")
[code].....
View 9 Replies
View Related
Jul 11, 2007
After the user selects something using the validation list in cell F38, the macro should check in column Q in the rows 44 till 425 for "hide". For each row in which it finds "hide" the entire row should be hidden.
I have the code below but it does't work yet. It calculates for ages and afterwards only the first 2 rows of the 381 are hidden (probably because the third row is not "hide").
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As Range
Dim ThisCell As Range
Target = Range("F38")
Set MyRange = Range("Q44:Q" & Range("Q425").End(xlUp).Row)
For Each ThisCell In MyRange
If ThisCell.Value = "hide" Then
ThisCell.EntireRow.Hidden = True
End If
Next ThisCell
End Sub
View 9 Replies
View Related
Aug 15, 2006
I have read several related threads and tried to adapt their answers to my application with no success. I am trying to write a macro that will hide rows based on that row's value in a certain column. Specifically, column AB contains sums and if a sum equals 0 I want to hide that row. The sums start at AB5 and go to AB118 but there are 4 gaps in the column at rows 25, 47, 70, and 94.
View 9 Replies
View Related
Nov 22, 2007
I am trying to hide rows based on the contents of column BS. It the cell is empty (not just zero value, but completely empty of all formulae), then I want to leave it unhidden, then if the cell value is less than the value in cell E2 I want to hide the row. This code doesnt seem to like the first if...then next i
Sub hiderows()
Dim i As Long
Set v = cell.Value("$E$2")
' Turn off screen refresh for speed
Application. ScreenUpdating = False
' Get last row Col BS
For i = Range("BS2000").End(xlUp).Row To 15 Step -1
If IsEmpty(Cells(i)) Then Next i
ElseIf Cells.Value(i) < v Then Rows(i).Hidden = True
End If
Next i
' Turn on screen refresh
Application.ScreenUpdating = True
End Sub
View 4 Replies
View Related
Jan 13, 2008
What I have is a sheet where the cells in range A9:A3508 have a formula that evaluates to blank if any of a variety of conditions are not met (date falls outside desired range, does not meet filter criteria, etc.) and a number if these conditions are met. What I am looking for is for all rows in that range where A is blank to be hidden (not deleted), and for this to automatically update every time A changes (meaning that if A goes from blank to a number, that I will need that row to become unhidden again). I have considered just recording the macro and calling the function with a button, but as this is for external users, some of whom may be unfamiliar with Excel, I would rather keep it as clean, simple, and automatic as possible.
View 5 Replies
View Related
Mar 2, 2008
Have 2 columns with time values and the third showing the time difference ( no Problems). what to hide the row if the time diff is > 2 seconds? (problem) What would be the best why to do this
{Sub TimeDiff()
Dim i As Integer
Dim timevalue As Date
timevalue = "00:00.20"
Application. ScreenUpdating = False
With ActiveWorkbook. Sheets("Racing")
For i = 4 To . Range("M1") - 1
If .Range("P" & i) > timevalue And Rows(i).EntireRow.Hidden = False And .Range("P" & i) <> "" Then
Rows(i).EntireRow.Hidden = True
End If
Next i
End With
Application.ScreenUpdating = True
End Sub
View 2 Replies
View Related
Apr 16, 2008
There are 2 sheets in the excel worksheet. in one sheet there would be drop downs
the 2nd sheet will have 4 columns A,B,C,D) Depending on the selection in sheet1. If a1 = Y then columnA in the 2nd sheet should be hidden. If a1 = N then columnB in the 2nd sheet should be hidden. how can this be done..The key is the columns to be hidden are on a different sheet and that is where I am having the difficulty.
View 3 Replies
View Related
Jun 12, 2008
I would like to hide rows (A17:A180) based on the value in the cell. If the value in a specific cell is "X", hide the row...if anything else is in the column's cell (A17, etc), show it.
View 6 Replies
View Related
Jan 29, 2014
I would like to have a macro that will hide a column based on the value in the row. I have multiple sheets and if row 4 (or more specific, B4:AL4) contains a zero, then I'd like the whole column to be hidden on that sheet. I'd like to be able to run the macro and it evaluate every worksheet.
View 5 Replies
View Related
Aug 5, 2008
I have an Excel workbook with multiple sheets. In one sheet, there are many columns that automatically get hidden based on cells values (=1) in another sheet as I type. I use this
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$C$7" And Target.Value = 1 Then
Sheets("Stakes").Range("E:E").EntireColumn.Hidden = True
Else
If Target.Address = "$C$7" And Target.Value <> 1 Then
Sheets("Stakes").Range("E:E").EntireColumn.Hidden = False
End If
End If
End Sub
Recently I had to change the second sheet that instead of manually entered values, formula results appear in cells. And the above code doesn't work anymore, columns are always stay unhidden. How can I achieve what I want? I need columns get hidden if formula results =1.
View 4 Replies
View Related
Mar 19, 2009
I have a workbook with two sheets of data. I want to hide column B of Sheet2 and clear contents of range B2:B50 if the value in A1 of Sheet1 is "a".
View 2 Replies
View Related
Nov 8, 2006
I have a pivot table with the column fields as dates. I will like to be able to use VB to dictate which value to show. Here is brief code in which I just recorded...
Sub Button1_Click()
Range("B7").Select
With ActiveSheet.PivotTables("PivotTable1").PivotFields("Date")
.PivotItems("10/30/2006").Visible = False
.PivotItems("10/31/2006").Visible = True
End With
End Sub
I would like to show current day only using =today() or something similar. THis would eliminate the user having to modify the pivot tables daily.
View 5 Replies
View Related
Aug 22, 2014
In one spreadsheet, I want to have a command button that will hide all rows where the date column (column A) shows a date older than one week from today. When this button is clicked again, all rows will unhide again. Preferably the Command button title would change to reflect whether it is on the hide or show cycle (for example "Click to Hide all older than one week" and then "Click to Show all events") .
View 9 Replies
View Related
Jun 18, 2009
I want to create a macro that checks whether a specified range of columns is hidden, and
a) hide them if they are not hidden, or
b) unhide them if they are hidden,
i.e. toggle the Hide state.
What method can I use to query the hidden state of a selected range of columns and return a boolean value?
View 2 Replies
View Related
Jun 23, 2014
I was wondering if it is possible to hide a column(s) but still have data in that column be visible at the bottom of the spreadsheet. For example, if I hide column G can it only hide the column from rows 1 - 50 and then the column will appear after row 50?
View 3 Replies
View Related
May 27, 2014
In the attachment is a file, which allows me to specific a Column and hide. For Example enter "H" in the InputBox and Submit the Column "H" is hide.
What do i have to change in the code if i want to hide the "H" and the Column two columns next to "H". In this case "J".
HideColumn.xlsm
View 3 Replies
View Related
Oct 16, 2013
Trying to hide a rows based on value being inserted to A1 = 0 (if value is >0, then unhide), but it's not working.
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("A1").Value = 0 Then
Rows("33:42").EntireRow.Hidden = True
Else
Rows("33:42").EntireRow.Hidden = False
End If
View 6 Replies
View Related
Mar 21, 2014
formula on the attached spreadsheet (Questions UK) I would like the following to happen:
If D3 is YES then rows 91 to 319 hide
If D3 is NO then rows 6 to 89 hide
If D4 is YES then rows 6 to 89 hide and 164 to 319 hide
If D4 is NO then rows 91 to 162 hide
If D5 is YES then row 6 to 162 hide
If D5 is NO then row 164 to 319 hide
View 6 Replies
View Related
Mar 23, 2009
I have a "master" tab that has a dropdown menu (via a validation list) which will determine what the spreadsheet does. Based on the value selected via this dropdown, I would like to show the relevant tabs and hide the irrelevant tabs. I would prefer for this to happen automatically without a macro.
View 5 Replies
View Related
Jan 2, 2014
automatically hiding a row(s) based on a cell value.
I have various numbers on column K, rows 12-47.
Example:
k12=680
k13=76.38
k14=0
k15=55.33
k16=0
etc.
In the above example, I would like row 14 and 16 to automatically hide (and unhide if the formula calls for the cell to be greater than 0)
View 5 Replies
View Related
Aug 1, 2014
I have been on a very steep learning curve as I try and write a system for my employer (small motor dealership). My boss still does everything by hand as does the stock controller which is very time consuming.
To the point.
My worksheet consists of rows 1-135 and column A-AC
Vehicle stock numbers are listed in column A.
In Column AA is the month in which a vehicle(s) are sold.
At month end I would like to hide all the rows of vehicles that have been sold in a particular month - ie July. So we may have 40 sales in july scattered throughout the worksheet which need to be hidden.
View 1 Replies
View Related
Jan 9, 2009
I would like a macro where I it will examine Cells A8 down to A27 to see if there is a value. If there isn't a value, I want that row hidden. I would like for it to always run (i.e. if a value is put into that cell, the row reappears, otherwise it is always hidden).
View 9 Replies
View Related
Oct 27, 2003
I have a worksheet with an age row of 20 - 99 (and a bunch of other data)
A user enters the starting age, and then the sheet fills in the rest of the cells.
If the user enters 50, the age fills from 50 to 130.
Before printing, I manually hide the rows (using the hide row command) over age 99.
Is there an easy way to do this without macros? I am Excel impaired!
I tried using Auto filter - but I have to rerun the filter each time (it is not automatic).
View 9 Replies
View Related
Jun 16, 2008
I have a macro that hides row A80 (a grand total for adding numbers). But, if I were to insert, or delete a row, my macro continues to work, but no longer reflects the appropriate row "grand total" row and hides a blank one because of this shift. Can I somehow freeze a row in my macro so regardless of what is altered in previous rows, my macro will always hide my grand total row?
View 6 Replies
View Related
