I have a worksheet called "Calendar" with values D4:X4
if the value "Name" appears in any of these cells then the corresponding column where the entry appears will be hidden. otherwise the column will be visible.
I'm trying to hide columns based on information in another column. If that column contains "A" or "B", hide columns "U" through "W". If it contains "A", "B", "C", or "D", hide columns "V" through "W". Etc, etc., so on and so forth...
I've snipped the code I found earlier and modified it to (what I thought) was correct for my application, but it doesn't seem to do anything. (btw, should I get an error if it doesn't run correctly?)
Here is the code as modified:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "P:P" Then
If LCase(Target.Value) = "A" Or LCase(Target.Value) = "B" Then
Columns("U:W").EntireColumn.Hidden = True
ElseIf LCase(Target.Value) = "A" Or LCase(Target.Value) = "B" Or LCase(Target.Value) = "C" Or LCase(Target.Value) = "D" Then
I would like to have a VBA macro that would look over my entire spreadsheet and hide the individual row if any cell in Column A contains the text "xyzzy". The "xyzzy" can be anywhere in the cell....beginning, middle or end.
View 9 Replies View RelatedI'm working on a project in which I have 50 states + DC listed by 2-letter abbreviation, and want to return a value in another column that will be a non-unique number (some will duplicate in the second column.)
Also need to do this same operation with first column (state) and third column, which also is comprised of non-unique numbers.
Hlookup, lookup & pivot tables seem to not be a fit for this.
I'm trying to write macro for hiding columns based on a drop down answer. The drop down would be in cell B7 on Sheet 1. The colums affected would be in each worksheet in the workbook. The data validation would have a drop down selection choice of 1 through 16. The columns affected range would be H through W. For example, in the drop down if 1 was selected, only column H would show. If two, H and I would show...etc. This macro should affect all worksheets in the workbook EXCEPT sheet 1.
View 2 Replies View RelatedIn building my pivot table my data that I want to show in the column area is showing up as rows stacked on top of each other. In the column section I'm trying to show Total Budgeted Amount next to Total Actual Amount but on the layout it's showing the two stacked on top of each other is there some kind of hidden key that I'm missing?
View 3 Replies View RelatedThe attached sheet takes information from another sheet in my work book (I am only providing the sheet I was to work with). I want all rows where the value in F is 0 to hide automatically.
Attached File : Book2.xlsx
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address(False, False) = Sheets("Sheet2").Range("A3") Then 'A3 is the cell where your Yes/no choice is
Select Case Target.Value
Case "Yes": Sheets("Sheet1").Range("A7:A22").EntireRow.Hidden = True
Case "No": Sheets("Sheet1").Rows("A7:A22").EntireRow.Hidden = False
End Select
End If
End Sub
I have a spreadsheet that I'm trying to hide specific columns. In Row 6 I have the day of the week (Sun thru Sat) and Row 7 with the respective date starting in column F to column ZZ.
I would like to hide all columns with Saturday and Sunday in row 6. I tried using VBA but I'm new to coding and can't figure out the correct syntax.
I am trying to search the cells in Column A around rows 54 to 77. And if the cell says "Yes" it should hide the row. I think I'm on the right track, but can't seem to get it work.
[Code] .....
I am trying to hide columns where the Value in the cells on row 9 is "", that cell being populated with a formula where the result is "". However I am getting the Compile Error Message 'Next without For'. Any clues?
Sub GraphC()
Dim a As Integer
Dim ColumnVar As Variant
ColumnVar = Array("B", "C", "D", "E", "F", "G", "H", "I", "J", "K")
[Code] .........
I am stuck with a task.
I need to hide all rows in a worksheet except the rows which contain the word which the user inputs through find (CTR+F).
The input word should be captured in a variable and this should be searched in all rows & hide all other rows in the sheet which does not contain this word.
Here is what I have so far (debugger highlights my CheckBoxLD.Visable arguments)
Yes, this is an activeX checkbox
Code:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object)
If Worksheets("Dosing").Range("BM21").Value = 0 Then
CheckBoxLD.visable = False
Else: CheckBoxLD.visable = True
End If
End Sub
I have numerous tabs in this file, but all of the tabs all summarize to the first tab called "Annual Record".
So after "Annual Record", tabs follow as "WO1", "WO2", etc...
On the tab called "WO1", I have cell AJ5, which can have 3 status selected (Data Validation List), which is either Inactive, Open, or Completed. If cell AJ5 on "WO1" says "Inactive", then I want a named range on "Annual Record" to be hidden. Right now I have the range named "WorkOrder1". This named range is essentially rows 4-7. So if it's easier to hide rows vs. a named range, then so be it. I also would like it to happen automatically (perhaps what you would refer to as a change event). When cell AJ5 is change to either "Open" or "Completed", then the rows would unhide. I'm thinking that this would be repeated for tab "WO2". If cell AJ5 says "Inactive", then rows 8-11 on the tab "Annual Record" or the named range "WorkOrder2" would be hidden. And again, if the cell AJ5 is change to anything other than "Inactive", then the rows or range would unhide.
I have a cell with today's date on it. i.e., cell A1 = today()
Then, I have rows of data with one of the columns with a date on it. I've put in an object (button), where when the user presses this button, I want all the rows of data that do not have the date on cell A1 to be hidden.
Then on the second button, when the user presses the button, to unhide all the rows that were previously hidden. To make it easier, I can simply state it to unhide all the previously hidden rows (but NOT columns - there are still hidden columns which I want it to stay hidden).
So in sum, using table below. If I have on cell A1 - today's date is 2 Mar 2013, pressing first button would hide the row with Jane Y's record. Then pressing second button would then unhide all previously hidden rows.
DATE
NAME
DEPT
1 Mar 2013
John X
Accounting
2 Mar 2013
Jane Y
Operations
3 Mar 2013
Joe Z
Marketing
How can I accomplish this?
I'm using the below macros to hide or unhide rows based off of a value in column A. Column A contains an If statement that looks for a value in column F, and depending on whether the corresponding cell in column F contains a value the if statement returns either True or NO-IF(F>0,True,"No).
It currently takes quite a bit of time to run this macro. Given the specs on this machine, I'm convinced that there is probably some loop or inefficiency in my code.
Sub Button1_Click()
Dim cell As Range
For Each cell In Range("a59:A1472")
[Code]....
I need to hide 8 rows (30-37) based on a value in cell B28.
If the value is 2 then only show rows 30 and 31
If the value is 3 then only show rows 30, 31 and 32
Then continue this up to the user puts in the value of 8 and no rows are hidden.
I'm trying to come up with some code that will hide a number of rows within the range row 7 to row 15 based upon the value of cell G1.
e.g if G1 is 1 rows 8-15 are hidden, if it is 2, rows 9-15 are hidden i.e the number of rows visible within that range equals the value of G1.
I need to run this funtion from the starting column (N) to the last column ( dynamic).
Sub HideUnits()
Dim rngData As Range, rngHide As Range
Application. ScreenUpdating = False
With Sheet1
.Rows(1).Insert
.Range("B1").Value = "Temp"
Set rngData = .Range("N1:N" & .Cells(Rows.Count, "N").End(xlUp).Row)
rngData. AutoFilter field:=1, Criteria1:="*Units"
Set rngHide = rngData.SpecialCells(xlCellTypeVisible)
rngData.AutoFilter
rngHide.EntireRow.Hidden = True
.Rows(1).Delete
End With
Application.ScreenUpdating = True
End Sub
As you might be able to tell I need to hide all the columns with a specific word in the heading. I'm pretty sure I'd need to loop this somehow, but I'm not good with VBA.
I want to hide the row of player on the ATP Stats worksheet that have 0's in all competition, the file example can be download in next link.
View 14 Replies View RelatedI am trying to create a macro based on a User Selection in a Combo Box. All I want this Macro to do is based on one of the 5 selections the user makes in the Combo Box, it updates two pivot tables Column Labels. I want it to first clear out what is currently in the Column Lables for the Pivot Table and then set it as follows below.
So my problem is that the ResetPivotTable calls (call function shown at bottom) clears all just about all of the fields. I am also getting errors sometimes. The first time I run it, it clears out the Column Labels and works fine. The second time I run it, it clears out everything...
So here is what I have for the first part of the Macro. This part seems to be working fine; however it is the ResetPivotTable functions that are causing the problems. These seem to clear out all the labels, but also seems to be throwing errors.
HTML Code:
Private Sub ComboBox1_Change()
Application.ScreenUpdating = False
'Refreshes the Pivot Table in case it is stale
Sheet12.PivotTables("PivotTable1").RefreshTable
Sheet12.PivotTables("PivotTable2").RefreshTable
[Code]...
'Calls function to hide all the empty colums in the report after updates have been made Call HideEmptyColumns2
End Sub
And the PivotFields function is as follows:
HTML Code:
Sub ResetPivotTable1()
Dim pvt As PivotTable
Dim pvf As PivotField
Set pvt = Sheets("Cost Summary").PivotTables("PivotTable1")
[Code]...
I've tried several approaches on how to code this, but can't figure out how to work it. I have a large spreadsheet; which dynamically changes in both column and row counts. So, I have an array of values. If any cell has a negative value, that cell text needs to be changed to red AND that row needs to remain displayed. If ALL values in that row are >=0 then the row can be hidden.
The array is actually a pivot table named QTD
For Example: If cell D5 = 5 and F5 = -3 then Row 5 should remain displayed.
If Cell D6 = 5 and F6=0 then row 6 should be hidden because all values are > 0
Then I was thinking of using the case statement to hide the rows but can't figure the syntax. I'm open to any other means of performing the taks as long as the initial array dynamically to encompass all the data.
I have a workbook that has about 30 different sheets with names titled "Joe", "Jane", "Paul", etc.
I have a Cell (B12) that has been formatted as a dropdown menu with about a dozen different options such as "Audit A" , "Audit B" or "Other" etc. What i'd like to do is hide or display certain sheets based on what the value is in cell B12.
if cell B12 says any of the following "Audit A" or "Audit B" then it would hide certain sheets. If the value in B12 says "Other" or something other than "Audit A" or "Audit B" then it wouldn't hide anything at all. I tried searching and couldn't find anything like this although it may have been answered before.
the support this board has given me as I learn VBA. I have three columns - Q, R, and S. I only need to see columns R and S if the cell values don't equal those in column Q or each other. So if I have cell values like the ones listed in the example below, then I don't need to see columns R and S.
Q Header
R Header
S Header
50
50
50
[Code]....
I have a macro that I am trying to add a feature to at the end of the code that hides blank rows. I have tried numerous methods based upon other forums, but my code does not seem to work and does not hide blank rows. In red is the section of code that I am having trouble with.
Sub Update()
Dim c As Object
Dim rngA As Range
Dim cc As Object
Dim AA As Range
'Check every cell in the range for matching criteria.
[Code] ...........
I am using Excel 2003. I have created a workbook containing two sheets. The first sheet is designed as a form for our managers to complete. The fields they are required to complete are based on the selection they choose from a drop down field (set up through data validation).
I have created a command button which when you click it opens up the second sheet of the workbook asking you to complete the individuals work pattern. I am trying to hide this button so that it only appears when you select certain options from the drop down field.
I have looked back through posts on here and have tried adding the VBA code to the worksheet around commandbutton1.vissible = False in an IF statement but can't get this to work. A colleague has suggested that you can't hide command buttons because they are fixed items - is this the case.
I have an elaborate spreadsheet that I have made for my company. I will give a little background how I have it set up:
E6 contains a drop down menu of all products that we sell, and line items are populated based on the selection here. In columns N and O, I have a "Business Partner Costs" table that calculates a specific discount % based on the business partner.
Some of our products are sold to BPs with no discount. For these specific products, I am trying to get the BP Costs table to disappear, or hide.
Basically, I want something like: "=if(or(e6=ae2,e6=ae7,e6=ae12,e6=ae13,etc),hide columns N&O,show columns N&O)" in macro format.
I would like to write a macro that automatically hides columns of data
based on the value of a cell (I2) with a picklist. Cell I2's picklist is
monthly values (formatted as Jan-10 though Dec-10 but real values are
1/1/2010 through 12/1/2010). I have a range that contains work week end date
values (1/8/2010 to 12/31/2010) in L6:BK6. I would like to have the macro
hide columns that are less than date value chosen in I2.....
I'm trying to determine a range of columns I would like to hide by applying HLOOKUP on certain reference cells. The following was what I did:
Sub HideColumns()
' HideColumns Macro
colx = Chr([A25].Value + 64)
coly = Chr([A26].Value + 64)
Sheets("Sheet 2").Select
Columns("" & colx & ":" & coly & "").Hidden = True
'Selection.EntireColumn.Hidden = True
Sheets("Sheet 1").Select
Range("B1").Select
End Sub
I'm referencing cells A25 and A26 as the range of columns I would like to hide in Sheet 2. I equated the cells in Sheet 1 to columns in Sheet 2. Unfortunately, the result was columns being hidden from column 1 to column x instead. I would greatly appreciate if anyone can kindly correct my macro. Also, may I ask how I can distribute the columns evenly after hiding/unhiding?
I have a worksheet that has >10 rows of data and over 150 columns. The values in the cells for individual row include NA, NE, D, A and S. Each row will have one or all of these values in one of the cells. Here is the question:
How do I hide columns containing 'NA' in the cell for a particular row, when only that row is selected by clicking on any cell in row 'A'? For example: If my row 3 cell values for column A, J, R, and X are 'NA' I want to hide the column containing 'NA' only and display everything else? And only when I click on row 3 column 'A'
