Insert Cell Contents From One Column Into Another Based On Specific Part?

Jul 30, 2014

I have a spreadsheet with four columns of text.

In column A, i have multiple levels followed by a letter (i.e. Level 1A, Level 1B etc).

In column B, i have some other details and then so on and so forth.

In column C/E/G lets say, i want to copy the information from column A to show only items that appear as "Level 1" (not "Level 1A", i only want it to check for things without the letter at the end). Then the same in column E but with "Level 2" and so on and so forth.

Column A...Column B-Column C...Column D--Column E...Column F--Column G...Column H
Level 1A....Metals----Level 1A....Metals ---Level 2A....Integral---Level 3A....Television
Level 1B....Energy----Level 1B....Energy--- Level 2B....Flowers---Level 3B....Kitchen
Level 1C....Synergy---Level 1C...Synergy--Level 2C....Full
Level 2A....Integral---Level 1D....Orders
Level 2B....Flowers
Level 1D....Orders
Level 3A....Television
Level 3B....Kitchen
Level 2C....Full

I also have data in Column B that is to do with column A (i.e "Level 1A" - "Metals") and so on with the following columns. I want the items that are in column B to also move over to column D when the things from Column A move to Column C, so at the end it will appear as below so it appears as above.

View 1 Replies


ADVERTISEMENT

Copy Only Part Of Cells Contents Based On Condition?

Jul 6, 2014

I will have 2 columns. In column B, will be a list of invoice numbers. Now each one starts with the "job number" (Ex. 51APGC01) then a dash and unique number per invoice. (Ex. 51APGC01-01)

In column A, will be a list of Purchase Order numbers sent by the customer so we can bill. Now, sometimes we get one PO for multiple invoices, (Ex. 03, 05, 06, 07.....)

What I am looking to do, is when I get these PO's, I enter them in and then I print a report for our billing Dept. The way the output line (cell) will read, is Job Number, then each unique number: (51APGC01-03, 05, 06, 07)

There are multiple jobs and each one has it's own report, so the job number will be dynamic and defined else where in the workbook. I can define that. It's just getting the numbers after the "-" and putting them in only.

View 5 Replies View Related

Insert X Rows After Specific Cell Value In Column

Aug 20, 2009

I have a dataset that i want to update, to do this I want to insert 8 rows after each row that has a value in Column C 2000. The set has 600,000 rows, comparing countries (cty, cty2) from 1980-2000. I want to make room for information up till 2008. I see lots of codes for doing this but I will also need help with actually inserting into my spread sheet.

View 3 Replies View Related

Insert Pictures Based On Cell Values From One Specific Folder

Mar 14, 2014

where i have a products list and respective pictures in a folder. What is should do is to get the relevant pictures appear on the screen when i select the relevant name.

View 1 Replies View Related

Insert Today Date In Specific Cell When Any Cell In Column Changes?

Nov 12, 2013

I would like to know how to use a VBA code to insert today's date into a specific cell (B9) when any cell in column B (B2:B8) has changed.

View 3 Replies View Related

Copy Part Of Cell Contents

Dec 2, 2011

I need a way to copy part of contents from a cell, the cell contains product information like size, name and weight of a product, and I need a copy the weight to be put in it’s own cell, here’s a copy of one cell “E65 MAPP SKDV 5 DIGIT 90G ST.K” the information I need from this is “90” the number is always followed by a capital G, but it’s between two and three digits where the lowest is 55G and the highest is 300G. Is this possible?

View 6 Replies View Related

To Find Part Contents Of A Cell

Apr 16, 2009

I've got a code that does what I want it to do, but I have to select the start point manually becuase it's position varies on different documents. It's usually around row 650 out of 1200, but the cell I want to start the macro at always contains the word ELECTRONIC. What I would like to do is modify my code so that it finds that cell itself and then runs the rest of the code. I'm not very good with VBA, but I've tried a few things like Dim LR-2 and using that but I get error messages about duplicates.

Here's my code

HTML Sub Macro1()
'
' Macro1 Macro
' SALES ORDER FORMAT
'
'

View 9 Replies View Related

If Statement To Check Part Of Cell Contents

Apr 4, 2007

IF statement that looks at a cell to see if it contains a word.

ie IF A2 has " Total" in it then do this

View 9 Replies View Related

Hide Column And Clear Contents Based On A Cell Value In Another Sheet

Mar 19, 2009

I have a workbook with two sheets of data. I want to hide column B of Sheet2 and clear contents of range B2:B50 if the value in A1 of Sheet1 is "a".

View 2 Replies View Related

Excel 2010 :: Copy Contents Of Column Based On Value In Another Cell

Jul 30, 2013

I'm using excel 2010 and windows XP with a moderate amount of experience tinkering with macro programming. I know what I need is very doable but I can't get my head around what the code would look like. I must not be wording my searches correctly because most of what I'm getting for results are iterative programs based on a cells value which isn't what I need.

I'm trying to build a macro that will check a cell (C3) and based on the contents of that cell copy a column (I) to one of 12 different columns (K:V). So if the value in C3 is 1 it should copy I to K, if the value is 2 it should copy I to L, and so on.

View 2 Replies View Related

Insert Contents Of Text Box In Row / Column Intersection?

Jun 18, 2013

I have a large spreadsheet that has row and column headers. I am trying to build a user form that will basically have a row combo box (already populated with the row headers), a column combo box (already populated with the column headers) and a text box. I need what ever I type into the text box to be inserted into the cell where the row of what I pick in the row combo box and the column of what I picked in the column combo box intersect.

For Example:

If I pick "Apple" in the row combo box which is in cell B1 and "Red" in the column combo box which is cell A4 to insert what ever I put in the text box into cell B4.

View 3 Replies View Related

If Column Contains Data Then Insert A Blank Column And Shift Specific Column To The Right

Apr 22, 2009

What I'd like to do is; If column C contains data then insert a blank column and shift column C to the right.

View 4 Replies View Related

Insert Image Using Cell For Part File Name

Dec 12, 2009

Split from Open Image Using A String & Cell For File Name. what it looks like, but maybe I am not using the FollowHyperlink correctly?

Sub testFloodMap()
Application. ScreenUpdating = False
Sheets("FloodMap").Select
'Picture = ActiveSheet. Range("W4").Value This works manually with the path in "W4"
'Now I tried to use the FollowHyperlink next
Application.FollowHyperlink "C:Documents and Settingsjim hutchMy DocumentsNarrative1My Appraisals2009-" & Sheets("Base").Range("B2") & "floodmap.jpg"
Sheets("FloodMap").Select
ActiveSheet.Pictures.Insert(Picture).Select
Exists = Dir(Picture, vbNormal).....................

View 6 Replies View Related

Format Cell To Always Insert Specific Thing When Specific Name Is Typed?

Apr 4, 2013

Is there a way to format cells to where - when you type in a certain person's first name, it will insert something entirely different?

This has seemed to have happened on a computer at work.

In Excel, when I type in "Martha" then tab, or otherwise leave that cell, Martha changes to "Cool"

If I type in anyone elses name - it stays that name. But if I type in "Martha" .. it changes to "Cool" with the bullet and the word Cool.

View 6 Replies View Related

Highlight Part Of A Row If Specific Cell In That Row Is 0

Oct 11, 2013

I want to highlight part of a row ie I25-P25 if a specific cell in that row is 0 (O25) Cant figure out a formula to do this.

View 1 Replies View Related

Copy & Paste Specific Column Based On Cell Reference

May 20, 2008

I've searched for a solution on the board and the internet too but to no avail; I am trying to create a macro that will select the entire column based on a cell reference G1 which is infact a Date.

Column G to Column S are pre-defined with a specific Date in row 8. If the Date in one of these columns (G8 to S8) match with the Date in cell G1, say it finds a match with H8, then I want to copy the range F14:F2000 and paste as values in range H14:H2000. The possibility of a match found is limited to a single columns from G to S.

View 9 Replies View Related

Insert Contents Of A Cell Range Into A Single Comment

Feb 15, 2009

I would like to Insert the contents of a Range of Cells into a single Comment. ie:
The contents of Range A1:A50 into a Comment placed at F1. Is there a Macro that will do this?

View 3 Replies View Related

Greyed-out Columns Based On Cell From Specific Column In Active Row Being Edited

Jul 7, 2014

I am making a spreadsheet in which I have been asked to have certain column greyed-out based on an answer that was given in a dropdown menu. Specifically, a dropdown menu in column D asks if the client was a Youth or an Adult. Depending on what the anwer is, other columns in the spreadsheet will be greyed-out; different ones for each answer. My problem is, I need this to occur for the active row being editted. For example: The first row that the user can input data into is row 4. If D4 is answered with "Adult" then certain other columns are greyed-out. However, if the next time the user updates the spreadsheet with information for a different client (now entering information in row 5) and they select "Youth" for column D5, then different columns get greyed-out. The columns that are greyed-out will depend upon the answer for the dropdown menu in column D for whatever row is actively being editted.

View 5 Replies View Related

Can Insert Column In Specific Area And Not All The Way Through Workbook

May 3, 2013

[URL]

"Is there a way to insert a column in a workbook that doesnt run all the way through the page?" Is a page break a potential fix?

View 2 Replies View Related

Return Contents Of 1 Cell Based On Contents Of Another Cell?

Mar 12, 2014

I thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.

View 3 Replies View Related

Clear Contents Of Column Based On Data In Another Column?

Apr 10, 2014

I need to clear the contents of a columns G and H starting 11th row based on what is there in F column. The macro should check for last non-empty cell in column F starting F11 (assume it finds F30 to be last non-empty cell), then it should clear the contents of G11 to G30, H11 to H30.

View 1 Replies View Related

Color Fonts In Column G Based On Contents In Column E

Jan 21, 2009

I have created an Excel spreadsheet teachers schedule for a small school with 8 teachers. I have assigned a number to each teacher (1 - 8) so that a number typed in a cell in Column E will cause a teachers name to appear in a cell in Column G. The ranges are E3:E20 and G3:G20. I hope to find a Macro that will display each teachers name in a different color.

View 5 Replies View Related

Auto Fill Column B Based Contents Of Column A

Apr 19, 2007

I have a list that is streets and addresses. All contained in column A. Cell A1 is the street name and then Column A3 is the street number. This repeats down column A for almost 1000 street names. I need to fill column B3 with the street name, as well as B4, B5, B6, etc until the street name changes. I was trying to do this with an if..then but couldn't get it to work. I also tried to work on a do.. loop looking for the change from a string to number. But my programming is a little rusty. If anyone can help I was be forever grateful. I mean the alternative is to sit here and copy and paste all day.

ABBEY CT

1700
1700
1703
1703

ABERDEEN LN

1305
1313
1321
1321

View 4 Replies View Related

VBA Formula; Sum Up Part Of A Column Based On A Date Range

Feb 24, 2009

I am trying to write a formula with some variables passed into it. i want to sum up part of a column based on a date range (i've got the range already).

View 3 Replies View Related

Clear Contents In Specific Cell And Cells In Next 2 Columns To Right?

Jul 3, 2014

I am currently using this Code to search column1 for a Key Word that is entered into textbox "Kunde" on my userform.

[Code] .....

What i would really like to be Abel to do is :

Search for the cell in column1 with =Kunde.Value

Clearcontents of this cell and the 2 adjacent to the right.

i.e. Word is found in A7

Cells A7:C7 contents are cleared and fill Color returned to default colorindex 0

View 3 Replies View Related

Search Across Columns By Row & Replace Specific Cell Contents

May 2, 2008

I have created a desk planning spreadsheet in excel. Each week a mailmerge sends out an email to everyone in the office asking them to confirm when they will need a desk in the next week.

As the normal employee doesnt get involved in desk planning I want them simply to state whether they will be in the building or not by entering "GH" (our building) in a cell under each day in the email they get sent.

When the reply comes in we select the cells from the email and then paste them into the desk planning spreadsheet.
-----

WHAT I NEED TO DO:
Select some cells (must be in the same row - that we have just pasted in).
Press a button on the Worksheet labelled "Auto Assign Desk", which does this:-
For each cell that contains "GH", replace with the right-most cell to the left of the selection that starts "GH_"... (this is the start of a unique desk reference (GH_1_1, GH_1_2,etc.)
-----

This will assign the employee to the desk they were sat at last, when they are in the office next week.

View 7 Replies View Related

Filter Sheet Based On Certain Digits In A Column Of Part Numbers

Jul 16, 2009

I am trying to filter my excel sheet based on certain digits in a column of part numbers. The part number has 10 characters. I would like to filter it so that all part numbers where the 4th character is the number 5 or 7 is listed and where the 5th character is a zero. (i.e. R4X5831310 is a part number where 5 is the 4th character; I would like the filter to show this part number)

View 2 Replies View Related

Multiple Lookup: List Of Part Numbers Based On The Product Part Code

Feb 12, 2009

I'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.

=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})

so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.

View 3 Replies View Related

Excel 2010 :: Cell Insert In One Column To Insert In Other Columns?

Mar 23, 2012

I have a master data sheet with four columns, A, B, C and D

Column A has the primary data and B,C,D has dependent data values;

So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;

View 2 Replies View Related

Dividing Output Of Sumproduct Formula By Count Of Specific Cell Contents

Aug 21, 2009

I've got the following sumproduct formula (which seems to work):

=SUMPRODUCT(--(ISNUMBER(SEARCH($B17,Product_Keywords))),--(YEAR(Invoice_Date)=H$3),--(ROUNDUP(MONTH(Invoice_Date)/3,0)=H$4),--(Invoiced_Amount))

B17 is a keyword to be found in the Product_Keywords range

I'd like to modify it so that:

ifthe cell in the range Product_Keywords also includes "," thendivide the sumproduct by the number of commas+1

Presumably I could add --(ISNUMBER(SEARCH(",",Product_Keywords) as one of the conditions,
but how would I keep track of the number of commas in the cell?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved