Highlight And Delete Lower Value Of A Subset Of Cells?
Apr 30, 2014
I have a huge list of data with numbers in cells. each number also has a corresponding percentage in the next cell over. In some cases, some of the numbers appear twice with differentiating percentages in the cells. What I am trying to do is automatically highlight and delete the duplicate number with the lower of the two percentages. See the below example.
2069091%
2069088%
As per above, I would want to delete the duplicate number with the 88% since it is the lower of the two percentages of that number. I have almost 2000 cells and have been going through manually deleting the lower of the two percentages for the duplicate numbers.
View 6 Replies
ADVERTISEMENT
Sep 30, 2013
create a formula copying a formula from cell a5 to a20 but i want the result to be 1 cell lower from a5's result
View 6 Replies
View Related
Oct 27, 2009
I M trying to get the lower values between to cells and have the lower valued cell highlighted,,,i have over 43 thousand lines of data to go throughand i was wondering if there was a quicker way to do this,,,for example cellA1 is $4.25 and cellA2 is $5.25 i want cell A1 to be highlighted,,is there a way?
View 2 Replies
View Related
May 20, 2008
I am trying to detete rows that have several specific values, upper and lower case, (A-H) in any of several columns (B through H). I can delete upper and lower case "D"s in column B, but I'm having difficulty stringing together several variations and getting at the "D"s that are midstream (such as: ADeC), I tried ("*D*") to no avail.
With . Cells(Lrow, "B")
If Not IsError(.Value) Then
'****
If LCase(.Value) = LCase("D") Then .EntireRow.Delete
View 5 Replies
View Related
Nov 21, 2008
I am inserting a subtotal above my data set, the first cell that this subtotal takes place is "R1", then I have an unknown number of subtotals going right, depending on the number of months FCSTed by my sales managers.
Attached you will find a subset of the data and you will see that I need to select "S1 : iLastColumn(1)".
View 4 Replies
View Related
Feb 12, 2013
I would like to compare two cells side by side and populate the higher of the two cells in one color and the lower in another
View 3 Replies
View Related
Sep 10, 2008
I am using the Find fuction to look for values in cells that contain text in both lower and upper case. I am comparing the values that I have stored in a lookup table. I am running into trouble when the lookup table doesn't match the text cells....
View 9 Replies
View Related
Sep 1, 2009
I am looking for a formula that I can use in the lower table to fill in the missing County cells, based on the values in the Town/Zip columns on the top table (I apoligize for the crudeness):
CountyTownZipAbleTownA00000AbleTownB00001AbleTownC00002BravoTownD00003BravoTownE00004CountyTownZipMemberTownD00003BlackTownC00002FrankTownA00000GreeneTownB00001JonesTownA00000SmithTownC00006ThomasTownE00004White
This would consist of hundreds of Zips and Towns and this is just an abbreviated mock up.
View 9 Replies
View Related
Sep 16, 2009
I'm during a spreadsheet for the Local Government and the task is Hard Rubbish Collection. Residents only allow to have their hard rubbish collected twice a year but sometimes, some cheeky residents have their rubbish collected for the third time in a year without us knowing it
This is the code I've found in this forum (thanks to rylo) but it only works on active sheet ...
View 10 Replies
View Related
Mar 16, 2009
Looking for a "oneliner: or CSE perhaps that sums the maximum values for each subset. See example below. The answer should be "9".....
View 9 Replies
View Related
Oct 8, 2008
Is there a data validation that will not allow all upper case or all lower case characters?
For examples:
Allow:
John Doe
101A N Woodbine Street
Disallow:
JOHN DOE
101A N WOODBINE STREET
Disallow:
john doe
101a n woodbine street
Or perhaps formatting that would convert the words to upper/lower case?
Or, I would be interested in VBA if it is the only way.
View 9 Replies
View Related
Oct 8, 2013
I have a sub where I pass in a 1200 row by 8 column named range. Inside the sub I want to create a single column, 1200 row range. I also pass in which column I want to use of the 8 in the big range. So I pass in a number between 1 and 8. I create a new range, but i am not sure how to reference a particular column. I am trying to avoid looping.
View 6 Replies
View Related
Jun 24, 2014
I have a workbook of data that I created a pivot table with. From there I need to rank each value of the NES, column C, within the corresponding Reporting Structure, column A. The table that I created will be update with data on a monthly basis and I don't want to have to redo the rankings every month and just have it refresh.
View 2 Replies
View Related
Feb 18, 2009
I've got a table on a worksheet (daylies) with daily data, dates in A6, A7, A8, ..., various data in columns B, C, D, ... .
Now I would like to make a subset table on a separate worksheet (weeklies) with just weekly snapshots, i.e.,
snapshot from daylies off row 6 on row 2 of weeklies,
snapshot from daylies off row 13 on row 3 of weeklies,
snapshot from daylies off row 20 on row 4 of weeklies etc.
Is this possible or do I have to use the sledge hammer technique of copy and paste?
View 4 Replies
View Related
Jan 20, 2013
I'm facing a problem wherein i have two tables A& B.
Table A has two columns and 40834 records(rows).first column is userid and second column is activeyn with respective values (0 or 1) for each userid
Table B userid column is a subset of Table A and has two columns and 411 records(rows).first columns is userid and second column is activeyn with respective values (0 or 1) for each userid.
Now I want to get activeyn value from table A of all the 411 records(userid's) in Table B.
View 3 Replies
View Related
Jun 12, 2013
I have a list that kind of looks like this. I sorted it by date, then by location, and then by time. I need to find the earliest item in one location on a given day and display as a list.
datelocationtime
6/1/2013 A730
6/1/2013 A745
6/1/2013 A750
6/1/2013 B800
6/1/2013 B810
6/1/2013 C730
6/1/2013 C745
6/1/2013 C800
6/1/2013 C815
6/2/2013 A730
6/2/2013 A745
6/2/2013 A800
6/2/2013 A815
6/2/2013 B700
6/2/2013 B800
6/2/2013 B815
6/2/2013 C800
6/2/2013 C815
View 10 Replies
View Related
Nov 4, 2008
I am trying to e-mail a portion of a spreadsheet that I have. My approach is the following: I save a copy in a temporary folder, open that copy, remove all the sheets that I don't need to send out, save it (same name as the e-mail subject), and then e-mail as an attachment.
The current approach does not remove the macros and references though. I use the following to remove the macros and references:
View 3 Replies
View Related
Jul 8, 2009
I have a set of data that can be divided into sub-sets. I've attached the sheet of data. There are 5 sub-sets and each of these has 5 sub-sets. The sets are defined by the Portfolio and End columns.
So, the 25 sub-sets look like:
10 INTL
20 INTL
30 INTL
40 INTL
50 INTL
10 LCG
20 LCG
30 LCG
...
I'm wondering if there is a way to write a formula in cell N10 that basically pulls in '10' and 'INTL' and finds the correlation on only that sub-set of data. So I guess I want a formula that returns a range such that =correl(Range1, Range2) will work. Also, the length of the ranges will vary, so trying to write an INDIRECT(ADDRESS... will not work. I tried an array-formula in cell N10, but it didn't work. I also included my expected output. in M18:O24.
I know I can do this in other ways, but I really want to learn if there is a way I can do this with 1 formula that I can just drag down. I guess its more of a learning opportunity than something that needs to get done.
View 4 Replies
View Related
Jan 24, 2007
I've got a list of employees with their division and a bunch of other data in each row. I want to copy each and every row to another sheet based on the division.
_______________________________
ID | Name | Division | Other
4 | Joe | South | up
5 | James | South | over
8 | Jim | North | down
9 | John | East | left
14 | Jerry | East | right
Assuming "ID" is A1 and the list is sorted by Division, I need some code to accomplish my goal. I know C/C++ so I understand the principles of programming but I'm just learning the VBA syntax. First thought is to loop through each row moving them individually but then I have to worry about putting it in an open row on the other sheet. Then I thought about finding the first row that contains the target division and, since the data is sorted by division, select each subsequent row and copy the entire selection at once to avoid fumbling around in the destination sheet. Hopefully someone out there can make sense of this and help out. Please let me know if I need to elaborate.
View 9 Replies
View Related
Feb 9, 2014
I'm trying to insert two rows in a subset of worksheets in a workbook by defining a range in a worksheet and loop through the worksheets in that range, but the code will only run on the active worksheet.
[Code] ..........
How I could get this loop to work?
View 1 Replies
View Related
Oct 21, 2008
I would get the End of day bhavcopy from the exchange which is a .csv file. The first column contains the column heads like name, open price etc. and the first column. Now I have to extract the names and the corresponding column values from this list by referring to a notepad that contains the ticker names to be extracted, place in another workbook and save that file.
View 10 Replies
View Related
Feb 9, 2014
I'm trying to insert two rows in a subset of worksheets in a workbook by defining a range in a worksheet and loop through the worksheets in that range, but the code will only run on the active worksheet.
Sub StatePIPData()
Dim sheet_name As Range
For Each sheet_name In Sheets("WS").Range("A:A")
If sheet_name.Value = "" Then
[Code] .......
View 1 Replies
View Related
Mar 25, 2014
Can I use MATCH to match a subset of characters?
Example....Looking for value in a range that matches cell A1 (which reads 'DOGS')
MATCH(A1,'SEARCH_SHEET'!H4:H2590, FALSE)
This will look for a cell with 'DOGS' in it.
But what if I want a positive match on a cell that has 'DOGS & CATS'
This fails because it doesn't match exactly.
View 9 Replies
View Related
Aug 29, 2008
I have a set of 20 numbers that I regularly wish to select 6 numbers from, without duplicates
View 9 Replies
View Related
Dec 19, 2008
I have a sheet of data that is imported from an external database. Depending on which report gets imported, the column count and column location will vary. However, the headers for the columns I need to work with are constant, therefore I create a named range for all columns, and reference the ranges as I work with the data and avoid hard-coded cell references. Therefore, the ranges are one cell wide, with up to 2000+ rows.
Here's my problem. I need to reference a sub-set of a named range, to get the min of the subset. I've searched this board and others, but can't find an example of this method. The code is within a loop, and the range subset location is determined by a count on another named range.
The data involves Tasks and Subtasks. Each task can have multiple subtasks, and each subtask has it's own start and end dates. I'm trying to determine the earliest start date and the latest end date for each individual Task so I can determine the total duration for the Task.
Here's the code that determines the cell range. This code is working.
d2 = WorksheetFunction.CountIf(Range("ASR"), Range("ASR").Cells(y, 1).Value) ' count number of tasks in this ASR, store in d2
The code that I can't figure out is below. The compiler can't figure out what I'm trying to do. (Neither can I!!)
d3 = WorksheetFunction.Min("Planned_Start_Date").Cells(y, 1), Cells(y + d2 - 1, 1).Value) ' Get the min Planned Start Date for this ASR
In english: Look in the Planned_Start_Date named range, and more specifically a certain subset of that range, and return the minimum date found.
I've tried several ways, none of which will compile. I realize the above code is way off; I include it to show how lost I really am!
Slightly off-topic: I'm fairly new to VBA, and am expected to create executive dashboards with the data. I've purchased Excel 2003 Power Programming with VBA and Excel Charts (both Walkenbach); Excel Programming 2nd Edition; Excel Edition of Using Visual Basic for Applications; and Dashboard Reporting with Excel, Kyd. These are all useful books, but I think they expect me to have a better understanding than I have.
View 9 Replies
View Related
Oct 17, 2006
I need a piece of VBA code to assign to an Excel form that determines the maximum value of a subset of one column whose cognate rows in an adjoining column satisfy a particular value.
View 2 Replies
View Related
Aug 13, 2009
1. I want to highlight cells on a form so that a user knows which cells to fill out.
2. When they print the form I do not want the cell shading to print.
View 2 Replies
View Related
Sep 27, 2006
I am trying to write a macro which highlights all the cells with any reference to other cell. The macro should highlight a cell with formula like = 3 * A25 but not highlight a cell with following formula. = 3 * 0.4535566. 'Hasformula' property is not useful here as it can't distinguish between above examples.
View 3 Replies
View Related
Feb 16, 2010
I've got four tables with negative and positive values and want to determine the largest magnitude of a subset of four values within those four tables. In other words if the largest magnitude is negative I want the negative value of the four subsets or vise-versa.
I've tried the following but got an error stating it was too long:
= IF(ABS(VLOOKUP(table1)) = MAX(ABS(VLOOKUP(table1)), ABS(VLOOKUP(table2)), ABS(VLOOKUP(table3)), ABS(VLOOKUP(table4))), VLOOKUP(table1), IF(ABS(VLOOKUP(table2)) = MAX(ABS(VLOOKUP(table1)), ABS(VLOOKUP(table2)), ABS(VLOOKUP(table3)), ABS(VLOOKUP(table4))), VLOOKUP(table2), IF(ABS(VLOOKUP(table3)) = MAX(ABS(VLOOKUP(table1)), ABS(VLOOKUP(table2)), ABS(VLOOKUP(table3)), ABS(VLOOKUP(table4))), VLOOKUP(table3), VLOOKUP(table4))))
The repeating line needs attention in my mind:
MAX(ABS(VLOOKUP(table1)), ABS(VLOOKUP(table2)), ABS(VLOOKUP(table3)), ABS(VLOOKUP(table4)))
View 6 Replies
View Related
Apr 10, 2009
So what I have is a large list of items, and each item has the price of the product, and a product type.
What I want to do is find the median price for each specific product type, using a formula, without having to sort or filter my large list of products.
View 6 Replies
View Related
