Copy Subset To Different Sheet
Jan 24, 2007
I've got a list of employees with their division and a bunch of other data in each row. I want to copy each and every row to another sheet based on the division.
_______________________________
ID | Name | Division | Other
4 | Joe | South | up
5 | James | South | over
8 | Jim | North | down
9 | John | East | left
14 | Jerry | East | right
Assuming "ID" is A1 and the list is sorted by Division, I need some code to accomplish my goal. I know C/C++ so I understand the principles of programming but I'm just learning the VBA syntax. First thought is to loop through each row moving them individually but then I have to worry about putting it in an open row on the other sheet. Then I thought about finding the first row that contains the target division and, since the data is sorted by division, select each subsequent row and copy the entire selection at once to avoid fumbling around in the destination sheet. Hopefully someone out there can make sense of this and help out. Please let me know if I need to elaborate.
View 9 Replies
ADVERTISEMENT
Mar 16, 2009
Looking for a "oneliner: or CSE perhaps that sums the maximum values for each subset. See example below. The answer should be "9".....
View 9 Replies
View Related
Oct 8, 2013
I have a sub where I pass in a 1200 row by 8 column named range. Inside the sub I want to create a single column, 1200 row range. I also pass in which column I want to use of the 8 in the big range. So I pass in a number between 1 and 8. I create a new range, but i am not sure how to reference a particular column. I am trying to avoid looping.
View 6 Replies
View Related
Jun 24, 2014
I have a workbook of data that I created a pivot table with. From there I need to rank each value of the NES, column C, within the corresponding Reporting Structure, column A. The table that I created will be update with data on a monthly basis and I don't want to have to redo the rankings every month and just have it refresh.
View 2 Replies
View Related
Feb 18, 2009
I've got a table on a worksheet (daylies) with daily data, dates in A6, A7, A8, ..., various data in columns B, C, D, ... .
Now I would like to make a subset table on a separate worksheet (weeklies) with just weekly snapshots, i.e.,
snapshot from daylies off row 6 on row 2 of weeklies,
snapshot from daylies off row 13 on row 3 of weeklies,
snapshot from daylies off row 20 on row 4 of weeklies etc.
Is this possible or do I have to use the sledge hammer technique of copy and paste?
View 4 Replies
View Related
Jan 20, 2013
I'm facing a problem wherein i have two tables A& B.
Table A has two columns and 40834 records(rows).first column is userid and second column is activeyn with respective values (0 or 1) for each userid
Table B userid column is a subset of Table A and has two columns and 411 records(rows).first columns is userid and second column is activeyn with respective values (0 or 1) for each userid.
Now I want to get activeyn value from table A of all the 411 records(userid's) in Table B.
View 3 Replies
View Related
Jun 12, 2013
I have a list that kind of looks like this. I sorted it by date, then by location, and then by time. I need to find the earliest item in one location on a given day and display as a list.
datelocationtime
6/1/2013 A730
6/1/2013 A745
6/1/2013 A750
6/1/2013 B800
6/1/2013 B810
6/1/2013 C730
6/1/2013 C745
6/1/2013 C800
6/1/2013 C815
6/2/2013 A730
6/2/2013 A745
6/2/2013 A800
6/2/2013 A815
6/2/2013 B700
6/2/2013 B800
6/2/2013 B815
6/2/2013 C800
6/2/2013 C815
View 10 Replies
View Related
Nov 4, 2008
I am trying to e-mail a portion of a spreadsheet that I have. My approach is the following: I save a copy in a temporary folder, open that copy, remove all the sheets that I don't need to send out, save it (same name as the e-mail subject), and then e-mail as an attachment.
The current approach does not remove the macros and references though. I use the following to remove the macros and references:
View 3 Replies
View Related
Jul 8, 2009
I have a set of data that can be divided into sub-sets. I've attached the sheet of data. There are 5 sub-sets and each of these has 5 sub-sets. The sets are defined by the Portfolio and End columns.
So, the 25 sub-sets look like:
10 INTL
20 INTL
30 INTL
40 INTL
50 INTL
10 LCG
20 LCG
30 LCG
...
I'm wondering if there is a way to write a formula in cell N10 that basically pulls in '10' and 'INTL' and finds the correlation on only that sub-set of data. So I guess I want a formula that returns a range such that =correl(Range1, Range2) will work. Also, the length of the ranges will vary, so trying to write an INDIRECT(ADDRESS... will not work. I tried an array-formula in cell N10, but it didn't work. I also included my expected output. in M18:O24.
I know I can do this in other ways, but I really want to learn if there is a way I can do this with 1 formula that I can just drag down. I guess its more of a learning opportunity than something that needs to get done.
View 4 Replies
View Related
Feb 9, 2014
I'm trying to insert two rows in a subset of worksheets in a workbook by defining a range in a worksheet and loop through the worksheets in that range, but the code will only run on the active worksheet.
[Code] ..........
How I could get this loop to work?
View 1 Replies
View Related
Oct 21, 2008
I would get the End of day bhavcopy from the exchange which is a .csv file. The first column contains the column heads like name, open price etc. and the first column. Now I have to extract the names and the corresponding column values from this list by referring to a notepad that contains the ticker names to be extracted, place in another workbook and save that file.
View 10 Replies
View Related
Feb 9, 2014
I'm trying to insert two rows in a subset of worksheets in a workbook by defining a range in a worksheet and loop through the worksheets in that range, but the code will only run on the active worksheet.
Sub StatePIPData()
Dim sheet_name As Range
For Each sheet_name In Sheets("WS").Range("A:A")
If sheet_name.Value = "" Then
[Code] .......
View 1 Replies
View Related
Mar 25, 2014
Can I use MATCH to match a subset of characters?
Example....Looking for value in a range that matches cell A1 (which reads 'DOGS')
MATCH(A1,'SEARCH_SHEET'!H4:H2590, FALSE)
This will look for a cell with 'DOGS' in it.
But what if I want a positive match on a cell that has 'DOGS & CATS'
This fails because it doesn't match exactly.
View 9 Replies
View Related
Aug 29, 2008
I have a set of 20 numbers that I regularly wish to select 6 numbers from, without duplicates
View 9 Replies
View Related
Dec 19, 2008
I have a sheet of data that is imported from an external database. Depending on which report gets imported, the column count and column location will vary. However, the headers for the columns I need to work with are constant, therefore I create a named range for all columns, and reference the ranges as I work with the data and avoid hard-coded cell references. Therefore, the ranges are one cell wide, with up to 2000+ rows.
Here's my problem. I need to reference a sub-set of a named range, to get the min of the subset. I've searched this board and others, but can't find an example of this method. The code is within a loop, and the range subset location is determined by a count on another named range.
The data involves Tasks and Subtasks. Each task can have multiple subtasks, and each subtask has it's own start and end dates. I'm trying to determine the earliest start date and the latest end date for each individual Task so I can determine the total duration for the Task.
Here's the code that determines the cell range. This code is working.
d2 = WorksheetFunction.CountIf(Range("ASR"), Range("ASR").Cells(y, 1).Value) ' count number of tasks in this ASR, store in d2
The code that I can't figure out is below. The compiler can't figure out what I'm trying to do. (Neither can I!!)
d3 = WorksheetFunction.Min("Planned_Start_Date").Cells(y, 1), Cells(y + d2 - 1, 1).Value) ' Get the min Planned Start Date for this ASR
In english: Look in the Planned_Start_Date named range, and more specifically a certain subset of that range, and return the minimum date found.
I've tried several ways, none of which will compile. I realize the above code is way off; I include it to show how lost I really am!
Slightly off-topic: I'm fairly new to VBA, and am expected to create executive dashboards with the data. I've purchased Excel 2003 Power Programming with VBA and Excel Charts (both Walkenbach); Excel Programming 2nd Edition; Excel Edition of Using Visual Basic for Applications; and Dashboard Reporting with Excel, Kyd. These are all useful books, but I think they expect me to have a better understanding than I have.
View 9 Replies
View Related
Oct 17, 2006
I need a piece of VBA code to assign to an Excel form that determines the maximum value of a subset of one column whose cognate rows in an adjoining column satisfy a particular value.
View 2 Replies
View Related
Apr 30, 2014
I have a huge list of data with numbers in cells. each number also has a corresponding percentage in the next cell over. In some cases, some of the numbers appear twice with differentiating percentages in the cells. What I am trying to do is automatically highlight and delete the duplicate number with the lower of the two percentages. See the below example.
2069091%
2069088%
As per above, I would want to delete the duplicate number with the 88% since it is the lower of the two percentages of that number. I have almost 2000 cells and have been going through manually deleting the lower of the two percentages for the duplicate numbers.
View 6 Replies
View Related
Feb 16, 2010
I've got four tables with negative and positive values and want to determine the largest magnitude of a subset of four values within those four tables. In other words if the largest magnitude is negative I want the negative value of the four subsets or vise-versa.
I've tried the following but got an error stating it was too long:
= IF(ABS(VLOOKUP(table1)) = MAX(ABS(VLOOKUP(table1)), ABS(VLOOKUP(table2)), ABS(VLOOKUP(table3)), ABS(VLOOKUP(table4))), VLOOKUP(table1), IF(ABS(VLOOKUP(table2)) = MAX(ABS(VLOOKUP(table1)), ABS(VLOOKUP(table2)), ABS(VLOOKUP(table3)), ABS(VLOOKUP(table4))), VLOOKUP(table2), IF(ABS(VLOOKUP(table3)) = MAX(ABS(VLOOKUP(table1)), ABS(VLOOKUP(table2)), ABS(VLOOKUP(table3)), ABS(VLOOKUP(table4))), VLOOKUP(table3), VLOOKUP(table4))))
The repeating line needs attention in my mind:
MAX(ABS(VLOOKUP(table1)), ABS(VLOOKUP(table2)), ABS(VLOOKUP(table3)), ABS(VLOOKUP(table4)))
View 6 Replies
View Related
Apr 10, 2009
So what I have is a large list of items, and each item has the price of the product, and a product type.
What I want to do is find the median price for each specific product type, using a formula, without having to sort or filter my large list of products.
View 6 Replies
View Related
Jun 2, 2006
I will do my best to explain but just in case I have attached a worksheet to make things easier. I have a list of a few thousand products with data on each product. When I run through a series of cuts, I get a subset list and want to be able to calculated a weighted average by somehow saying to do a weighted average (and/or count, and/or average, etc.) on the characteristics of only the products in the subset.
View 9 Replies
View Related
Oct 27, 2013
I am limiting choices in a certain cell to a list via data validation (using data validation, allow - list and pointing to the source). I want to limit the next set of choices in the next column (in this example in Column C) for the user based on the choice made in the adjoining cell. For example to keep it simple I will use the following: if the user selected "Fruit" in B1, then the options in C1 would only show "Oranges","Apples", "Pears". If however the user selected "Veg" it would only show "Cucumber", "Lettuce", "Spinach", "Radishes" in the drop down in column C. I can put a prefix in front of the column C data validation list if that is needed to narrow down e.g. FR-oranges, FR-apples etc.
A B C
1 Fruit Oranges
2 Veg Lettuce
3
Data Validation source for Column B (H2:H4)
Fruit
Veg
Nuts
Data Validation for Column C: (I2:I10)
Oranges
Apples
Pears
Cucumber
Lettuce
Spinach
Radishes
Almonds
Peanuts
View 3 Replies
View Related
Dec 24, 2013
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
View 4 Replies
View Related
Apr 18, 2009
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
View 8 Replies
View Related
Jan 12, 2010
I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February?
Also rename the new sheet (February) cell B3 the same as new sheet's name (February)
So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.
View 9 Replies
View Related
Mar 30, 2014
Example, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
View 2 Replies
View Related
Feb 26, 2009
I have I workbook that contains 2 sheets. The first sheet "Business Objects" is the master list. The second sheet "Gene" contains similar data but is incomplete. There is a unique identifer for both sheets and that is item ID. what I would like to do is look at the Item ID column on sheet1 compare it to SS# on sheet two and copy any rows from sheet1 to the end of the sheet in sheet 2. I have found in my searches on this forum a bit of code that identifies the ones in sheet1 that are not in Sheet2 and highlights them red(which is not neccessary for me, but I am struggling to figure out how to take that and paste it to sheet2.
View 3 Replies
View Related
Oct 27, 2008
EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
View 9 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Jan 15, 2009
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
View 13 Replies
View Related
Nov 22, 2009
I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code
View 11 Replies
View Related