I would like to be able to copy the values of certain cells to another worksheet if a certain condition is met. In return - I would also like to delete the information that was copy to the new worksheet if the condition has changed.
I realize I can just filter out the data to get the information that I need but, I am creating this spreadsheet for several sales people to use and some are not to diverse on excel.
This is also in sheet1 module ( It cuts the respected row and pastes in sheet2 when date/time is populated in column 14 by double clicking).
[Code]....
I'm creating a workbook to keep track of my utilities payments, one sheet for one utility and so on. I like to copy two cells from each sheet to another one to keep me updated of the amount to pay and the date. an example: column A with text, if text "NEXT" appear in column A, copy the value of two cells (at columns B & C) at the right of "NEXT" to another worksheet, if that possible? Below is a photo as an example:
excel.jpg
Currently I have it setup to copy rows to a sheet "Report" based on a single cell value. But now I need the same thing but have it copy the rows based on 2 cells values to sheet "Report". So for example I wanted to copy and paste each row in my workbook that contain values in Columns N:N that contain the value "Test" and in columns AB:AB that contain "1".
Sub copyagain()
Application.ScreenUpdating = False
Dim sh As Worksheet, findThis As String, fAdr As String, fLoc As Range
findThis = "1"
[Code]....
I am trying find a match from multple "text" values.
The values I'm using are flight numbers from sheet "Indiv case" in column (range H2:H51). The flight number could occur multiple time in the column.
The associated flight number sheet "Code & categories" in column (range H2:H257) are associated with the last port of embarkation (range I2:I257) in "Code & categories" sheet.
I need to copy & past the name of the Last port of embarkation from sheet "Code & categories" into sheet "Indiv case" adjcent to the flight numbers in column (I2:I51).
Example: Sheet "Indiv case" from Column (H2:H51) Fligh number Data: UA863, VA4148, EK432, BA15, BA15, VA98, QF8, AC33 etc Using these value from "Indiv case" from Column (H2:H51) search and match valuse in "Code & categories" in column (range H2:H257)
If match found copy valuse from sheet "Code & categories in column (i2:I257) in to sheet "Indiv case" into column (I2:I51) Last port of embarkation".
H2;H257, I2:I257
Flight, Last Post
3k111, Singapore
3k131, Singapore
AC33, Vancouver
Copy and Past "Last Port" into sheet "Indiv case (I2:I51) adjcent to matching flight code.
I'm trying to copy the cells from a sheet and transfer only the values to other sheet.
I did it via code and it worked fine, except for the dates. In the new sheet the months and days are swapped.
The original date is composed via the concatenate function, since it gets inputs (day, month and year) from the user in different cells. It's in the format D/M/YYYY (examples: 4/2/2014, 10/12/2013). I believe the excel interprets it as Text, even if I formated the cells to Date.
I think it may have something to do with the default format in different countries. Here in Brazil we use DD/MM/YYYY, but my Excel is in english and in US the format is MM/DD/YYYY, am I right?
I want to copy (values only) from A5:A548 (sheet 1) to C7:C550 (sheet 2). However it cant be done by record macro.I think it can be done with correct VBA code.
View 4 Replies View RelatedI have basic values in sheet named 'Basic"
i have aggregate values in sheet named "Aggregate"
The values shown in B5:D5 in sheet basic is an outcome of a formula.I want this values to be copied to E3:G3 in sheet named aggregate.
likewise the values shown in B11:D11 in sheet Basic to be copied to E4:G4 in sheet aggregate.
i can do this manually by copy and paste special-values.
But is there any way to done it automatically by excel?
I have a huge list that i need to copy over to another workbook but have a problem. the data i have is stored on 2 separate columns, A & B. I need both values to be combined into one cell and separated by a '/'. The CONCATENATE functi0n works perfectly, but when i copy these values across to the other sheet, of course i loose these becasue the original look up values for concatenation are elsewhere. How can i copy these concatenated values across to my other sheet?
View 5 Replies View RelatedI have this code:
[Code] .....
I want only values to be copied, not formulas.
I'm getting better with Excel and have gotten pretty good with formulas, but my VB/Macro understanding is limited, if not non-existent!
What I need is to assign a macro to a button so that when executed, it copies the entire sheet and pastes all as values.
a code that will allow me to copy values from one sheet and adjancently paste them into another sheet?
I would like to have theses values be pasted right under the next available blank line.
Specifically, I would like a code that will select a particular range and pasteonly the cells with values to the Sheet1 on the next available blank line. And select another range and adjacently paste only the cells with values to the Sheet1 on the next available line, and so on.
in my original sheet, I have lots of formulas. I'd like to create a new sheet that uses the same values from my original sheet.
View 2 Replies View RelatedI am trying to copy unique records from one sheet (timliness_etcc) G column to another sheet analysis starting from column A row 29
Sub Test()
Dim Sh1 As Worksheet
Dim Rng As Range
Dim Sh2 As Worksheet
Set Sh1 = Worksheets("Timliness_NAV_details")
Set Rng = Sh1.Range("G1:G" & Sh1.Range("G65536").End(xlUp).Row)
Set Sh2 = Worksheets("Analysis")
Rng.Cells(1, 7).Copy Sh2.Cells(29, 1)
Rng.AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Sh2.Range("A29"), Unique:=True
End Sub
I'm trying to copy only values (not formulas) of the last sheet and name the new sheet "Games". I'm using this:
Code:
Sub CreateColumn()ActiveSheet.CopyCells.CopyRange("A1").PasteSpecial Paste:=xlPasteValuesApplication.CutCopyMode = False ActiveSheet.Name = "Games" Application.ScreenUpdating = FalseEnd Sub
But it's creating a new Workbook (file), not a new sheet after the last one. Plus, the last sheet is not the one active all the time..
I need VBA to copy the values from a treadline output box on a chart to a new sheet. The macro recorder produces the code below, but I need to make the 5th line generic so that the code will apply to any workbook. The code below will not run without the "Windows("Test.xls").Activate" statement, which restricts the code to a workbook of a specifc name (Test.xls). How can I make this run for any workbook name?
Sub CopyTreadlineData()
Sheets("A").Select
ActiveSheet.ChartObjects("Chart 1").Activate
ActiveChart.SeriesCollection(1).Trendlines(1).DataLabel.Select
ActiveWindow.Visible = False
Windows("Test.xls").Activate
Sheets("Beta").Select
Range("B15").Select
ActiveSheet.Paste
End Sub
I have a userform that I use to add a new record to a csv sheet.
In my workbook I have a table with the same format that my userForm has. What I am looking to do is copy the values from my lookup table on my sample sheet and past them in my add userform in the correct corresponding cells. I have been trying to make the code work for some time now with no luck.
workbook sample.zip
I have a commissions workbook with about 20-30 sheets. In A1 of every sheet is a Name and in column G is a bunch of Numerical Values. I want to create a "Grand Total" sheet where I have the Name and the Values corresponding from each of the sheets onto my final one.
View 3 Replies View RelatedI am trying to make some sheets with football teams from one championship and their results. For example i will have a match between TeamA vs. TeamB that will end 0-0. I will enter this value in the sheet for the TeamA results but normally this value will also be found in the results sheet of TeamB.
My question is, how can i make excel copy this value once i enter it for TeamA in the results sheet for TeamB.
I am looking for a macro that will copy a worksheet to a new workbook and 'paste as values only' - this is because I already have a macro that I am trying to use to 'autofilter' the sheet to only show rows and colums that have entries in them. Since the sheet is dynamic, the macro will not work unless I copy and paste as values only...
Workbook attached - FYI, the 2 sheets in the workbook are actually in 2 separate books, I have just put them together to make it easier to post here...
I'm looking for some guidance on a particular popup box that I am getting when I try to run the code below.
View 2 Replies View RelatedI have a workbook with 8 tabs and one master tab. The 8 tabs are where the user enters information and the master sheet contains all employees from the 8 tabs. All tabs, including the master, have the same columns in the same order. How can I automatically have the information populate to the master tab as information is changed on the tab groups? I had a vlookup on the master sheet going through all of the sheets however it slowed my report down tremendously and caused too much lag.
View 2 Replies View Related write a script to match a cell value then copy and paste the matching row across two worksheets - "Master List" and "Demographics".
These two worksheets have the same cell values in Column A, the key difference is the Column A cell order in the second worksheet "Demographics". This Column A cell order is set arbitrarily by another system and will vary over time.
I would like to match the rows, then paste the three columns from the second worksheet into the first worksheet.
For example:
"Demographics" Worksheet Cell A2 = "Master List" Worksheet A45 - then copy cells A2, B2 and C2 and paste into A45, B45, C45 respectively.
"Demographics" Worksheet Cell A49 = "Master List" Worksheet A12 - then copy cells A49, B49 and C49 and paste into A12, B12, C12 respectively.
I have created a sample spreadsheet here; - List Schema.xlsx
I want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.
View 4 Replies View RelatedI have a query about using Array Variables in excel VBA. I have a set of lookup tables and a main data table. The data table will be downloaded everyday. I need to replace the ID's in the main table with actual data from the Lookup tables.
e.g.
Main Data Table
Color Operator
005--325 005
004--326 004
003--327
001--328
002--322
Lookup Color
001 - Red
002 - Blue
003 - Green
004 - Violet
005 - White
Lookup Operator Table
323 - Operator 1
324 - Operator 2
325 - Operator 3
326 - Operator 4
327 - Operator 5
328 - Operator 6
I have a huge amount of data in the main table. So I can't use a lookup formula for automation. Rather I would like to use VBA to create array variables, scan and copy the lookup data into the array and replace the ID's in the main table.
Only that I am unable to achieve this using arrays. I am very basic in executing code related to Arrays.
I am trying to copy the entire row based on values in column A. I have 13237 rows of data. Column A is grouped into about 200 categories with corresponding data in B-F. I would like this to automatically copy the data into new tabs based on the groups in column A. I would also like the tab to be renamed to the value in column A.
M195_-_Subinventory_Item_Locato ABCDEF1LocatorItemSERIAL_NUMBERLOT_NUMBERON_HANDUOM201
.REEF..22700300100 228136EA301.REEF..22643400000 331122EA401
.REEF..K20-745-000 531124EA501.REEF..K20-618-000 531132EA601
.REEF..22747300000 1122111EA701
[Code] .........
I tried to make something to find a certain value (from a userform) in a range, and then copy the line partially to another sheet. Then go forth to the next found item and do the same. But... I cannot seem to make this loop.
With Sheets("Data input").Range("N5:N1100")
Dim FoundRange As Range
Worksheets("Data input").Activate
[Code].....
Purpose:
Build a roster from:
Sheets(Settings).Range("A21").Value (this value is variable)
Problem:
Find that A21 value in Range T2:T100 (each value in the range is unique)
Copy that value to Sheets("Roster") E8
and the next 9 values to
E14
E20
E26
E32
G2
G14
G20
G26
G32
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
I need a macro to start at cell "A1" on sheet1 and then find that same value on sheet 2 in column B. Once it finds that value in sheet 2, the code would copy the row related to "A1" (A1:H1) into the row on sheet 2 with the value matching "A1" from sheet 1. Once it has done this I need it to do the same from A2:A598. I thought this code below was working but it seems to erase a row from sheet 2 if it is not present in sheet 1. I need the macro to only update the row if the information in column A on both sheets is the same. Here is the code I am using
Code:
Sub FindStr()
Dim rFndCell As Range
Dim strData As String
[Code].....
I have attempted to use a table of contents macro and then Hlookups to pull corresponding data from each worksheet, but haven't had success
Issue: Excel workbook contains 50+ worksheets formatted the same, with data located in the same cells. Worksheets are constantly added to the workbook so the formula needs to scan the entire workbook
How the data is organized: Subject headings are as follows: Cell A1 is "Loan ID"; A2 is labeled "Deal Name"; A3 is "Property Name"; A6 is "Loan Amount"; and E4 is "Asset Manager". Cells B1,B2, B3, B6, and F4 contain the corresponding data.
Goal: I would like to automatically pull all of this information onto a summary page (much like a table of contents, but with the subject headings running across the top of the page) and the text data running down the page. I would also like to be able to click on the property name and have it direct me to the corresponding tab<br> <br>
I have attached an example of what I am looking for, see "summary" tab for end result and other tabs as make-up of the data.