I am trying to created a spreadsheet for work where I have created to validation drop down boxes, one each box has been selected i want it to return back with the correct answer in the 3rd column.
below are the 3 colums. i have created a validation for column 1 and 2 but when selected i want the final box to = column 3 ie. >=9, =2
120%
12
>=2
130%
13
>=2
140%
[code].....
I have been struggling with this formula for ages and have finally given up. What I would like to do is to do a lookup on the concatenated values of Province, Department and Initiative No, which has mutiple values in the status of milestone column, and then give the answer based on a condition.
The condition for this example should be, that if the returned status / or statuses of the initiative is all 1, then the value should be 1, if it's all 2, then the value should be 2, and so on.....but if the values returned from the status of the initiative is a combination of 1,2 or 3, then it should give me the answer 2. If 4 is part of the comination of values returned, then the value should be 4.
Zero - 0 should be excluded from the formula as it is part of planned values and not actual.
I have the attached worksheet with clients' names in four columns (A-D). The first names and last names must remain separate. I need one additional column that shows whether a full name (first and last) in C and D also appears in A and B.
Then one more column that shows how many times the name in C and D shows up, but only if it is also in A and B.
I created an UserForm that looks for Student Name his/her Conferenece Date through a VLookup.
The following is my code:
Private Sub cmdFind_Click()
With frmConference
.txtTranslator.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 6, 0)
.txtDate.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 5, 0)
.txtTime.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 4, 0)
End With
End Sub
The txtTranslator and txtTime works correctly, however txtDate give me a number '40850' not a Date?
How can I change this number for the actual Date?
I have data in A column.
I want to Get anser in B Column.
Sheet1 ABC1S.NoCountryCode2E8481234567CroatiaE8483E8351234568SloveniaE835472123456900Ireland725JM123457000LuxembourgJM Excel tables to the web >> Excel Jeanie HTML 4
Answer Based on C Column....
The following formula shoud give an answer of 178. I think I am placing the
parenthesis in the wrong position.
The answer I get is 308669
=(((F22*71449)*0.4)+16147/C22)
Cell-F22 number is 1826
71449 is a constant number
0.4 is a constant number
16147 is a constant number
Cell-C22 is 10.8
How can I get this to read each, (if (and statement) and give the correct answer. And not give me the 1st underlined statement answer in cell D10. If that also equals true.
But if any other cells G11 thru G14 equals OUT. It still will give the 1st statement.
I need the answer to be the only one of them correctly that’s equal true.
I know that the 1st underlined statement = true. Because G15= OUT .....
see the attached 'Example' excel sheet.
I'm not the best at explaining, but I think that the excel sheet is pretty straight forward.
In Sheet2, cells C3 and D3 are manually entered by the user. I am looking for a formula for B3 that will take the information entered into C3 and D3, find the row in Sheet1 in which column C=Sheet2!C3 and column D=Sheet2!D3, and give the unique corresponding result from Sheet 1 for that row in column B .
So, for example,
if C3=A and D3=102, then the result would be 444
if C3=A and D3=104, then the result would be 111
if C3=B and D3=102, then the result would be 111
The combination of C3 and D3 is always unique and will never have more than one possible result in column B of Sheet1.
I am a newbie to Excel. I really appreciate if someone could help me here and this is very urgent as I have a project going on.
I have a cell say B3, which is a dropdown list I created using Data Validation. It only lists down Yes or No.
What I need is when you click on Yes in B3, i need columns C to I to unhide. If answer is No, column C to I should be hidden. By default, the columns will be hidden.
Can you please help? I tried many times but not successful. Appreciate if someone will be able to walk me through details. If you want to see the sample spreadsheet, I can sent it to you by email. I tried Data> Outline group but they are not happy with this.
I have two sets of two columns which contain numbers as text with trailing spaces and I want to concatenate column A and B and concatenate column F and G, and then compare them, and sumif value in column I if they are the same - giving the answer in the same row as the matching data in column A and B.. but in column J.
I’ve seen sum product and haven’t been able to get it to work at all. I have been adding the trim() function in around the column references to see if that would work but am failing…
A = 2000 text
B = 1234 text
F = 2000 trailing spaces, text
G = 1234 trailing spaces, text
I = 10,000
Answer in column J
I want 20001234 = 20001234 = 10,000 for the whole column.
I don't want to change the original data as its externally sourced and used for other links etc.. This would save a few hours a week if i ( more correctly, you ) could get this to work.
I am having a problem in using lookup formula. Unfortunately for some entries it does not give the exact matching pair but one upper. I have attached the excel sheet. Please correct me where is the mistake. More about the sheet:
One column contains the alphabets from a certain language and second column contains corresponding unicodes. I want to search the unicode of a particulat alphabet using "lookup". Cell C4 is the key value. D4 uses lookup to get unicode value
I have a nice little code which imports data from a mastersheet to my input sheet. Though it will only work as long as the mastersheet is static.
I'm trying to match the product code in column A between my mastersheet and my workbook with a input sheet. And then copy the cell value in column D and E of the relevant row.
The messy part is that some of the products are split into sub categories (less than :$$$:, between :$$$: etc) and they dont have any info in column A.
I'm unsure if this is doable. Is it? And if I get permission to edit the mastersheet somewhat.
I tossed in the start of my currect static c/p, thought I don't think I'm keeping it if I get a handle on this match macro issue.
Code:
Dim ws As Worksheet, wb As Workbook, t As Date, wb1 As Workbook, wb2 As Workbook, wbName As String, janei As String, spm As String
Dim fil
Set wb1 = ActiveWorkbook
ChDir ""
[Code] .........
I would like to write a macro that automatically hides columns of data
based on the value of a cell (I2) with a picklist. Cell I2's picklist is
monthly values (formatted as Jan-10 though Dec-10 but real values are
1/1/2010 through 12/1/2010). I have a range that contains work week end date
values (1/8/2010 to 12/31/2010) in L6:BK6. I would like to have the macro
hide columns that are less than date value chosen in I2.....
I have a two different workbooks book 1 and book 2 with some data.
If values of first two columns ( Column A and B) of both workbooks are matching then I want a formula that can return the value of third column (column c) of book 2 in book 1 column c.
example:
Book 1
column A / Column B / Column C
100 / 200 /
Book 2
Column A / Column B / Column C
100 / 200 / 300
now I want a formula that can return in column C of book 1 to display 300.
And the data runs across some 100 rows in both workbooks.
I have 2 columns:
VAL0085597220EXP0000207731
VAL0122473124EXP0000207864
VAL0169412496EXP0000207879
VAL0173317027EXP0000208330
VAL0172476750EXP0000208703
VAL0173317028EXP0000209148
VAL0047743340EXP0000209666
VAL0176241996EXP0000209668
VAL0169594337EXP0014327602
VAL0047743872EXP0014327702
VAL0158185837EXP0014329002
I am trying to match where these are located in another column
Here you can see 4 columns (C, D, E, F)
I would like to compare Column C, D, E, F and If column C = Column E., i would like to show the result from column F to Column d.,
For example:
For column E >> The result in column F is: Port Blair.,
I would like that to be in Column D after a match.
Is there any forumula which will do this.,
I need a formula. Probably Vlookup. I'm having a LOT of trouble trying to figure out how to "phrase" the formula so let me explain what it is I'm trying to do. If a cell in Sheet 1 Column AS and a cell in Sheet 2 Column B match exactly, I want the cell in Sheet 2 Column C that is in the same row as the matched cell in Sheet 2 Column B to be copied into Sheet 1 Column BB in the same row as the matched cell in Sheet 1 Column AS.
For example, if cells in S1 Column AS and S2 Column B both have the name "LOS ANGELES" then "KLAX" will be copied from cell in S2 Column C (in same row as "LOS ANGELES") to S1 Column BB (in same row as "LOS ANGELES").
I would like to amend my macro w/ additional code that will allow me to view the value in column A, if a subject is chosen from list from columns D or E. Choosing a singal subject to view from row2,from column,D or E will cause the value in column A to not be seen if the subject does not correspond with the row the value is located. Is there a way to match values from corresponding/matching column values with the rows with values in columnA? And. allow if match found to display/list the value in the first empty cell in column A for match? I would also like the macro to reverse match for column A.
So if a single value is selected in column A for view, then all rows for which the value pertains to will also be shown, instead of just the single row with the value.
Here's an examplary make of the booklet.
I have an Inventory Workbook were Item codes in Left column and Date in top row. I am using the Vlookup formula Its displays only the first value. If their are repeated dates for the same Item code I want to sumup the value according to the Date for that Item code. find the attached sample file
I need to update the vlookup formula in the output, so that it takes the values accordingly and sumup.
I am not sure if I have explained this clearly; however, you will understand better if you see my attached file with examples of my expected output.
I m trying to match the values based on the Coulumn B
[IMG][URL]....
;base64,iVBORw0KGgoAAAANSUhEUgAABVYAAALYCAIAAAAYRj5jAAAgAElEQVR4nMy9Z1RU+Z73Oy/uWs9aM
/eZmTtzn5nT3doGoNLOu3KmCEXOQUURUcCAomIgmXOgDYCK5JyhcoQiQ5HNWcE2dNt9uo8dTve
ZM3PCfbF3RYJo95m5rs+qVb0bpMoO8P3s7+/3/zvrwYOL5cCB4dnk5bmTm2tnKCeHYDAnZzA7m2AgK2tg
/347/fv29e/b1793bx
[Code]...
I have two workbook, test1 (master file) and the other one is test_10_05_2014 with 100 some of them being updated daily. The last portion of the file "test_10_05_2014" is the date and we have different file on daily basis.
using Indirect function in vlookup should give corresponding value for the particular name. Formula used is giving error,
[VLOOKUP(A2,Indirect(" ' "&E1&" ' !$A$2:$X$1000),6,FALSE)]
I am trying to move info from an unformatted sheet to a sheet ready to import into a program. I need to look at the source sheet and if a column heading matches the heading on the destination sheet I need it to move the entire column to the destination sheet.
View 3 Replies View RelatedHaving a bit of trouble trying to get excel to pick up text in one sheet (sheet 2) and populate cells in another (sheet 1) if the row (row 1) labels and columns (column a) in both sheets match. hope that makes sense? I've tried googling this to no avail, i've also tried index-match however i keep getting errors.
View 3 Replies View RelatedI'd like a formula that'll return the column header by matching a lookup value with a table in the second sheet.
eg: sheet 1
Name
Cell
Region
John
111-2222
[Code] .......
The formula should match the name in A2, John, with value from the table in sheet 2 and return the correct region, this case North.
Copy rows from one Sheet to another based on a separate cell value But specifically, I am trying to copy row values from Columns C through column Z in Worksheet 1 of file POHeader.xlsx to row values Columns N through AK in file POReceiv.xlsx when the (Purchase Order #) values in Column A of each file match.
The reason is behind this is - one file has the unique Purchase Order number as the key without associated parts and the other file has the associated part number as the key with purchase order number attached.
I don't know whether I need to use VBA or if I can just use an index and match function.
I've got 3 pairs of columns and I need to sort through them and align the cells in columns E&F with those in A&B and C&D. The cells I need to match up are the times (columns A, C and E)
Example - convert this:
A...............................B..........C...............................D.........E...............................F......
BID TIME.....................BID.......ASK TIME....................ASK......TRADE TIME................TRADE
30/07/2014 14:21:04.....6.10.....30/07/2014 14:22:37.....6.13.....30/07/2014 14:21:04.....6.13
30/07/2014 14:21:06.....6.11.....30/07/2014 14:22:54.....6.13.....30/07/2014 14:22:37.....6.13
30/07/2014 14:22:37.....6.11.....30/07/2014 14:22:56.....6.13.....30/07/2014 14:22:54.....6.13
30/07/2014 14:22:54.....6.11.....30/07/2014 14:22:56.....6.14.....30/07/2014 14:22:56.....6.13
30/07/2014 14:22:56.....6.11.....30/07/2014 14:22:59.....6.13.....30/07/2014 14:22:59.....6.13
Into this:
BID TIME.....................BID.......ASK TIME....................ASK......TRADE TIME................TRADE
30/07/2014 14:21:04.....6.10.................................................30/07/2014 14:21:04.....6.13
30/07/2014 14:21:06.....6.11........................................................................................
30/07/2014 14:22:37.....6.11.....30/07/2014 14:22:37.....6.13.....30/07/2014 14:22:37.....6.13
30/07/2014 14:22:54.....6.11.....30/07/2014 14:22:54.....6.13.....30/07/2014 14:22:54.....6.13
30/07/2014 14:22:56.....6.11.....30/07/2014 14:22:56.....6.13.....30/07/2014 14:22:56.....6.13
............................................30/07/2014 14:22:56.....6.14............................................
............................................30/07/2014 14:22:59.....6.13.....30/07/2014 14:22:59.....6.13
I don't know VBA so hopefully there's a way of doing this with a basic Excel function.
INDEX($D$19:$D$22,MATCH((LARGE($E$19:$E$22,1)),$E$19:$E$22,0))
I use this formula to give me a "name" associated with the largest number in a list. But I can't get it to work when I use it on a win/loss number such as
"7-1". It won't read it.
I want to tell Excel that, if a cell value is between 1 and 100, to enter one result in another cell. If the value is between 101 and 250, enter another result in that same cell. If the value is between 251 and 500 enter another result in that same cell and so on about another 12 times.
View 5 Replies View RelatedI have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
I have a spreadsheet (Excel 2010). I want to fill categoryid in Sheet One based on values of Skill and State which are part of field in Sheet two.
Sheet One (Has Four Columns and I am looking for filling CategoryID based on Sheet Two
FirstName LastName Skill State CategoryID
John Edward Ballet California
Ed Catalino Tap London
Natasha Curtis Ballet Australia
Shen Watson Modern Kansas
Sheet Two
CategoryID CategoryDescription
1 Dancers/Ballet/United States/Alaska
2 Dancers/Ballet/United States/California
3 Dancers/Ballet/UnitedKingdom/Wales
4 Dancers/Ballet/UnitedKingdom/London
5 Dancers/Tap/United States/Alaska
6 Dancers/Tap/United States/California
7 Dancers/Tap/United Kingdom/Wales
8 Dancers/Tap/United Kingdom/London
9 Dancers/Ballet/Australia
10 Dancers/Modern/United States/Kansas