Here's an array I have that is filled with values that come from a worksheet. I'd like to have it so that once this array is full the code that fills it up (see below) gets skipped on subsequent runs of the subroutine. What's a good way to do this? Seems like when I Dim the Array it gets blanked.
Code:
'Fill Bulb Array with House number (j) and Bulb Wattages
j = 1
Do While j
I've wriiten the following routine :
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
' Unhides all columns prior to saving
ActiveSheet. Unprotect password:="test"
Cells.Select
Selection.EntireColumn.Hidden = False
Range("A1").Select
ActiveSheet.Protect DrawingObjects:=True, Contents:=True, Scenarios:=True, password:="test"
Response = MsgBox("Have you considered all the items on the checklist?", vbYesNo)
If Response = vbYes Then
Go_To_Checkbox
I want the routine to stop without saving (after running Go_To_Checkbox) if the answer to "Have you ticked the checklist checkbox?" is 'No'. I know the 'Stop' function will do it but I just want to exit the routine without saving, rather than the routine stopping and calling up the Visual Basic editor.
I have a Sub test where I think can be setup in an Array or a shorter sub routine, how to shorted this routine. Ths routine was designed to check your Computer and depending if you are one of the selected on will the unprotect the sheet.
View 2 Replies View RelatedThe following code stops at the red line with "Method 'SaveAs' of object '_Workbook' failed.
FF="xlCSV". It works fine if I replace
Code:
FileFormat:=FF
with
Code:
FileFormat:=xlCSV
Code:
Sub SaveIt(FileNm, FF)
Dim FSO As Object, a
Set FSO = CreateObject("Scripting.FileSystemObject")
If FSO.FileExists(FileNm) Then FSO.DeleteFile FileNm
If FSO.FileExists(FileNm) Then
[code]....
I am in the process of re-building a major project due to bugs. In the process, I plan to re-organize my sub-routine grouping within modules. In the source file, I have 18 standard modules, with 10-30 routines in each one.
What I would like is a printout of each routine name and which module it resides in, so I can check off each one as I copy it and paste it into the new file. I see that I can get a psuedo tree-view of my project in th eObject Browser, but can't figure out how to print that.
I have a public array in a module in my spreadsheet. The array is an array of a class type (not integers, strings, etc). When I run the macro that uses the array for processing the first time, everything seems to work properly. However, if I run the macro a second time WITHOUT getting out of Excel and coming back in, it doesn't come back with the proper results. It seems like either the array isn't being cleared out properly between the macro runs, OR that something in the macro is overwriting memory. Is there a way to make sure the array is being cleared out between runs of the macro?
View 9 Replies View RelatedI have a macro that formats an imported report and I have inserted it's code into several other routines I have written.
Since there is always the possiblity of changes occurring, is there a way to refer to this macro in a second (or third or fourth) routine so that if a change has to be made to the original macro, I won't have to change it everywhere?
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
I have used macro to ftped a couple of files to my desktop and save them in a folder but i have problems performing the following.
1) Count the number of files in this directory "C:Summary_Reports_from_VBA". Note that the number of files is not fixed every time.
2) Rename each files to .txt files. (intially files do not have any extension and we do not know the name of the file until it has been ftped over but all files will end with a term "sorts" eg renaming of "xxxsorts" to "xxxsorts.txt")
3) Save each renamed files in an Array such that i can "opentext" each file in an excel worksheet. So if there's multiple files, there will be multiple worksheets.
I haven't used List Boxes much previously but decided to use one in this instance because I wanted the capability to make multiple selections. I used the following in a list box called "ListBox_Analysis_Code":
Private Sub ListBox_Analysis_Code_Change()
Dim iPtr As Integer
Dim sTemp As String
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using Excel 2010.
I need to multiply an array of logical results ( returned as {1,0,0,0,1,0 et.}) with a text array (a reference column) and return the text in the reference column in case the value in the logical array is 1.
View 3 Replies View RelatedHere is what I am trying to do: I have 30 duplicate worksheets that I enter data every 3 months. I have a macro that clears certain fields and copies data from one field to other and I run this macro after selecting each sheet one at a time. How can I create a macro that will run this macro from the 1st sheet through to the 30th sheet in one click. My macro is called Clear_data.
View 12 Replies View RelatedI have a macro file
when I run the macro it activates a sub macro called: Find_Empty_cells_win
when this is run it picks up a empty cell in Column G
When this happens I get a Msgbox prompt and then I click on OK.
After this it continues on to the rest of the code.
How do I completed exit the vba coding right after I click on OK
All I want to do is to stop a routine when I press the Cancel key on the user form that the routine called. I have tried "stop", "quit", "end", "abort", et. al. This seems so simple but I cannot figure out how to do it.
View 7 Replies View RelatedI have an add-in that can run the code below. It works fine, however, I need it to run whether there is just one row of data, or 100 rows of data. I have headers, so the first row of data starts in row 2, and the last no matter what will be in row 100 (so 99 rows of actual data technically). There are usually only 10 rows of actual data as the rest are usally set to blanks with iferror. The code below works, but I need it to run for however many rows of actual data there are.
View 1 Replies View RelatedI've got three workbooks that end users will be using for data entry. The VBA code for the three workbooks is identical.
I'm trying to encapsulate the code into an add-in so I only have one copy of the code that I have to debug/maintain.
Furthermore, I've also encapsulated the code in the add-in into a class. The class isn't really a "usual" object modelling some data; rather, it's a utility class processing Worksheet_Change and Worksheet_Activate events. Hopefully this isn't a really bad idea, rather than keeping the code in standard modules in the add-in.
The application is called "Midas". Here are some code excerpts:
Midas.xlam:
Standard Module:
[Code] ......
Class Module:
[Code] .....
And in the end user workbook:
[Code] .....
The Wbk_SheetChange event handler is triggering, but it's looking for the code in the end user workbook, instead of the class. Is there a way I can change
[Code] .....
to call the private routine "Cases_Changed" (where "Cases" is the sheetname) residing in the class instead of looking for it in the workbook?
I have 2 subs routines in a mod. I have declared the two variables at the top of the sub. However when I call the second sub the variable's are not passed along.
Here is an example script. All in one mod. I have taken out the junk in between to help edit the problem.
I'm looking to pass the same bnumber and dnumber to the secound sub.
How do I have a workbook execute VBA code when I hit 'Enter' anywhere on a specific sheet? I don't need the code to execute when I hit 'Enter' on any of the other sheets in the workbook, just a specific sheet.
View 11 Replies View RelatedI've written a Sub that separates words in a sentence into columns in an excel worksheet and it works perfectly. I can't however convert the convert it to a function procedure. when I do so I receive a Circular referencing problem or upon making necessary corrections to prevent circular referencing, I get the Excel #Value error. Here's the code:
Function TextToColumns(Txt) As String
'
' Enters Text Separated By Spaces Into Columns
'
Dim i As Long
Dim k As Long
Dim cell As Range
[code]......
I currently have a macro that runs every 10 seconds. This macro calls 5 sub-routines.
Code:
Public Sub Copy_Data()
*****code****
*****code****
*****code****
*****code****
Call SortData
Call Create_OutOfStock_File
Call Create_NearEmpty_File
Call Create_InStock_File
Call Create_Other_File
Application.OnTime Now + TimeValue("00:00:10"), "Copy_Data"
End Sub
I need to keep the current code to run Copy_Data every 10 seconds, however, i would like:
Code:
Call Create_OutOfStock_File
Call Create_NearEmpty_File
Call Create_InStock_File
Call Create_Other_File
To be called/run every odd minute, for example, 00:01:00, 00:03:00, 00:05:00
I am writing a lot of code and have separated each section in different modules For example, I have one module titled OpenR2D2 and another titled StoreName
I want the sub in StoreName to run at the end of OpenR2D2 but I get this compile error "expected variable or procedure, not module"
Here's the end of the code where I put it. What have I not thought of?
ThisWorkbook.Activate
Range("B9:G9").PasteSpecial
R2D2data.Activate
Range("B7:G7").Copy 'Sch Actual VLH
ThisWorkbook.Activate
Range("B12:G12").PasteSpecial
Call StoreName
R2D2data.Close Savechanges:=False
Application.ScreenUpdating = True
End Sub
I am trying to develop a routine that will save the file I am currently working on, then save the current tab as a *.csv file with the name equal to cell "C1" in the same directory as the original file. Then I would like it to close the .csv file and reopen the original file all while being generic with the naming so that if the file name and location changes, the script will still work. I recorded a macro to get me started.
View 9 Replies View RelatedI received a great little routine from you guys to a question which was a follows
Can Excel do this?
I have a huge spread sheet - The formulas in each cell reads as follows:
='[1.xls]Community Libraries'!$A$9. I would like to copy the cell all the way down the column, but only 1.xls must change to 2.xls and 3.xls etc. Can Excel copy this way?. I'm using Excel 07 on this pc
The response was:
Sub PutFormula()
For i = 1 To 80
Range("A" & i).Formula = "='[" & i & ".xls]Community Libraries'!$A$9"
Next
End Sub
Can this be modifed to:
A) Start on row 6 and end on row 85 of each Column A to CZ
B) Modify the end bit of the formula as follows Community Libraries'!$A$9&"/10"
I have a useform with about 30 Text boxes for user input.
when the user exits the box I want a validation check routine.
I need to verify 4 things.
1. That the entry is numeric.
2. Thew at the entry is above the minimum.
3. The Entry if below the maximum.
4. Number of decimal places.
Since I have 30 boxes and will be adding more in the future I need a Subroutine.
Here is what I have (I know it does not work - I need help with the syntax.
Code: .....
Userforms Causes Sub Routine To Exit ...
View 9 Replies View RelatedI am trying to complete a toolbar that will lock and unlock all the sheets in a workbook. While I can set the password automatically I'd like to have the macro ask for the password instead of hardcoding it.
Here is the code I currently have and works so long as I have already set the password in the workbook to match what is in the macro
I want to thank you all for the solutions/support I received in completing my (for me) difficult workbook.
I still have a tricky problem. In the example below, can Multibeep "know" when it is being called from Beep versus being excuted directly? And if so can I direct a different sequence?
In my code I am using several variables to create a concatenated string and this is making my code quite lengthy..Now I have manged to use it in the SELECT CASE but it still remains big..
SO I was thinking if it were possible to break it into smaller parts and create a Sub-Routine which can be called in the Main code in the select case for the specific condition this way I can use it in Multiple places without hassles..
find the code which I need passing the variables..
Code:
Sub Condition_I()
Dimm Search_Value as string
Dim INo As Long
Dim Whole_Text As String
Dim Lookup_No1 As String
Dim Lookup_No2 As String
Dim Condition_I_Text As String
Dim WksI As Worksheet
[code].....
I need to pass the Search_Value from the Main Code and also the whole_text back to the Main Code..
How can I edit the following code. If the "Dload" tab is not there the code errors out. How can I make it so that if the "Dload" is not there the macro says "Dload tab missing. Do you want to check file and try again" If the user says yes. then the macro lets the user pick another file. If the user chooses No then does similar quesiton like I have here starting with
OpenA.Activate.
ChDrive "E:"
ChDir "E:2007 WorkAnalytical ReviewBalance Sheet"