Summation And Average Of Consecutive Values That Are Higher That Particular Value
Jan 26, 2014
Objective: I am trying to find consecutive (2 or more) lap time that is above a certain value per lap. Once that is accomplished. I would like to know the summation of these values and the average. These values (summation and average) are not over the entire data, but for the consecutive periods only. Ideally I would like the for n number of laps and lap-time.
(i.e) if threshold is 85 seconds. Please view the attached image and sample spreadsheet.
Lap #Lap TimeThreshold2 or more laps
0118.285118.2
192.7492.74
284.82
387.587.5
486.586.5
582
681
784.2
887
981
The formula I used to get the consecutive data above
formula I used is =IF(AND($B2>$D$2,OR($B3>$D$2,$B1>$D$2)),$B2,""). This yielded the values on the last column.
My question is, how can I sum and find the average and summation of consecutive value till blank cell. Using the example above, I would require the average, ((118.2+92.74)/2) in one cell. I would require the next cell to give me the average, ((87.5+86.5)/2. Also I would require the summations used.
View 2 Replies
ADVERTISEMENT
Jan 26, 2014
Objective: I am trying to find consecutive (2 or more) lap time that is above a certain value per lap. Once that is accomplished. I would like to know the summation of these values and the average. These values (summation and average) are not over the entire data, but for the consecutive periods only. Ideally I would like the for n number of laps and lap-time.
(i.e) if threshold is 85 seconds. Please view the attached image and sample spreadsheet.
Lap #
Lap Time
Threshold
2 or more laps
0
118.2
85
118.2
[Code] ........
The formula I used to get the consecutive data above
formula I used is =IF(AND($B2>$D$2,OR($B3>$D$2,$B1>$D$2)),$B2,""). This yielded the values on the last column.
My question is, how can I sum and find the average and summation of consecutive value till blank cell. Using the example above,
I would require the average, ((118.2+92.74)/2) in one cell. I would require the next cell to give me the average, ((87.5+86.5)/2. Also I would require the summations used.
View 1 Replies
View Related
Dec 4, 2013
1.jpg
I wan to calculate the average for three cells not in Sequence using AVERAGEIF with condition (VALUE >0)
View 5 Replies
View Related
May 17, 2009
In a grade book, if students get a grade on the final exam that is higher than the midterm grade, this becomes the exam portion of their (if it's lower, it's averaged). So a student who gets an 81 on the midterm and a 90 on the final gets a 90 for the exam portion of the final grade. What's the easiest formula to make the final exam grade the average if it's higher than the midterm grade?
Right now the formula I use for the course grade is this:
=SUM(I3*$I$1)+(J3*$J$1)+(K3*$K$1)
where I3/J3/K3 are the midterm/final/quiz averages, and I1/J1/K1 represents the respective % (30/40/30) of the grade assigned to the midterm/final/quizzes.
View 9 Replies
View Related
May 29, 2013
I am trying to do the following.
Monday=0
Tuesday=5
Wednesday=10
Thursday=0
Friday=5
Saturday=0
Sunday=0
Averages
Monday=0
Tuesday=5
Wednesday=7.5
Thursday=0 (I have got a value return of 7.5)
Friday=5
Saturday=0 (I have got a value return of 5)
Sunday=0 (I have got a value return of 5)
I need to work out averages for cells higher than zeros, in other words, I need to ignore those.
Also say I have got an average of 5 by Tuesday and no number yet for the rest of the week, I still get an average of 5 for all days left which I do not want.
I am using excel 2003 and formula =SUM(RANGE)/COUNTIF(RANGE,">=0").
I would also like to hide the annoying #DIV/0! error.
View 9 Replies
View Related
Feb 18, 2008
I have data in 3 different columns (A, C, and E) to name a few. I want to average each of these columns, but if any of them include zero values, I want to exclude that from my calculation.
Example:
Column A = 10
Column B = 0
Column C = 3
Right now, my "average" formula, is showing the average as 4.33. (average a5, b5, c5)
The real average I'm looking for is 6.5. What is the best way to setup my formula?
View 9 Replies
View Related
Jun 30, 2009
Got an equation nightmare on my hands.
So i have 3 columns of data
A: State Abbreviate
B: Benchmark Number
C: New Number
I am trying to get an equation that in column D will return the 2 .....
View 11 Replies
View Related
Jul 1, 2013
Basically, I am looking for a macro code to link to an 'Update' button that will do the following;
I will have 2 sheets, one sheet will be referencing data from other sheet with the following
=IF(Log Sheet!A4="Yes",(A1),"0")
This means, if it needs to be 'referred' it will go to the other sheet, and if it doesn't, then it wont and it will show up as 0.
Basically, every row will have this type of formula for 30 columns, and i would like a macro code that will hide values of 0, but even once hidden, will then show them again if in the other spreadsheet i change the value to yes, meaning i want the previously hidden row to show.
View 1 Replies
View Related
Jan 21, 2010
I have two columns (let's say column A and C), i would like to add the values in column A only if they are higher than the ones in Column C in the same row... how could i do that?
The sheet looks something like this, i would like to add the values in the first column only if they are higher than the ones in the third column and then of course get the sum of them... i would also like to know how many were there in total, but i guess i could do that with a count formula i just need the parameters
$ 67,100.00 $ 110,000.00 $ 165,100.00 $ 146,034.00 $ 239,400.00 $ 220,100.00 $ 90,184.69 $ 147,843.75 $ 168,500.00 $ 51,011.25 $ 83,625.00 $ 95,100.00 $ 89,860.32 $ 147,312.00 $ 198,200.00 $ 159,121.36 $ 260,854.69 $ 26,000.00 $ 129,941.44 $ 213,018.75 $ 235,700.00 $ 88,869.38 $ 145,687.50 $ 95,600.00 $ 27,772.54 $ 45,528.75 $ 43,000.00
View 9 Replies
View Related
May 13, 2013
I have a reference value(say 'X') at L3, now i want to select a value next higher to this value(ie..'X') in the column ''C'' say and also i have to print the corresponding values of the row corresponding to B,C,D,E,F etc.
View 1 Replies
View Related
Feb 1, 2013
Example.xlsI have a list of people with 10 years of salary history for each (in ten consecutive columns on the spreadsheet). I need to calculate in excel the highest 5 consecutive year average salary for each (if they have less than 5 years with salary, then it should just average the years the do have). Some people have breaks in service (for five years, there is a blank in that entry). These years should be ignored and skipped in calculating the avergaes.
View 3 Replies
View Related
Apr 8, 2014
I have two Columns C and E that have dollar amounts in them. I want to compare each row in those columns and then total the number in column C that are higher that column E.
So basically C6>E6, C7<E7, C8=E8,C9>E9 should return the result of 2. There are two instances where the price in C is higher than the price in E.
View 3 Replies
View Related
Jun 12, 2009
This is a logic based macro that needs to compare values in 1 column above a specific cell and take action until the column has no more data. Here's what I'm trying to do (and I've also attached a sample of desired results):
1) I want user to input starting cell. So I need to create a button for that.
2) This is where the logic begins and I'm having difficulty.
From cell defined in button, I move up one cell in that column and compare that value to the original cell.
If the value is greater than original cell then logic needs 2 outcomes:
a) move up 1 cell in column and if that value is less than original cell, then extract that value and copy that value one cell to the right or 1c.
b) move up 1 cell in column and if that value is greater than original cell, then move up again, until find lesser value than original cell. Once we find value less than original cell, extract value and copy value one cell to the right or 1c.
View 2 Replies
View Related
Jul 8, 2009
I have a macro that needs a major improvement in performance. I have a Quad Core 2.67GHz single processor computer and with the current logic it calculates 20 values per minute. I have data sets that can be up to 400,000 data points, which means it will take 333 hours. The attached Sample file has over 9000 point. For this data set it takes 7.5 hours.
The core logic of the macro is to extract what I call “Break Point” into column M and “Time Difference” between the Break Points to column O.
I got the code from this forum (thank you DonkeyOte) and made some modifications. The modified logic does the following:
1) The user inputs the starting cell. In the Sample I use G200.
2) From cell defined in button, It moves down one cell in that column and compares that value to the original cell.
If the value is greater than original cell then there are 2 possible outcomes:
a) move down 1 cell in column and if that value is less than original cell, then extract that value and copy that value to the column M (Break Point value) and copy the Time Difference Value to column O. “Time Difference” is calculated as the difference between the 2 point breaks in Column A. In this case I’ve hardcoded 0.003472222 to get 5 minutes which matches up with each incremental time in column A, but I would like the Macro to automatically calculate that by the difference between Column A values.
b) move down 1 cell in column and if that value is greater than original cell, then move down again, until find lesser value than original cell. Once we find value less than original cell, extract value and copy value to column M and copy the Time Difference Value to column O.
Once lesser value has been copied to new cell, logic is now:
a) move down 1 cell in column and if that value is greater than original cell, then extract that value and copy that value one cell to column M and copy the Time Difference Value to column O.
b) move down 1 cell in column and if that value is less than original cell, then move up again, until find greater value than original cell. Once we find value greater than original cell, extract value and copy value one cell to column M and copy the Time Difference Value to column O.
At any point in the process if we find a value equal to the starting cell, we ignore it and the logic continues. The logic continues flip flopping like this to the last value of column G.
OR
Here's the logic now in reverse I need:
If after moving down 1 cell of original cell, the value is less than original cell then logic has the following 2 outcomes:
a) move down 1 cell in column and if that value is greater than original cell, then extract that value and copy that value one cell to column M and copy the Time Difference Value to column O..
b) move down 1 cell in column and if that value less than original cell, then move up again, until find greater value than original cell. Once we find value greater than original cell, extract value and copy value one cell to column M and copy the Time Difference Value to column O.
Once greater value has been copied to new cell, logic is now:
a) move down 1 cell in column and if that value is less than original cell, then extract that value and copy that value one cell to column M and copy the Time Difference Value to column O.
b) move down 1 cell in column and if that value is greater than original cell, then move up again, until find lesser value than original cell. Once we find value lesser than original cell, extract value and copy value one cell to column M and copy the Time Difference Value to column O.
Again, at any point in the process if we find a value equal to the starting cell, we ignore it and the logic continues. The logic continues flip flopping like this to the last value of column.
Once all the Break Points and Time Difference between Break Points are extracted for each value in column G, the AVERAGE, STDEV and MAX values of column O are calculated in column Q, R and S.
There is a loop that controls the execution of the core logic until the last value in column G. In the macro I’ve hardcoded last row being 9171, but I’d like the Macro to figure out what the last row is automatically.
I know this description is a bit long but I’ve worked for many hours on getting it work properly. I just need some help to make it run much faster. I hope someone can help me out on this. I have the right logic, just need the speed now and I really can’t figure it out.
Attached is a sample files demonstrating showing how the logic to flips back and forth as moving down the column starting in cell G200.
The sample shows the results first 4 loops (Rows 200 to 203). The values in M and O are the results of the fourth loop.
Again, assistance is very much appreciated because I've taken this as far as I can with my limited experience.
EDIT - I can embed the Macro, but it'll probably much easier to actually see it in the sample file.
View 14 Replies
View Related
May 11, 2009
I have 10 columns (A-J). Column B is the Date & Column C is the Time, I have the data sorted 1st by date then by time. The 5th Column, E, is Size. The 10th column, J, is "Position."
This 10th column, J, is in binary format. A 1 equals a Position & a 0 equals no Position.
1) I need to find the Max Sum of the Size in which the Max consecutive set of 1s has occurred.
2) I need to also do this on a day by day basis, using the Date in Column B, without having to manually go through & modify all the formulas to reference the date.
I have a Sumif formula for the 2nd but it won't copy down to update the formula for each unique date. I have to manually change the date values & I have ~957 unique dates to do; so it would be a rather painstaking process if only done manually. Moreover, it doesn't count the Max Sum of all consecutive 1s in Column J...
The length of the non unique columns (all columns w/o unselecting the duplicate entries) is 19,068.
If you can be of help, I'd be very thankful...my brain is overloaded w/googling & using trial & error.
View 6 Replies
View Related
Dec 28, 2009
I'm looking for a VBA code or formula that will count consecutive values in a column.
Please look at my example sheet.
View 8 Replies
View Related
Feb 4, 2010
I'm trying to use this formula to count consecutive values but somehow it doesn't work properly.
Does anyone see what's going wrong here or is there a better formula to this?
View 11 Replies
View Related
Oct 25, 2007
Basically I want to calculate each team's home winning/drawing/losing streak. Here is a sample of the table (I've simplified it a bit and added fictional results):
(See Attached)
So, I want a formula that can tell me a given team's (e.g. Arsenal's) latest result, and how many previous consecutive results of that kind there have been. For example, for Arsenal, the result would be something like "W2" (i.e. Won the last two games). At the moment, the best I can do is to get the TOTAL NUMBER of a given team's latest result using this formula:
=LOOKUP("ARS",B:B,C:C)&SUMPRODUCT(--(B1:B13="ARS")*(C1:C13=LOOKUP("ARS",B:B,C:C)))
(Which also returns "W2").
View 4 Replies
View Related
Sep 22, 2006
I have a range of binary numbers and would like to count the number of times the value of 1 appears BUT there must be at least 4 consecutive 1's.
Here's an example:
1
1
1
1
1
1
0
1
0
1
1
1
The final count should be 6.
View 6 Replies
View Related
Dec 11, 2013
I was trying to see the values only if the same value arrived more than three times in the given range.
Ex:
ABCDEFGHIJ
1AAAABAA
2
in the given range A1:J1, I would like to count 'A' only if it repeats more than or equal to 3 times. For row 1 I should get count as 4.
View 1 Replies
View Related
Jul 18, 2014
I have been trying to adapt a couple of the posts I've seen on this topic but they seem to refer to counting in rows and I'm having trouble translating that to columns.
I have a simple situation. I have 1s or 0s in columns from left to right. I only want to count the first occurrence of consecutive "1"s and only if the series starts with "1" in the left most column. (I am trying to calculate consecutive years of giving and the columns are FY14, FY13, FY12, etc. Only people who gave in FY14 would count.)
Example:
Row 2: 11101010
Row 3: 11001011
Row 4: 00100110
I would like Row 2 to count "3", Row 3 to count "2" and Row 4 to count "0".
View 2 Replies
View Related
Apr 12, 2013
I have a user form with 125 checkboxes and if checked would like them to display one message box containing a specific message for that the checkbox slection, but all messages in one message box.
I have one command button that will list each message box individually, using code like this -
If CheckBox12 = True And CheckBox5 = True Then MsgBox "You would need to see your manager"
Each message box individually is time consuming and it would be better if they all displayed in one box. Of the 125 check box options, 7 or 8 will only be selected at any given time.
View 4 Replies
View Related
Dec 17, 2013
The formula in column B counts the number of values that are
View 9 Replies
View Related
Jan 26, 2010
I have a spreadsheet with employees performance results for the last 12 months. Column A contains name, columns B to M contain text "Gold", "silver" or "bronze". I need to count how many consecutive months thay have achieved "Gold" status BUT must include latest month.
So, if column M contains "silver" or "bronze", the consecutive answer (column N) would be 0. If col M = "Gold" but L doesn't then N = 1. If M and L = "Gold" then N = 2 etc etc.
Is there a formula I can use in column N for this without doing 12 "if" functions?
I think this needs to be an array formula but the ones I've tried I can't get to work.
View 6 Replies
View Related
Dec 12, 2006
I wanted to see if there was a way to hide rows that do not have a pre determined amount of values in a row (one after another). Attached is a simple spread sheet to hopefully illustrate what I need.
I'd like to be able to only show rows where 2 consecutive 0's exsist. Then 3 consecutive 0's. Ultimately I'd like to show anywhere from 2-12 consecutive 0's and have that selection available via the combo box.
View 5 Replies
View Related
Jul 25, 2013
I was wondering if it would be possible to filter by two consecutive cell values or colors. For example if I have in "A"
X1 (red fill)
X2 (blue fill)
X1 (red fill)
X3 (xx fill)
X3 (xx fill)
X1 (red fill)
X2 (blue fill)
X4 (aa fill)
I want to be able to filter so that the consecutive cells for x1 and x2 show up or red followed by blue.
So when I filter it will only show rows 1 & 2 and 6 & 7.
X1
X2
and there would be many of these values in the spreadsheet.
View 10 Replies
View Related
Sep 10, 2012
Say I have Column A populated with Employee Names, and Column B populated with "Pass" or "Fail" (which indicates a passed or failed customer service call monitoring).
For each employee, I want to be able to look at all of their overall scores (usually between 3 and 10 evaluations per month) and easily highlight people who have failed 2 out of 3 consecutive evaluations.
I want to integrate this feature in to a weekly quality report.
View 1 Replies
View Related
Jun 13, 2006
I am trying to select a range of identical values in a column. Basically I need to ask Excel to highlight any and every part of the worksheet where the value '0' (zero) occurs 30 or more consecutive times in any given column.
View 2 Replies
View Related
Aug 13, 2014
I have a range of say B1:Z2. In row B1:Z1 I have dates in the format dd-mmm-yy. In row B2:Z2 I indicate presence of a person by "P". This is at infrequent appearance i.e. p,p,p,blank,blank,blank,p,p,p,p,p,blank,blank,p,p,blank,p,p,p, etc. I am trying to find or workout a formula that would find the most repetitive Ps in row B2:Z2 and give me the sum thereof. I.e, from the above example it should be 5. It does not have to count specifically P. Something that counts the most non-blank sequence of cells in the range should also do.
View 8 Replies
View Related
Oct 12, 2012
I am looking for a better way to determine if a column of values contains a sequence of consecutive matches. For example, column A contains single words. To determine if three consecutive cells contain the word "neuron", I enter in cell B3 the formula:
=IF(AND(A3="neuron",A3=A2,A3=A1),1,"")
And copy down. I then test column B to see if there are any non-blank cells.
If we want to change the word or the number of consecutive occurrences, I have to re-edit all the formulas in column B. I want to eliminate the helper column. I would like to put the word in B1, the number of consecutive occurrences in B2 and have a formula in B3 that will return either True or False.
I can do this with a UDF, but the user has rejected this option.
View 9 Replies
View Related
