I need to perform the following calculation:
=FTEST($A$2:$A$30,$B$2:$B$30)
The problem is that this statistical test needs to have pairs and sometimes the ranges won't all be filled or paired. For example, column A may have 15 rows while column B may have 20. So in this case I would need to only add A2 through A15 and B2 through B15.
Is there any any that can be done?
I am having 2 problems with dynamic named ranges. On one hand, I am getting a LOT of duplicates in some ranges and a lack of entries in those ranges that have too many blanks. Here is a sample of the dynamic named range in the first column:
This first range is called "NamedRange_1"
=OFFSET(Data!$A$2,0,0, COUNTA(Data!$A:$A)-1,1)
how to eliminate both the duplicates and the blanks?
I'd like to concatenate the two columns in the file I've attached as a string of text that I can copy to another sheet. The second column in the file attached will be a vlookup from another sheet. However as shown in the file, I'd like to ignore blank cells and only concatenate if they have data in them.
View 4 Replies View RelatedI'd like to concatenate two columns but ignore blanks.
I've attached the file that I'm working with.
I'd the format to be as shown in the sheet.
I'm trying to do a Data Validation list where there is a range from A1:A10 named List, but there are only values in A1:A5.
For the drop down menu, I've done the Data Validation and List, and made it =List. The problem with that is, I only want the drop down to give the options if there is a value (A1:A5 not all of A1:A10). I thought that the Ignore blanks feature would do that, but it does absolutely nothing.
I've come across a problem using the =SUMIF/COUNTIF function in excel. It incorrectly calculates blank cells as zeros.
=SUMIF(D4:D54,"Solar",T4:T54)/COUNTIF(D4:D54,"Solar")
The correct output should be 100%, but shows as 66.67% because of the blank cells in the column. How do I correct this?
I am ranking data using the below formula but if a cell is blank then I would like that cell ignored and only rank cells that contain data
{=SUMPRODUCT(--($A$2:$A$10243=$A2),--(IR$2:IR$10243>IR2))+1}
The A2:A10243 is a column containing an id number for the data held in cells IR2:IR10243.
I'm having a tough time writing a formula to return the min value for a particular item while ignoring blanks.
In the attached example, I'd like the result of cell E3 = 1 (the minimum for Texas).
What the best formula to compute the min value for Texas (ignoring blanks)?
I want to create a validation list with value comming from formula and I got blanks line. I have to create a dynamic list, I can have 15 possibility and it came from a lookup formula. When I choose the 15 cell with the lookup formula it show the empty cell. I did a exemple of my problem. You can check the attachement to understand my problem in the cell C1.
View 2 Replies View RelatedI have the following Conditional Formatting vba code shown below which allows me to format diffrent ranges according to the values in the cell, What I want to be able to do is that if Mycell.value ="" then do not apply the colorindex value, in other words leave any cell in the range which has a null value unchanged.
Private Sub CommandButton1_Click()
' Conditonal format for New hourly report
Dim Mycell As Range
'SL80range formatting
For Each Mycell In Range("sl80range")
Select Case Mycell
Case Is >= 0.8
Mycell.Interior.ColorIndex = 4
Case 0.7 To 0.79999
Mycell.Interior.ColorIndex = 44
Case 0.00001 To 0.6999
Mycell.Interior.ColorIndex = 3
Case Else
End Select
Next
I'm using the following formula to look at a range of cells and return the most common text entry. The formula works fine as long as there is text; if there are more blank cells than entries, then it returns a 'blank' and my formula cell is empty. How to clean this up so that it ignores blank cells?
=INDEX(C2:C11,MATCH(MODE(COUNTIF(C2:C11,C3:C11)),COUNTIF(C2:C11,C2:C11),0))
I am using Excel 2003.
I have a pivot table in sheet1 and references in sheet2 like
Code:
='Sheet1'!A1
and so on to copy the whole thing to make it the source data for a bubble chart.
Now, I want to convert the table in sheet2 into a list via Ctrl+L to be able to sort by names with a dropdown menu. Unfortunately, I have to copy all rows from 1 to 1000 to account for possible increases in the pivot table size. This results in blanks in the list and when I want to sort it, I have 990 blanks before the first data rows show up. Not very neat
I have a spreadsheet that is tracking a MTD receivables (running total). When it comes to weekends or day's when their were no receivables the running total needs to reference the last working day or the last receivable entry to perform its calculations for that day.
So in the table below (couldn't post attachment) the first row(1) = days of week , second row (2) = running MTD totals and the 3rd row (reference cells). So for Wednesday I our totals were 9995 which I entered in Row 3 (column A) and called it to Row 2 (column A). For Thursday I called Row 3 (column b which was known and manually entered) and subtracted Row 3 (column A) and populated Row 2 (column b). So my equation to in Row 2 column b is simple as =sum(b2-b1)
This is ok but when the weekend (or days not worked) come in to play you can see it produces a negative for Saturday / Sunday. Saturday took 15,707 and subtracted it from nothing (row 3 column d) since there were no receivables on Saturday.
So I need a formula that will calculate from the last instance while ignoring blank cells.
Wednesday
Thursday
Friday
Saturday
Sunday
Monday
9,955.00
3,325.00
2,427.00
(15,707.00)
(0.00)
20,903.00
9,955.00
13,280.00
15,707.00
20,903.00
i have this code which inserts blank rows in alternate rows,
Code:
Sub insertrow()
' insertrow Macro
Application.ScreenUpdating = True
Dim count As Integer
Dim X As Integer
For count = 1 To 20
If activecell.Value "" Then
activecell.Offset(1, 0).Select
[code].....
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
In column A I have a list of text. There are blank lines in between the cell that actually contain text. What I am trying to accomplish is create a validation list that will give me only the cells with text in them and ignore the blanks. For example in column A1:A7 I have the following text:
John
Mike
Tony
Jake
My validation list will return those names but will also give me the blanks in between the names.
Is there any way to ignore the blanks?
I'd like to compute the average of a few numbers, but only if the data has a certain number of non-null values. I've attached my Excel sheet for reference.
I have relevant data in columns B and D, where B represents a day and D represents temperature. I'd like to average the temperatures together for each day and place the result in column E. However, this must be done only if each day has at least 22 non-null values (null values are represented by -9999).
A perfect example is day 296 - my average is thrown completely off by the existence of several null values in the last half of the day.
In addition to the problem above, I'd also like to only compute the average using the non-null values (ie, if a day has 23 non-null values and 1 null value, I want to ignore the null value in the average calculation - see day 222 as an example).
How would you turn
A | B | C | D | E | F | G
1 2 3
into
A | B | C |
1 2 3
A | B | C | D | E | F | G
1 2 3
A | B | C |
1 2 3
Attached is a spreadsheet I am working on that has a series of graphs with defined dynamic ranges. I am having 2 separate issues on 2 different tabs.
1) Ranges named AirRecBra4 (and Bra10); AirComBra4 (and Bra10); AirRemBra4 (and Bra10) are not pulling in data from the correct data points. Instead of using the last 26 data point, they are currently beginning at the top of the column (currently cells 11 to 36 is their respective columns). The formulas are copy and pasted from working offset ranges in the same tab but are reading differently.
2) On the last 6 tabs beginning with Stn Backlog, I want to have defined formulas beginning in cell B119 and continuing downward to at least F200. However, when I add the formulas, the offset reads the formulas as being data and adjusts for that. I do not know how to adjust the dynamic range to ignore formulas in blank cells.
Global Demand-Capacity Management_working (version 3).xlsm
I have in column D starting D9, I have numbers starting at 1, and may finish at 100. But there could be duplicates, 1,2,3,3,4,5,6,6,7,7,8,9,10,10,11,12,13,.........
I would like to only copy the range D9 to H (End of column D), ignoring all the duplicate numbers, to another sheet.
So on the second sheet, it would be 1,2,3,4,5,6...... with the data copied from E,F,G and H.
Using the following bit of code that will Select the whole range of A2:C2 all the way down to the last row:
ws2.Range("A2:C" & ws2.Range("A2:C2").End(xlDown).Row).Select
How do I get around it if there happens to be a Blank cell(s) within the range.
I still need to work with the range even though there may be blank cells.
I have use for this function on varying ranges. I pasted my function as well as my call to it. PhasesActive is just a named range of 5 cells. I get an error... by ref argument type error. Something with the argument, do I have to name the worksheet the range is on?
Function RangeValueCount(Rng As range)
'The function to check if a range has more than one value marked for 'selection, ex: The phases choices
For Each cell In Rng
If Not IsEmpty(cell) Then
RangeValueCount = RangeValueCount + 1
End If
Next cell
End Function
Call RangeValueCount(PhasesActive)
If RangeValueCount > 1 Then
msg = "There appears to be multiple phases selected. Please select only" & vbNewLine
msg = msg & "one phase at a time"
MsgBox msg
End If
I'm trying to output a couple columns (and 300 rows) to a csv file. This code works wonderfully, save for the fact that it doesn't igore any cells in the range that are empty.
how I can get it to ignore empty cells?
Public Sub textFileDelim()
Const DELIMITER = ","
Const MYFILE = "E:EricTesting Folder2_Thurs.csv"
Dim Last_Column As Integer
Dim Last_Row As Long
Dim Row_Loop As Long
Dim Column_Loop As Integer
Dim FileNum As Integer
FileNum = FreeFile
Trying to do the following. Look at a range of cells in a row, say A1- H1. Sum the last three cells that have a number in them versus being blank. So, let's say the last numbers in row 1 are in cells B1, F1 and H1, but in row 2 they may be in cells E2, F2 and G2.
View 3 Replies View RelatedI have data that gets seperated into different cells and what i need is for all the data to line up from left to right with no empty cells in between.. so basically shift delete on each cell and shift the data left.
So i thought i know, ill simply f5, select the blanks, delete and shift left... however that option doesnt come up.. it simple says delete row?
What is the best way to select all the blanks in a range and delete them and have the cells that contain data move to the left so all data is next to each other.
I have copied the following codes to create a Function of "Concatenate a Range Skip Blanks". However, I humbly seek help to add "," in between every word and also take away the empty space when there is only 2 words are concatenated. Pls refer to my attachement for easy understanding.
View 6 Replies View RelatedI am in need of a solution (probably VBA) that can fill a range of cells with a formula IF they are blank. Ideally that range is a named range I can define in Excel. If that is too hard, then a hard coded column I hand-edit the script for is tolerable. Also, ideally, this script auto-executes whenever data changes on the sheet.
You formula I will populate is:
=IF(ISNA((VLOOKUP(B33,$A$32:$L$43,12,FALSE))+1),"",(VLOOKUP(B33,$A$32:$L$43,12,FALSE))+1)
..but a simpler formula can be stubbed in.
NOte that it does have relative references, so the script needs to adhere to normal EXCEL conventions of enumerating cell references.
If the script points to a refernce cell that contains the formula that is uber.
Maybe it should do copy and paste instead of a string replacement in order to leverage EXCEL's referencing?
I'm stuck on this, and this would be VERY useful for many of my sheets to be able to point to a refernce cell containing a formula to fill in.
i have a sheet with many formulas on it some in a range are if statements which output a blank ("") if the condition is not met i.e. false.
i need to be able to count how many blanks (false) in the range
Trying to determine the best way to do this. I understand that the standard AVERAGE function will ignore blanks if given a range; the function I'm using does a search for a particular value to determine if a value is to be included in the averaging: ...
View 9 Replies View RelatedI want to count blanks in a horizontal range (all in one row) that will change (dynamic range). The values in the range could be numbers or words. Some values may be added to the end, but there may still be some empty cells to the right of the last value. My goal is to count blanks in the range up to the last entered value, but no beyond that. As an example:
A6 = 2
B6 = empty cell
C6 = 2
D6 = empty cell
E6 = tt
F6 = empty cell
The range for the count blanks would be A6:E6. F6 is not included because the last entered value is in cell E6.
The answer (count blanks in dynamic range) should be 2.
I have got these 3 formulas to work, but it seems that there must be a better (shorter, faster calculating, more elegant) formula than these:
=COUNTBLANK(OFFSET(A6,,,,MATCH(9.9E+307,MATCH(A6:F6,A6:F6)+TRANSPOSE(ROW(INDIRECT(""1:""&COLUMNS(A6:F6)))))))
=COUNTBLANK(OFFSET(A6,,,,MATCH(9.9E+307,MATCH(A6:F6,A6:F6)+{1,2,3,4,5,6})))
=COUNTBLANK(A6:INDEX(A6:F6,MATCH(9.9E+307,MATCH(A6:F6,A6:F6)+TRANSPOSE(ROW(INDIRECT(""1:""&COLUMNS(A6:F6)))))))
How can I get the last cell with data, show in other cell? For example last cell populated info in total cell.
Date Cases Within 30 Days
01-Sep-0622.83
02-Sep-0622.78
03-Sep-06
04-Sep-0622.86
05-Sep-0622.82
06-Sep-06
07-Sep-06
Total22.82