the problem is that when both if statements are true i want it to get the row number, this is because table1 has blank rows (can not be avoided as the data is linked from a closed workbook)
i can see this works up until it meets the first blank row and i get #value error.
on table1 data exists on row 1,2,5 and 8 so my problem is getting the small function k to report these numbers?
I have a column of week numbers but some gaps in the list (e.g. the job is complete and so I do not want to reference it) I am trying to create a list of jobs by week number. I need to sequentially number jobs to then use Vlookup e.g. job1-week1 job2-week1 etc to display be week.
I can work out to number the list ignoring the blanks but then resetting to 1 with each new week?
I have a column of numbers that are derived with a formula. I need to Average only the ones that either have a Positive or Negative number, ignoring blanks or zero.
I have tried Search but couldn't find anything that address both blank and zero.
I am using a simple SUM formula like this, =SUM(D10:E10). I would like for the SUM cell to be left blank until a value is entered into the cells D10. Currently it calculates the SUM as 0.
I want to count back the last 6 cells in column S which has data (ignoring any blank cells) and add them up.
My data is ranging betwen S62:S143 (with S144 being the cell that I want to show the total for the last 6 cells with data). I have column headings and various other bits of data from S1:S61 that I want to exclude completely but need to keep for historical purposes.
Here is an example of some of the data in column S:
I have tried adding a negative and positive number on the end of the COUNTA formula but all it does is count all the cells within that given heigh range, not a specific number of cells with data.
I don't specifically need to use SUM. As long as I get a total.
Trying to determine the best way to do this. I understand that the standard AVERAGE function will ignore blanks if given a range; the function I'm using does a search for a particular value to determine if a value is to be included in the averaging: ...
I'm using the following formula to look at a range of cells and return the most common text entry. The formula works fine as long as there is text; if there are more blank cells than entries, then it returns a 'blank' and my formula cell is empty. How to clean this up so that it ignores blank cells?
I'm using the above formula to join text from columns Z through AC, separated by a comma. I now want to remove the comma at the end of the new string. Also, I would prefer it if the four cells were separated by a slash rather than a comma, but when I simply replace the commas in the formula with slashes I get an error.
I have a set up of investments. Say A1 through to G1. Then on the next row the investments range from A1 to G1 again. This continues down many rows. There are spaces such as D1 and D2 through E2.
A B C D E F G 1 ausbil........................
Starting in column H, I would like to list the investments but ignore investments that have already appeared on the row (ie list only the first occurence) and ignore the blanks as well. For example, D1, E1, F1 are to be ignored because of the blank, and the fact that ausbil and amp already appear. In row 2, the blanks in D2 and E2 are ignored as well as the repeated 'amp' in F2. So the table should look like below from column H:
H I J K 1 ausbil amp vanguard bt 2 amp becton fidelity bt
Is there a simple formula for this? It has to be in rows as I have at least 60 columns of data before these columns begin. There are at least 300 rows.
I am wanting to have a sheet that I use for reporting based on another sheet in the workbook but I want to exclude items that are closed.
The first sheet will contain all rows of data with a status column of either Open, On Hold or Closed In the second sheet I only want to have listed the items which are Open or On Hold, I want to ignore the closed items.
In the example enclosed, I only want rows 2,4,6 and 7, but NOT 3 and 5 due to status.
I have a spreadsheet with a bunch of formulas in Cells B4:E100 in Sheet1. Many of the formulas will show up blank information in the event I do not have any data in Column A. I then have formulas which perform a similar function in Cells G4:Q100, S4:AC100, AE4:AO100 & AQ4:BA100.
What I need to do is to take the data from the last 4 sets of cells (G4:Q100, S4:AC100, AE4:AO100 & AQ4:BA100) and stack then one on top of the other into Sheet2 starting in Cell A2. I need the code however to be smart enough to realize that if there are blanks which exist in any of those sets of cells to skip over to the next set of data I which to copy and start pasting that set of information without leaving any blanks.
So far example, if I only have data between Cells A4:A25, I want the VBA code to go only through cells G4:Q25 and then start pasting without any spaces S4:AC25 and so on.
I am trying to create a weighted average which will skip any row when Column B say's "yes" and then if Column N contains, a 0, I would like that to be skipped as well. The below works for skipping any row with the word "Yes", but it still includes 0 in the weighted average. Also, let's say the Column N contains a word and 0's, how can I skip that?
How can I count the number of elements of a particular dimension of an array variable that have actually been filled with items/values?
For example, the array variable in this procedure has two dimensions. Dimension 1 has three elements, and dimension 2 has 5 elements. I then add values to some, but not all the defined elements of dimensions. How can I count, for each dimension, the number of elements that have values rather than are empty?
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
I am trying to use an array formula based on column A of sheet 1. Also using column A of sheet 1 last row ref for Sheet2 Array formula.
I have attached the document in here "Sample.xlsm"
When I run the macro for the dates, all I got is just "Date". I just want unique dates using the array formula which work without using VBA but the column A in Sheet1 is a dynamic sheet.
I'm working with a large amount of data (A21:BZ1503) and I'm trying to identify unique situations where any pre-defined combination of multiple columns in one row is flagged by producing a pre-defined value. For example:
I have my pre-defined criteria in worksheet 'X' hidden in my workbook -- note that there are many blank cells.
I have an array that includes blanks in it. What is the formula to use to output the array of values without the blanks? Example: I have an array (Cells A1:A10) with thirty blanks within this 10 cell array. I wish to have the list of non-blanks outputted, presumably to the next column (Column B).
When I stepped through the formula evaluation it seemed to evaluate all the blanks as zero. So the problem may be with the data but I can't think what.
Does anyone have any suggestions and/or workarounds?
I am after a formula that will calculate the blank cells since the last cell with a value in it.
Eg. I'm putting the formula in Column AW and have values in AH & AR and want to know the number of blanks since the last value which should be 4 in this case. I will need to copy this from row 1 to row 1000.
I got the following loop that is very slow. The main way (I think) to speed it up is to avoid looking at all the 65000 cells. The columns used in the calculations have data varying from a few hundred cells up to (rarely) dozens of thousands. I assume it would be better if I could replace the 65500 with something indicating the "end" of the data in the column. Also, is there another way to do this process without using a loop?
I am trying to fill in a number of rows with array formula's in the adjucent cells. I use the loop because the number of rows depends on a selection of another parameter which sets the row number before calling the loop.
I'm having difficulty creating an array formula. In a multi-column sheet, I am looking at a column with classes and a column with a date (in the format 7-Oct-09). I need to list the number of a specific class for a particular month (any day). I have tried the following which gives only the number of classes: =COUNTIF(A4:A2500,"AA")+COUNTIF(H4:H2500,"10/??/09") and =SUM((A4:A2500="AA")*(H4:H2500="??-Oct-??")) which gives me 0. Maybe an array formula is not the way to do this.
Is there anyway to make this work without having to enter a specific range. For example I want to count the duplicates in column U, but don't want it to count blank cells.
Here is my formula right now, and it works, but it counts all of the blank cells in the row as duplicates. How can I stop that?
Id Name 1 dsf 1 sdfs 1 sdw 1 we 2 dsf 2 fds 2 3 saf 3 saf 4 fds 4 4 fds
I have then created a summary sheet, I want to count the values in column B (Name) for each Id (Column A) but I want to exclude the blanks. So my Summary page will look like this with the following results:
I have use for this function on varying ranges. I pasted my function as well as my call to it. PhasesActive is just a named range of 5 cells. I get an error... by ref argument type error. Something with the argument, do I have to name the worksheet the range is on?
Function RangeValueCount(Rng As range) 'The function to check if a range has more than one value marked for 'selection, ex: The phases choices
For Each cell In Rng If Not IsEmpty(cell) Then RangeValueCount = RangeValueCount + 1 End If Next cell End Function
Call RangeValueCount(PhasesActive) If RangeValueCount > 1 Then msg = "There appears to be multiple phases selected. Please select only" & vbNewLine msg = msg & "one phase at a time" MsgBox msg End If
