How To Make Space Between 2 Values In VBA

Jan 31, 2013

I have the following line of code:

Code:

Range("D" & LastRow).Value = Area.Text + Level.Text

Area and Level are both comboboxes on a userform, I want them to both go to the same cell but with a space between them. Right now it looks like "AreaLevel" but I want it to look like "Area Level".

I assume that I can do this by making each value in the combobox have a space after it but I would like to know the proper way of doing it...

View 3 Replies


ADVERTISEMENT

Using The IF Function, To Make Entering A Word, Space Then Word Correct

May 6, 2009

How can I use the IF function, to make entering a word, space then word display correct and incorrect if not.

View 13 Replies View Related

Removing Random Amount Of Values After The First Space From Right

Aug 15, 2014

I'm working on a big sheet in which I have values like the following:

Testtest 12345
Test 134691241
Testtestest 2385.234
Test test test 235
Testtest test 14.35172'36
T.E.S.T. test test 31246

What I need, is a formula removing anything after the first space (" ") from the right side, but I cannot seem to figure a way to solve the problem. I tried using SUBSTITUDE, REPLACE, FIND, LEFT, RIGHT, IF, COUNT, LEN formulas,

View 10 Replies View Related

Excel 2010 :: Pasting Space Separated Values?

May 9, 2013

I have some text out of note pad in the following format

"cat" "dog" "bird" "turtle"
"cat" "dog" "bird" "turtle"

There is several lines like this. I need to copy it out of notepad and paste it into excel where every word in quotes is in its own cell. Right now if I paste it everything goes into cell A1.

I am using excel 2010..

View 4 Replies View Related

Extend Space Of Userform Beyond Its Maximum Space?

Oct 16, 2012

Is there a way to extend the space of my userform beyond its maximum space? I have tried using vertical scroll bars but they were of no use.

View 1 Replies View Related

Locate Text String After First Space And Before Last Space

May 26, 2007

I have been working on different formulas to return the text string between the first and last space and have been unsuccessful. Is this possible?

I have tried several combos or Left and Right, I have been able to get the values after the first space, and the values before the last space, but not between the spaces.

String: Y60
~C CULT NUCLEUS 3X2 SPRING WST BK XL

Desired results: D60
CULT NUCLEUS 3X2 SPRING WST BK

View 9 Replies View Related

Remove All Text Left Of Space And The Space

Feb 10, 2007

I have two words of differing character lengths separated by a space.

How can I remove the first word... essentially, all the charcters to the left of the space AND the space itself?

View 9 Replies View Related

COUNTA Not To Counting Space Bar Space

Feb 15, 2009

I have the following formula that works fine until someone uses the space bar to clear a cells contents

=COUNTA($D11:$AI11)

When the space bar is used to clear a cells contents the COUNTA statements includes the space in the count. How do I count the number of cells with content and exclude the space bar space in a cell?

View 4 Replies View Related

Delete Space After Dot In Cell B1 If A1 Contain Dot Without Space

Nov 6, 2012

If find dot. with out space in ( A1 ) cell remove space after dot in cell ( B1 ) Cell, vb or macro

A
B

M V Micunovic
MICUNOVIC,M V

L.T.Kudrjavceva
KUDRJAVCEVA,L. T.

D Sumarac m.l.
M. L,D SUMARAC

View 1 Replies View Related

Remove Only One Space If There Is Space From The End Of Text

Apr 10, 2013

I only want to remove one space at the end of my text within a cell, if there is a space.

Code:
Sub hth()
Dim c As Range

For Each c In Range("H1", Range("H" & Rows.Count).End(xlUp))
c.Value = Trim(c.Value)
Next c
End Sub

View 9 Replies View Related

Make A Graph Without Plotting Zero Values

Oct 22, 2008

I've two collumns, after some index the values of cells are zero
how i can draw a chart without selecting those zero cells?

View 6 Replies View Related

How To Make IF Work On Formulas And Not Values

Nov 18, 2013

I've developed a spreadsheet that shows what errors people made in their spreadsheets. I compare cell A1 in spreadsheet 1 (original) against cell A1 in spreadsheet 2 (final), in spreadsheet 3. Spreadsheet 3 shows a "-" if the cell they wrote was OK, and shows the new, correct value if they made an error, as follows:

=IF('Final'!A5='Original'!A5, "-",'Final'!A5)

The problem is, this only works if I take the original spreadsheets, which contain formulae in each cell, and paste them into a new spreadsheet using paste values.

Is it possible for the IF function to search the formula in a cell, and not the value?

View 1 Replies View Related

Make A Cell's Values Become A Formula

May 23, 2008

I have on my Sheet named "Data" in Cell K4

=CONCATENATE(L16,O25,L18,O25,K20,S25,N22)

The values of that cell become a formula.

I try to make a macro that pastes 'Data'!K4 into 'Data'!L3 and then have that formula functioning in cell 'Sheet1'!A31.

The problem is when I try to make a macro to do this it will always paste the values that were recorded during the macro rather than the unique formula that is created via cell 'Data'!K4 at the time.

Is there any way to have A31 actively using the values that are created with 'Data'!K4? at all times?

View 9 Replies View Related

Make A List Of Unique Values Using 3 Different Columns?

Feb 26, 2014

See attached file with a smaller sample of the 1667 row table of data I am working with. What I am looking to do is make a list on another sheet of each every line with a county and have the corresponding Township and range with it. So if I have a cell and I select Audubon county, I would like a list to populate that has the 12 lines of Audubon county in column A, and the Township in column B and the Range in column C.

Excel Rate Example.xlsx

View 5 Replies View Related

Store Values Within A Cell To Make Them Selectable?

May 29, 2009

I do data entry for a webstore and one cell is used to map out the exact product category/subcategory path. I currently have to copy the appropriate path from a long list on one page and then paste it into the cell. I have to do this a hundred times a day. It would be nice if each cell within that column can have these values stored in them so I can just click on the cell and open up a drag down box and select the needed value. Is this possible to do in Excel?

View 2 Replies View Related

Make Formula Based On Two Incremental Values?

Feb 26, 2013

How do I make a formula based on two incremental values

e.g I drag this down

=ROWS(A$1:$A1)*B$4

where B4 is say 0.2

I will get

0.2
0.4
0.6 etc

But what if I want to start from 5 so it will be like this

5.2
5.4
5.6 etc

View 2 Replies View Related

Make IF Statement That When It's True It Need To Retrieve Values?

Sep 26, 2013

I need to make an IF statement that when it's true it need to retrieve the values from a different column. With what function is it possible to just retrieves values?

I need to return the value from pivot table. Forgot to mention this.

View 4 Replies View Related

Make Values Add To A Certain Sum By Assigning A Digit Or Chipher To It

Apr 23, 2009

I have a column of numerical values: fields a1 to a10. Then, I have four fields – c1 to c4 – in which I want sums of some chosen values from column a to be summed up. Eg., c1 is to be a2+a3+a9, c2 is to be a4, c3 is void, c4 is a1+a8. The other a fields are ignored, and no a field will be counted twice. Now, I want to put something –*a letter or a number or so –*into the fields b1 to b10, that makes the aforestanding value sum up to a certain field in column c. Like, I put a "1", or maybe an "a", into b2 and b3 and b9, and that makes a2, a3, and a9 sum up to c1. So I'd need something that says: if this cell is "1", add the value in the cell to your left to the sum that makes the value in c1. As you can tell by my writing, I'm no geek in these matters.

View 4 Replies View Related

How To Make Y Axis Values In Chart Jump From 0 To 40

Jul 17, 2013

I have a chart with percentages and most of them are >40% so I would like te values to start at 40 in the y axis but I would also want to have the 0% show (as it stands there is nothing there) It is a double y axis chart where the % is shown with just a dot and the other Y axis is the actual column. Im not sure if I'm making sense but I would just like to have the 1st value in the secondary y axis be 0 and the 2nd value be 40, and from that point forward scale in intervals of 5%.

So the values in the y axis are: 0%, 40%, 45%, 50%......

View 1 Replies View Related

How To Make Tab Names Dependent On Cell Values

Oct 17, 2013

Is it possible to make tab names dependent on Cell Values?

I have 12 Tabs in Workbook 1

Tab 1 = "COVER PAGE"

I would like Tab 2 ='COVER PAGE'!A1

Tab 3 ='COVER PAGE'!B1
Tab 4 ='COVER PAGE'!C1
etc...

Is this possible so that I can add cells (between B1 and C1) at a later date and have all the tab names change depending on the values I put in the cells?

View 9 Replies View Related

Make Exact Copy With Only Values And Layout?

Nov 20, 2013

I have a file and i want to make an exact copy with only values and the layout.

I can do copy paste each sheet in the new file one by one. with first the values and then the layout.

But the file has lot of sheets so it would be great to find a faster way then do it one by one.

View 1 Replies View Related

MACRO: Make A Table Of Calculated Values

Apr 19, 2006

I have made spreadsheet that calculates my total cost of making ice cream mix based on ingredient costs of two variables (Van_Gal, and Choc_Gal), for example 550 gallons and 750 gallons respectively. The worksheet calculates the total cost of making the Vanilla Gallons and the Chocolate Gallons. I’m not a VBA or Macro wiz, and now I’d like to Make a macro that will allow me to make a “table” of calculated costs associated with different assumed Vani_Gal and Choc_Gal amounts and then print the values; and then go down a row and print the cost of another amount of Vani_Gal and Choc_Gals until some preset end has been reached. For example:

Van_Gal; Choc_Gal;TOTOutput;avg cost
550; 750; 1300; $4,000.00; $3.08
600; 700; 1300; $4,250.00; $3.27

Let’s say that I want to know what the tot cost and avg cost per gallon for various combinations of Vanilla and Chocolate Mix from 550 V and 750 Choc for various combos and have it increase in iterations of 10 Gallons (i.e. 560 Van and 740 Choc); Maybe I'd use a " loop" that repeats calculations and prints them for different combinations of Van/choc until 800 Gals Van and 500 gal Choc. Once I have a table of values, I could sort it and find an optimal production level (with the Minimum avg cost). how to make a macro that can crank out a table like this?

View 4 Replies View Related

Extract Number Values From A Table And Make A List

Aug 9, 2013

how can i extract all number values from a table column and list them on a separate worksheet? there are blanks in the table column, which have to be omitted.

View 14 Replies View Related

Make Copy / Paste Values Macro More Efficient When Calculating

Feb 17, 2014

I got a macro to copy and paste values onto another tab within my worksheet. I have a lot of data and currently takes about 30 seconds to calculate and paste. Not sure if its an issue with my macro or with my computer (Mac - Excel 2011).

Here is an example of my macro:

Sub SimulateWeek()
If Range("AdvanceWeek").Value = "Week 1" Then
Range("Week1B").Copy
Sheets("Schedule - Results").Range("C2").PasteSpecial Paste:=xlPasteValues

[Code]....

(this continues on until 'ElseIf Range("AdvanceWeek").Value = "Week 31"....etc). So you can see I have the same code repeated 31 times.

View 2 Replies View Related

Combining Two Values In Two Separate Cells To Make A Cell Reference Or Index Refer.

Jul 15, 2009

I want to use a value in one cell as a row designation, and a value in another cell as a column designation. Ultimately, the values will be text which will refer to row and column headers. What formula would allow me to do this? example:

A1 contains B
B1 contains 2
B2 contains "tribbles"

An imaginary function might go like this........

View 3 Replies View Related

Make Userform Show Data From Spreadsheet And Add Delete Or Make New Entry

Jan 24, 2014

I have a spreadsheet on sheet 1 with a list of customers and their information. So on column A I have the customer number (i.e. k968, e37, p528,...), on column B i have the customer's name, on column C the street's name, on Column D the house number, on column E the zip code and finally the city on column F.

Right now there are around 600 customers in this list.

I have made a userform with a combobox in which I want to select an existing customer (pulled from the spreadsheet). On the same userform I have textboxes (customer number, name, street, number, zip, city). When I select a customer in the combobox, I want this customer's info to show up in the textboxes. I want to be able to change the info and hit Next to store the changes in the spreadsheet. When I do not select a customer from the combobox, I want to add new info in the textboxes and hit Next to store this info as a new customer. The userform also has a delete button. Then I select a customer in the combobox, this customer (and it's info) should be deleted from the spreadsheet when i hit Delete. So the spreadsheet is variable in length.

View 5 Replies View Related

Make Now () = 06/29/2009 (make To Cells With Dates Equal Each Other)

Jun 29, 2009

I need to figure a way to make to cells with dates equal each other if the
day,month and year are the same but are placed into a cell at different times during the day. "Making Date Now () = (06/29/09) In another cell". Therefore, A1= Now() and E11 = 06/29/09

View 2 Replies View Related

Make Number Formats Into Number Values?

Jul 3, 2013

I have used the formatting option to make numbers that once appeared as 1, 2, 3, 13, etc into four digit numbers, to appear as 3001, 3002, etc.

The problem is, I have other data whose original values are the 3000 formats, and Excel won't combine the two or sort them correctly.

Is there a way I can format it to change the actual value?

View 2 Replies View Related

Put The Space

Sep 15, 2009

We have a system that used to export postcodes with the " "(space) in the correct space, the system has changed and no longer requires exposts with spaces

I need a formula that puts in the space depending on if it has 7 digits or 6

For Example

TE557TT needs to become TE55 7TT if postcode is 7 chracters " " after 4

TE57TT needs to become TE5 7TT if postcode is 7 chracters " "" " after 3

View 4 Replies View Related

How To Add Space Between Numbers

Apr 12, 2014

I have list of phone numbers on excel.

I have A1 as xxxxxxxxxx(with out space)

I want same to be viewed in this format xx xxx xxx xx

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved