I need to make an IF statement that when it's true it need to retrieve the values from a different column. With what function is it possible to just retrieves values?
I need to return the value from pivot table. Forgot to mention this.
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
I have a IF statement like this:
If (Range("D29").Value > 0 Or Range("e29").Value > 0) Then
D29 is an empty cell and E29 is zero. The IF test returns true. Does having an empty cell make it non-zero for an IF test?
Hi. Is there a way to make OR() return 0 or 1 instead of true and false?
Or to convert true to 1 and false to 0?
I'm looking for an IF function formulae.Currently, the IF function of my cell is =IF($A8=B$1,1,0), value if true=1 , if false= 0.
But how do I make the cell A8 ( MRT , Taxi ) show a true value of 1 ?
Becos MRT , Taxi is also under MRT, but I don't know how to make it a true value of 1.
I have =(D4-C4)<40 (if the difference is 40 or less then color the font orange) but if the difference is 0 or a negative, I need it to do nothing. I don't know how to do the nothing part. I tried using the IF but couldn't figure out how to make the true format the color
View 5 Replies View RelatedOn sheet 3 column d i have a vendor number. I am trying to create a formula in column M (same sheet) that will say "True" if the vendor number in column d is also listed on sheet 2, column A (Rows 2-148)
View 2 Replies View RelatedWrite if statement or any other formula: if cell C3 is less then 0 then "over due", if = 0 then "due" and if more then zero then "not due yet" otherwise preferably nothing, because that would mean that the cell is empty.
View 6 Replies View RelatedColumn A: T/F
Column B: True/False
Here's what I want in a sentence: If one of the cells in grouped row is "T", column B = True, if not then column B = False.
(row groups are separated by a blank row)
Example)
Col A,Col B
TTRUE
FTRUE
[Code] ....
I came up with following formula:
=IF(MATCH(TRUE,INDEX(ISBLANK(A1:A17),0),0)>MATCH("T",A1:A17,0),TRUE,"")
It checks to see if blank cell is found before "T" but it doesn't look rows above.
inincubus.grouprows-1.xlsx
I have a worksheet called "Raw Data" where in columns J, I and G contain values. I would like to write a formula whereby if all 3 conditions are met, it will count the number of values found in column C.
I've tried to write an IF statement but it just returns FALSE, despite the result being true. Need the right combination of IF/AND statements that would do this?
=IF(AND('Raw Data'!$J:$J="Maintenance",'Raw Data'!$I:$I="Open",'Raw Data'!$G:$G="1-2008"),COUNT('Raw Data'!$C:$C)). I've tried to attach the workbook, but there's a problem with uploading attachments I think. Sorry if my explanation is unclear.
I'm looking to use an if/and statement to give back a true of false but it doesnt seem to be working, I'll give an example, I want excel to search a set of cells to see if its blank and another cell to see whats written there(from a pull down menu) and if both of them are true I conditionally format to go green, otherwise stay white. It works for one cell, condition below:
=AND(Anoop!B3="IIC",NOT(ISBLANK(Anoop!C3)))
but I cant get it to do this
=AND(Anoop!B3:13="IIC",NOT(ISBLANK(Anoop!C3)))
i.e search the entire column
I was also wondering if it was possible if it found an "IIC" in B8 how I could get it to check C8, D8 etc..
My excel sheet has to be perfect for my parser to accept the data, so that is why these small things are so important.
My Worksheet has a correct incorrect column using 1 and 0 's
I need a 1 and 0 in each row.
When I submit a new record I can do the following and it shows my TRUE record as a 1 but all my FALSE 0 records as blanks.
My False rows are blank and not ZEROS I use the - after the = and before the value
.Cells(iaRow, 2).Value = -Me.CBTrvAns1.Value
.Cells(iaRow + 1, 2).Value = -Me.CBTrvAns2.Value
.Cells(iaRow + 2, 2).Value = -Me.CBTrvAns3.Value
.Cells(iaRow + 3, 2).Value = -Me.CBTrvAns4.Value
[Code]....
I am using MS Excel 2010 want what to change a number of cells if a value is true e.g.
Row one has the headings Prz, Stat, Val, andPts
Row two has the following values :-
(Prz) a2 =2, (Stat) b2=1, (Val) c2=$30, (Pts) d2=10
How do I do the following in Excel :-
IF B2=1 THEN A2+1 AND C2+30 AND D2+5
so that the above cells are changed to
(Prz) a2 =3, (Val) c2=$30, (Pts) d2=10
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
I've got a formula that has numerous nested IF statement and am trying to get the true result to be the first of a given month of the current year. Here's my formula:
Code:
=IF(Setup!$B$3="X","1/1",IF(Setup!$C$3="X","2/1",IF(Setup!$D$3="X","3/1",IF(Setup!$E$3="X","4/1",
IF(Setup!$F$3="X","5/1",IF(Setup!$G$3="X","6/1",IF(Setup!$H$3="X","7/1",IF(Setup!$I$3="X","8/1",
IF(Setup!$J$3="X","9/1",IF(Setup!$K$3="X","10/1",IF(Setup!$L$3="X","11/1",IF(Setup!$M$3="X","12/1",""))))))))))))
Everything works, save that the cell becomes 1/1 with no year at all. I've messed around a bit with TEXT and various DATE/MONTH/YEAR functions on this one, but can't seem to get it correct.
I have a custom report on one tab called "Professional Services" and a list of invoices on another tab called "invoices". I need to pull the invoices from the invoice tab and put them on to the Professional Services tab in the appropriate place on the report.
For example, I need to pull back all invoices for center 820202, with the budget line name Controller Team Contractor. I want the Vendor name in column B and the Amount in column H. Here's another catch. If there is more than one "Vendor" with the same name, I want the Amount to sum. Make sense?
I thought maybe putting the invoice list in to a pivot table would be the answer but I can't get the vendor name from the pivot table.
I am trying to retrieve values with INDEX and MATCH. I have column B that contains "i", and "m".
I have formulas for the first occurence of "m"
=(INDEX(NUP!$J:$J,MATCH("m",NUP!$B:$B,0)))
Which will look for the first "m" and output the value in column J that aligns with the "m"
How would I alter this or a new formula for the nth occurrence of "m"?
I have Column A sample below:
Column A
Row 1 WG32127
Row 2 WFH3040 / 3920
Row 3 WFBF3709/3919
Row 4 WG32156/3915, 3911, 3920
Row 5 WG32148129/3915, 2922
I'm trying to use the Left Function to get only the Alpha-Numeric codes only. I'm having the following problems.
1) The alpha-numeric codes are not a standard number of characters (they can vary anywhere from 4 to 10).
2) In some cases the alpha-numeric codes are alone in the column
3) In other cases they are with other numbers with back slashes separating them
4) In the cases where there are back slashes there are spaces, commas and other numbers as well.
Is there a way to use the Left Function to retrieve only Alpha-numeric codes only.
Perhaps a bit cryptic but here is where I'm looking for.
Cell A1 gets the value YES (or NO) assignment by the user.
Cell B1 has some calculated value let's say 4 based on the formula If(A1="YES";2+2)
Now If the user assigns "NO" to A1 the value of Cell B1 becomes FALSE (return value of second part of the If statement)
I do not want the value of B1 changed if A1=NO and to stay the same (4)
I'm trying to make this piece of code work to no avail yet... Every time I run it, the compiler pops up with Error #9: "Subscript out of range". The range consists of hundreds of cells in 1 column with geographic coordinates formatted as "General". Like this: myArr(38.91472, 37.20318, 38.63824, etc.). Tried to re-format the cells to "Number" - doesn't work either.
Code:
Sub searchArray()
Dim myArr() As Variant
Dim i As Integer
myArr = ThisWorkbook.Worksheets("Sheet1").Range("G1:G8594").Value
For i = LBound(myArr) To UBound(myArr)
Debug.Print myArr(i)
Next i
End Sub
I am trying to write a formula using If statement to output the result "True".
I have 4 columns (P3, T3, AD3, AK3) that store a value of either "Yes" or "No", I want to check the column if they are equal to "Yes". I have written a formula but it only works for 1 column at the minute, i not sure how to add the other columns into the formula:
=IF(P3="Yes","True")
I am trying to set up a sumif statement with two criteria where if the second criteria is true, the total in the sum range returned is divided by two.
I currently have this:
=SUMIF($G$6:$G$41,"digital",I6:I41)
I want to add in "digital/creative" as a second criteria (from the same criteria range) but I only want 50% of the result of these to be totalled.
is this possible?
I want to lookup a value using * and ? and have the result tell me whether all possible values have a "yes" next to them.
Let me explain. Example.
If I have this in table1:
Records Yes/No adfcjks7as Yes 91521cg N/A 215a786 N/A 9194215g Yes 2154a6 N/A 614asdff No asdf562 Yes as895as Yes a5s5d8d6 No
And I type *as in cell A1
THEN I want cell A2 to lookup "*as" in Table1[Records] and determine if all possible records have "Yes" next to them in column Yes/No. The result is "ALLYES" if its true or "NOTALLYES" if its false.
In this example the result is "ALLYES" because adfcjks7as and as895as are the only records that *as applies to and "Yes" is next to them in the same row. If there is only one possible value then it still applies.
Of course * and ? will be used in different arrangements to find possible values.
Here's a simplified example:
ColA
ColB
ColC
Row1
A
Y
A
Row2
B
N
D
[Code] .........
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
I'm looking for some help. I need a function that can check if each of two seperate values is less than one. If less than one then divide by 2. Then give me the average of these two values. So it could be that it takes 0.5/2=0.25 for one value and 3 for another to give me the average of 1.625.
In the attached spreadsheet I would like to create a list of part numbers if column D E & F all have a #N/A value. Right now I'm using a True/False but this list contains around 3000 items and I don't want to have to scroll down to find the True values. Is there a way I can just create a list of corresponding part numbers to the True Values?
SAMPLE.xlsx
I'm using multiple data tables to run sensitivity analyses on a very large model. At the end of the analysis, I've got a matrix that tells me which scenarios are TRUE or FALSE (based on multiple criteria). I'm looking for an elegant way to extract the combinations that give TRUE.
Column1
Column2
Row1
FALSE
TRUE
Row2
TRUE
FALSE
Desired Output
True Scenarios:
R1, C2
R2, C1
I'm trying to find the sum of a range of values based on multiple criteria, and the criteria is that the fields all have to be identical, then sum them. I've attached a brief example spreadsheet that has the fields
A=City
B=State
C=Values
What I want the formula to do is first find the range of all the matching states, then find the range of all the matching Cities within the states, and then sum the values based on them having matching city values.
I've been able to do that with one criteria using SumIf, I'm not sure if this will help paint an image of what I want to do:
=ROUND(SUMIF($B$3:$B$11,$B$3:$B$11,$C$3:$C$11),0)
But I can't figure out the way to do multiple criteria against itself. Most of the results I get from Google using multiple criteria are using a set few values, and I can't seem to figure out how to alter those methods to work with my situation.
I need to count values of numbers in a row next to text(True ot False) Like:
A1____A2
True | 150
True | 66
False| 40
True | 78
False | 56
Output:
True: 294
False: 96
I have long text values that include names in cells A1:A100.
In cell D1:D10, I have a list of names that I would like to check if any of them is found in each of the cells in A1:A100 and if yes, return TRUE in column B.
So in a way, what I need is a a bit like the SEARCH function, only that I need to find multiple FIND_TEXT values. If just one of the names in D1:D10 is found, the formula should return TRUE.