I am trying to loop through some rows within a worksheet in an effort to make sure the values match a list of values that are defined in an array. However, when I get to the IF statement, I always get a 'Type Mismatch' error.
Dim varRetailers
varRetailers = Array("Depot", "Lowes", "Sears", "TSC", "Walmart", "Z-Other")
For c = rowDataStart To rowDataEnd
If Cells(c, colRetailCat) varRetailers Then '
Can somebody have a look at the workbook that I've attached.
I have set up a timeshhet calculator for work but the thing is, the hourly rates of pay are dependent upon the day of the week the Operative is working, and the time of the day.
We split the shifts AM & PM and the rates are decided as per the worksheet contained within the workbook "Rates".
The problem I am having is how to get the timesheet to understand the days.
For example, if an Op works the Sat night or Sun night, then the rate should reflect x1.5. If it's Sat/Sun daytime, then it's x1.25.
Again, and as per the "Rates" sheet (see top for the rate multiplier) Mon - Fri 09:00 - 17:00 is flat rate/standard hrs. If the work Mon - Fri evenings, then the rate is x1.25.
How can this be done?
Is there a way a string can be evaluated as a formula?
I'm building a formula by concatening several strings but can't find a way to evaluate the formula.
Do I need a macro or is there a simple way to eval it?
My purpose is to compare date fields in two worksheets and have the formula tell me if the dates match. I took care to make sure the dates were true date using =datevalue()
=IF(B2=VLOOKUP(B2,'Raw Data'!$J$2:$K$9748,1,FALSE),"Match","NoMatch")
First, it returns #N/A
Second, I used the formula one column over to evaluate invoice numbers and it worked though in the few that did not match it returned #N/A and not NoMatch.
=IF(C2=VLOOKUP(C2,'Raw Data'!$J$2:$K$9787,1,FALSE),"Match","NoMatch")
I have a formula which works (to the extent that it returns a value), but if I try to use the Evaluate Formula function, it fails at the first step, returning the "=name?" error. The formula does contain a number of named ranges, but these do not appear to affect it's function.
=IF(AND(PBREQ="NO",SEAS_PBREQ="NO",C8="P",F8="DML"),WORKDAY(EXWORKS,(VLOOKUP(E8,DISTINCREMENTTABLE,7,FALSE)*-1),HOLIDAYS),IF(AND(PBREQ="NO",SEAS_PBREQ="NO",C8="P"),WORKDAY(EXWORKS,(VLOOKUP(E8,INFINCREMENTTABLE,7,FALSE)*-1),HOLIDAYS),IF(AND(VLOOKUP(D8,ITEMTABLE,14,FALSE)="Y",C8="P",WORKDAY(H8,VLOOKUP(D8,ITEMTABLE,I8,FALSE),HOLIDAYS)
HI can't seem to get this last scenario laid into this if statement. I am having trouble with the second statement. I need the three cells to equal 100, but only when all three are filled. If only two as in this scenario I would like % Error in cell G2.
Sheet3 *DEFG250%50%*O.K.Spreadsheet FormulasCellFormulaG2=IF(SUM(D2:F2)=0,"",IF(AND(OR(ISBLANK(D2),ISBLANK(E2),ISBLANK(F2)),SUM(D2:F2))=1,"% Error",IF(OR(D2>E2,F2>E2,SUM(D2:F2)1),"% Error",IF(SUM(D2:F2)=1,"O.K.",IF(AND(E2>D2,E2> Excel Jeanie HTML 4
If Not IsEmpty(ActiveCell.Value) And ActiveCell.Value >= 4050 Then
The code in the above if statement is running when I hit a cell with no contents. When there is no such cell, it works fine. I've tried using "" as well but the same thing happens.
Sheet 1 to look into Sheet 2
> Find a certain string "name1" > if string is name, copy succeeding columns if not goes and checks another cell till it finds it.
> Then copied columns will be evaluated (sum, divide, etc)
this loops through all rows.
next problem i am seeing is what if it finds 2-5 names how can i combined all the cells copied?
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies View RelatedI am working on a customer report template that generates our customers reports and will send them out automatically.
This issue I have now is that the system that generates the raw data for these reports only lists the Customers name in a column with an entry for each line of data, the thing is though that the system has lots of variations of the customers name, even more so if that customers has different departments.
What I need to do is from this list of customer names, I need to automatically figure out what the "common" name is or main name so to speak, and then make a variable using the correct full name, which will be used later on in the code to import correct logos, and direct the reports to the correct people.
Here is a quick example of what data we get raw from the system:
Customer Name:
John Build
Johns Buildings
Johns Ltd Building
Johns Plumbing Department
Glass Doors Ltd A Department of Johns Buildings
Johns Building Corporation
Hole In One Golf Range
This is just an example, we have thousands of clients, so the length, number of words etc can change alot. Ideally I from a list similar to that I would get a full proper result of "Johns Buildings Ltd" for example, this would then be in a variable to be used in code from then on to reference doing certain things with the reports of Johns Buildings Ltd.
You'll notice there is one name "Hole In One Golf Range" that seems to have no relation at all, this is correct, ideally I would also like to build in some error checking into the code, so that rows like that that have nothing to do with the others would get deleted.
So how would you amazing VBA gurus go about working with data like this? I'd prefer a more general answer with explainations that just straight code, as I'm sure I will have to adapt the hell out of it for it to be useful in context.
Question contained within code:
Code:
Dim MyArray(6, 1) As String
Dim i As Integer
'' Array List 1
[Code]....
'If lbxLI = any list index from Array List 1 then use the value stored in Array List 2 to give Listbox 2 its rowsource.
'For example; ListIndex "0" would produce a row source "_0" for listbox 2. Else if ListIndex "1" is selected, produce row source "_1" for listbox 2.
' I would like to achieve this from one "If" statement. I'm guessing it must be possible using a loop, I just can't think how despite a lot of messing about with code.
i have a very large spreadsheet filled with telephone numberS and some other codes that go with them...i need to match the codes with the phone numbers.
Sub TRCO()
Dim TNs As Long
Dim i As Long
Dim TempArray() As String
Dim TRCO As String
Dim CD03 As String
Dim ASOC As Range
TRCO = "TRCO"
CD03 = "CD034DF1"
'Filter TN's
Columns("B:B").EntireColumn.Insert
Set tempRange = Range("A6", Range("A65000").End(xlUp))
With tempRange
. AdvancedFilter _...................
This formula's array
=IF(COUNTIF($A$2:$B$12,$A$2:$B$12)=1,COLUMN($A$2:$B$12)-COLUMN($A$1)+1)
returns
{FALSE,FALSE;FALSE,2;FALSE,FALSE;FALSE,FALSE;FALSE,FALSE;1,2;FALSE,FALSE;1,2;1,2;1,FALSE;1,FALSE}
This is the column number for each TRUE value
What I want to know is when I drag the formula down how can I obtain the values from left to right? ie:
2
1
2
1
2
1
2
1
1
I am trying to declare a public (or global) array and it's values so I don't have to keep dimensioning it for each function I create.
I was trying things such as:
Public whatever(10) as string
whatever(0) = "something"
whatever(1) = "somethin else"
....
And tried creating an initialize macro in "ThisWorkbook".
I am trying to store values into a dynamic array. The size of the array will vary each time, so I need the range to be dynamic. Most importantly, I need all values to be retained in the array. Currently, a value will be stored, but once the next round of the for loop is initiated, the array changes to "<subscript out of range>" and stays that way until the it is replaced by the next value. So, there isn't an accumualtion in the array--it goes one value, to out of range, to one value, etc.
View 8 Replies View RelatedI am using a macro to concatenate and sum values in a worksheet. It uses an array function in which it uses column numbers to put values in an array. With the column numbers "hardcoded" in the macro (e.g. myKeys = Array(1)), it works fine. But, when I created a userform so that I can change the values based on user input, I get a "Type Mismatch" error.
Attached is the workbook with both the working and non-working macro. Button labeled "No Form" is the one that is working, button labeled "Form" does work.
I am trying to simply place my array of values onto the worksheet.
I had read, and thought that the following would work:
I've been manually writing IF statements out for ranges of data that could easily be done with a little array work. So I set out to convert all my functions into something more readable and quicker to write. But I ran into a problem. I want to add the values of an array G45:Z45 if the corresponding values in G44:Z45 are less than or equal to P41. So I thought to use a SUMIF:
=SUMIF(G44:Z45,<=+P41,G45:Z45)
That didn't work, in fact, it didn't come error free until I did:
=SUMIF(G44:Z45,"<="+P41,G45:Z45)
But that doesn't add anything up either. From what I can see, the problem lies within the condition. If I simply put P41, it works. The moment I add <= I get a multitude of problems.
I'm trying to count the number of times "Y" occurs in column H and one of four values occurs in column B. I'm new at writing arrays and what I have so far is:
{=SUM((Main!$H$4:$H$700="Y")*OR(Main$B$4:$B$700="FGZ","FHZ","FLZ","NAV"))}.
This is returning a #VALUE error. A
I have an array defined from 1 to 100; however, only six elements of the array have a value. I need to add a value in between the ones already in the array. I have tried this snippet already with no luck.
Code:
For Z = a To MinPos
WOList(Z + 1).F1 = WOList(Z).F1
Next Z
WOList(MinPos).F1 = CalcValue
A is defined as the total number of elements with values in the array (6 values in this example). MinPos is defined as the location of which the value needs to be inserted (lets say index 2). I tried to shift all the elements to the right one, and add the number into the array.
I have Column A which is an Employees birth Year, Column B which is salary, and Column C which is a list of Years.
I need a formula to read the Year in Column C, refer to Column A finding all the rows that match that year, than refer to Column B (salaries) and find the average of the salaries.
I have been trying to set up a macro to find the Minimum and Maximum values from an array of temperatures for painting... so far, partially successful.
The problems I am having are that the values have 1 decimal place and can be anywhere between 22.7 to -1.4. When they come they are put on the spreadsheet, the MinTemp can be 10.0 and MaxTemp 9.9, totally reversed.
Dim Info(2000, 2) As String
Dim MonthValue(31, 9) As Variant
Dim Working1 As Date
Dim I As Integer
Dim J As Integer
Dim Tot As Integer
[code]....
Presently I calculate a worksheet and store the result in any array the size of which is determined at the start. I then enter all the results in a worksheet and get the max and min values and numerous other data. I am trying to find a way to get the max and min values without having to enter the data to speed the routine up.
this is the code that puts the results into a worksheet.
Code:
Sub Recalculate() 'Recalculates the WorkBook
Dim Calc_
Worksheets(startSht).Select
Set Output = Application.InputBox(prompt:="Please select the 1st Output Range.", Title:="SPECIFY RANGE", Type:=8)
Set OutPutLabel = Application.InputBox(prompt:="Please select Label for
[Code]....
I have a list of data in a range on an Excel worksheet.
I want to create a macro that searches the range e.g. $A$1:$A$10 and identifies the unique cell values into an array.
So if range data = "A,B,B,C,C,D,D,D,E" I would end up with an array containing 5 items "A,B,C,D,E".
I would then like to cycle through each array item and bring up a message box displaying the value of each array item.
Is it possible to add cell values to an array i.e. Array(cells(1,1).value,Cells(2,1).value)
View 9 Replies View RelatedI have made an array of variables and pasted them into another sheet using the range().value = myarray command. When I use the following command to put the values from this pasted set of variables into another array: ...
View 9 Replies View RelatedI have a spreadsheet of information (product codes and values) and want to use VBA to find the top ten list of products by value. The list of products is variable in length so I can pass the data to a two-dimensioned array.
How do I ask VBA to return the top ten products by value - there can be duplicate values so I just want ten (if there are 4 #9s, I just want two of them, any two)?
how to set all values in an array to be the same value. Currently I am using code in a For/Next loop like the following to do this:
Sub testing()
Dim ArrayToAllHaveSameValues(1 To 30) As String, i As Integer
For i = 1 To 30
ArrayToAllHaveSameValues(i) = "Value"
Next i
End Sub
I am have a 4x2 table and would like to use the values in the table in numerous procedures. i feel the best way do to this is to record the table as an array and be able to 'paste' or call the array anytime i need to. However, i am unable to read the table into an array.
1. how the array works,
2. how i can read values into an array and
3. how can i 'paste' or call the array at a later stage.
I would like to fullfil a range a cell with different strings. As the cells are jointed to each others, I would like to pass the string array to the range and not to pass each string to each cell, to spend time.
I mean, with the function
Dim stTxt(3) As String
range(Cells(1,1),Cells(3,1)).value=stTxt()
But I have some difficulties with this function:
-if the range is a column, the function works, but if the range is a row, then only the first value of the array is passed, and to all the cells of the range
-I didn't manage to use this function when using
Range(Cells(x,y),Cells(z,t))
and when the range is in another worksheet. I need to use
Cells(x,y).resize(z-x,t-y)
(I'm using Excel 2000).
how I can pass correctly my string array to a row of cells? (cf 1. point).