Userform Values In Array
Jun 23, 2014
I am using a macro to concatenate and sum values in a worksheet. It uses an array function in which it uses column numbers to put values in an array. With the column numbers "hardcoded" in the macro (e.g. myKeys = Array(1)), it works fine. But, when I created a userform so that I can change the values based on user input, I get a "Type Mismatch" error.
Attached is the workbook with both the working and non-working macro. Button labeled "No Form" is the one that is working, button labeled "Form" does work.
View 2 Replies
ADVERTISEMENT
Oct 2, 2008
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies
View Related
Oct 22, 2013
Question contained within code:
Code:
Dim MyArray(6, 1) As String
Dim i As Integer
'' Array List 1
[Code]....
'If lbxLI = any list index from Array List 1 then use the value stored in Array List 2 to give Listbox 2 its rowsource.
'For example; ListIndex "0" would produce a row source "_0" for listbox 2. Else if ListIndex "1" is selected, produce row source "_1" for listbox 2.
' I would like to achieve this from one "If" statement. I'm guessing it must be possible using a loop, I just can't think how despite a lot of messing about with code.
View 1 Replies
View Related
Oct 1, 2009
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies
View Related
Aug 31, 2007
I have been searching the internet and this sight and have found many variations, but I cannot seem to get my listbox on a Userform to populate.
The array is 10 columns by 5 rows. I can get it to add one long column of data, but this is obviously now what I want.
View 9 Replies
View Related
Oct 29, 2009
I'm trying to do: Let's say I have a simple userform with labels as follows:
(Label1) John's birthday: (Label2) 12.10.1974
(Label3) Mary's birthday: (Label4) 15.03.1978
(Button1) Change Birthdays
Let's say want to change the birthdays I see, so I press the button and enter the new values through another userform with inputboxes.
How do I make that change permanent, so that next time I start the macro in the labels 2 and 4 I have the last entered values for the birthdays???
View 4 Replies
View Related
Dec 18, 2012
I have a userform that opens, and allows the user to enter data into it for each row where a specific cell is blank. If the user hasn't updated in a couple of days that could be 15-20 entries that need to be made. Currently when the user clicks the close button the userform closes the form for the current row and shows for the next row, acting more like a Next button. I would like to be able to assign Previous, Next and Exit, where exit closes all instances of the userform, and not just the one the user currently sees. Even if we cant do previous and next, the exit button is really important sot he user doesnt have to click through in order to exit the userform.
The following is the code that brings up the array, followed by userform code
Code:
Sub ErrLogSupEntry()
'Application.ScreenUpdating = False
Set wsErrLog = Worksheets("Error Log")
UserName = Environ("UserName")
If UserName = "09070403" Then
[Code] ........
View 1 Replies
View Related
Mar 8, 2007
I would like to make up an array that includes certain userform controls, such that I later on can use a loop to run through those controls.
My Problem:
First, in line 1 the Sub cbStep1_Click calls the Sub unloadSlotValues, but then the latter throws me back directly to the Sub cbStep1_Click into the next line (line 2). There is no error or something, the rest of unloadSlotValues simply gets ignored. How can I ensure to loop through all my userform controls listed in that array? (Finally, there'll be around 15 controls, I think.) Maybe my array-initialisation is incorrect?
This thread extends a simillar one you can find How to clear userform controls
Private Sub cbStep1_Click()
Call unloadSlotValues '<-- 1. line
frmStep2.Enabled = True '<-- 2. line
frmStep3.Enabled = False '<-- 3. line
End Sub
View 4 Replies
View Related
Apr 22, 2014
i'm trying to develop an array that is populated when a userform is activated. The userform has a command button that when pressed, will cross check the information filled out in the userform with the entries in the array. If there are no matches then the array is ReDim and the new information is added to the array. Once all the entries have been made. The array is then transposed to a sheet titled "Database". My problem is that vba is not allowing me declare a public array.Below is the first part of the code. Which is when the userform is activated.
Private Sub UserForm_Activate()
With Sheets("Resources")
cbZIP.List = .Range("A2", .Range("A" & Rows.Count).End(xlUp)).Value
cbBED.List = .Range("B2", .Range("B" & Rows.Count).End(xlUp)).Value
cbBATH.List = .Range("C2", .Range("C" & Rows.Count).End(xlUp)).Value
cbSTABRV.List = .Range("G2", .Range("G" & Rows.Count).End(xlUp)).Value
End With
[code]....
View 1 Replies
View Related
Apr 13, 2009
Is it possible to count the number of comboboxes on a userform? Or better yet can I fill an Array with all the combobox names on a userform? I can count the controls on a userform but I'm trying to count just the comboboxes? Instead of all the labels and textboxes and frames.
I would like to loop through them for validation instead of doing it by each one by itself!
View 9 Replies
View Related
Jan 23, 2008
I am trying to figure out how to make a userform to display the contents of a 2-D array which has a variable number of rows. I want the userform to height of the userform to correspond with the number of rows of data to display.
I don't have much experience with userforms, but here's what I was thinking:
VBA code which would find the # of rows of data and then adjust the height of the userform and the length of the lable (which the data would go in).
View 4 Replies
View Related
Aug 3, 2006
i have a very large spreadsheet filled with telephone numberS and some other codes that go with them...i need to match the codes with the phone numbers.
Sub TRCO()
Dim TNs As Long
Dim i As Long
Dim TempArray() As String
Dim TRCO As String
Dim CD03 As String
Dim ASOC As Range
TRCO = "TRCO"
CD03 = "CD034DF1"
'Filter TN's
Columns("B:B").EntireColumn.Insert
Set tempRange = Range("A6", Range("A65000").End(xlUp))
With tempRange
. AdvancedFilter _...................
View 2 Replies
View Related
Jun 23, 2014
I have a userform where the user enters prices for up to 12 items in textbox controls, and these prices are stored in an array. The textboxes are titled tbPrice1, tbPrice2, etc. I'm having an issue with the line of code I am using to store the values in an array. Every time I attempt to store them, I get runtime error 13 type mismatch, but I don't understand why.
dim PartPrices(1 to 12) as Currency
For x = 1 to 12PartPrices(x) = IIf(Trim(Me.Controls("tbPrice" & x).Value) & vbNullString = vbNullString, CCur(0), CCur(Trim(Me.Controls("tbPrice" & x).Value)))Next
A little more explanation here. Not all 12 parts will have prices, so I use the IIf statement to store the value 0 whenever the user has left a price field blank. I use trim in case they leave spaces in the price textbox or something. When the field is not blank, I take the value entered in the textbox, convert it to currency and attempt to store it in the relevant element of the array.
View 2 Replies
View Related
Mar 28, 2008
I am trying to pass a string array into a form. I have added a member string array to the form, and a property to "Let" the array in the the member array.
Private sFormString() As String
Property Let FormString(value() As String)
sFormString = value
End Property
I can pass a string in using a procedure:
Sub StringArrayTest1()
Dim TestString() As String
Dim frmString As FString
but I cannot "modulate" the code, or else I get an internal error (error 51). I.e. this code doesn't work:
Sub StringArrayTest2Mod(TestString() As String, frmString As FString)
frmString.FormString = TestString
End Sub
Sub StringArrayTest2()
Dim TestString() As String
Dim frmString As FString
Set frmString = New FString
Redim TestString(1 To 2)
TestString(1) = "Cat"
TestString(2) = "Dog"
Call StringArrayTest2Mod(TestString, frmString)
End Sub
Does anyone know why this happens? Obviously, in the example code its not an issue, but the application I'm using this for is more complex, and some modulation here would be good.
View 9 Replies
View Related
Aug 16, 2008
I have problems with my userform's listboxes. I have two listboxes, and I want second listbox's values to be dependent on first listbox's values.
And even more complicated, I need second listbox's values to be dependent on values on certain matrix.
In that matrix, row headings are listbox1's values and column headings are listbox2's values. How ever there are blanc cells on that matrix aswell. So if there is a blanc cell(s) on a row which (heading) is selected at listbox1, then I don't want that column (heading) which intersects with the blanc cell to be included to my listbox2 values.
Finally I want to insert the selected values from listboxes and the value from the intersection of those listbox values (headings) on that matrix to worksheet.
I included an attachment, where you can see my point better. However, as you can see, now the listbox values are not dependent on that matrix. Otherwise it is working like I want it to work.
View 11 Replies
View Related
Jan 19, 2009
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies
View Related
Jul 30, 2014
This formula's array
=IF(COUNTIF($A$2:$B$12,$A$2:$B$12)=1,COLUMN($A$2:$B$12)-COLUMN($A$1)+1)
returns
{FALSE,FALSE;FALSE,2;FALSE,FALSE;FALSE,FALSE;FALSE,FALSE;1,2;FALSE,FALSE;1,2;1,2;1,FALSE;1,FALSE}
This is the column number for each TRUE value
What I want to know is when I drag the formula down how can I obtain the values from left to right? ie:
2
1
2
1
2
1
2
1
1
View 9 Replies
View Related
Apr 3, 2014
I am trying to declare a public (or global) array and it's values so I don't have to keep dimensioning it for each function I create.
I was trying things such as:
Public whatever(10) as string
whatever(0) = "something"
whatever(1) = "somethin else"
....
And tried creating an initialize macro in "ThisWorkbook".
View 11 Replies
View Related
Apr 8, 2014
I am trying to store values into a dynamic array. The size of the array will vary each time, so I need the range to be dynamic. Most importantly, I need all values to be retained in the array. Currently, a value will be stored, but once the next round of the for loop is initiated, the array changes to "<subscript out of range>" and stays that way until the it is replaced by the next value. So, there isn't an accumualtion in the array--it goes one value, to out of range, to one value, etc.
View 8 Replies
View Related
Jun 16, 2009
I am trying to simply place my array of values onto the worksheet.
I had read, and thought that the following would work:
View 2 Replies
View Related
Nov 5, 2008
I've been manually writing IF statements out for ranges of data that could easily be done with a little array work. So I set out to convert all my functions into something more readable and quicker to write. But I ran into a problem. I want to add the values of an array G45:Z45 if the corresponding values in G44:Z45 are less than or equal to P41. So I thought to use a SUMIF:
=SUMIF(G44:Z45,<=+P41,G45:Z45)
That didn't work, in fact, it didn't come error free until I did:
=SUMIF(G44:Z45,"<="+P41,G45:Z45)
But that doesn't add anything up either. From what I can see, the problem lies within the condition. If I simply put P41, it works. The moment I add <= I get a multitude of problems.
View 2 Replies
View Related
Mar 14, 2012
I'm trying to count the number of times "Y" occurs in column H and one of four values occurs in column B. I'm new at writing arrays and what I have so far is:
{=SUM((Main!$H$4:$H$700="Y")*OR(Main$B$4:$B$700="FGZ","FHZ","FLZ","NAV"))}.
This is returning a #VALUE error. A
View 5 Replies
View Related
Jul 23, 2013
I have an array defined from 1 to 100; however, only six elements of the array have a value. I need to add a value in between the ones already in the array. I have tried this snippet already with no luck.
Code:
For Z = a To MinPos
WOList(Z + 1).F1 = WOList(Z).F1
Next Z
WOList(MinPos).F1 = CalcValue
A is defined as the total number of elements with values in the array (6 values in this example). MinPos is defined as the location of which the value needs to be inserted (lets say index 2). I tried to shift all the elements to the right one, and add the number into the array.
View 4 Replies
View Related
Aug 15, 2013
I have Column A which is an Employees birth Year, Column B which is salary, and Column C which is a list of Years.
I need a formula to read the Year in Column C, refer to Column A finding all the rows that match that year, than refer to Column B (salaries) and find the average of the salaries.
View 1 Replies
View Related
May 9, 2014
I have been trying to set up a macro to find the Minimum and Maximum values from an array of temperatures for painting... so far, partially successful.
The problems I am having are that the values have 1 decimal place and can be anywhere between 22.7 to -1.4. When they come they are put on the spreadsheet, the MinTemp can be 10.0 and MaxTemp 9.9, totally reversed.
Dim Info(2000, 2) As String
Dim MonthValue(31, 9) As Variant
Dim Working1 As Date
Dim I As Integer
Dim J As Integer
Dim Tot As Integer
[code]....
View 2 Replies
View Related
May 16, 2014
Presently I calculate a worksheet and store the result in any array the size of which is determined at the start. I then enter all the results in a worksheet and get the max and min values and numerous other data. I am trying to find a way to get the max and min values without having to enter the data to speed the routine up.
this is the code that puts the results into a worksheet.
Code:
Sub Recalculate() 'Recalculates the WorkBook
Dim Calc_
Worksheets(startSht).Select
Set Output = Application.InputBox(prompt:="Please select the 1st Output Range.", Title:="SPECIFY RANGE", Type:=8)
Set OutPutLabel = Application.InputBox(prompt:="Please select Label for
[Code]....
View 1 Replies
View Related
May 14, 2007
I have a list of data in a range on an Excel worksheet.
I want to create a macro that searches the range e.g. $A$1:$A$10 and identifies the unique cell values into an array.
So if range data = "A,B,B,C,C,D,D,D,E" I would end up with an array containing 5 items "A,B,C,D,E".
I would then like to cycle through each array item and bring up a message box displaying the value of each array item.
View 9 Replies
View Related
Mar 27, 2008
Is it possible to add cell values to an array i.e. Array(cells(1,1).value,Cells(2,1).value)
View 9 Replies
View Related
Aug 6, 2008
I am trying to loop through some rows within a worksheet in an effort to make sure the values match a list of values that are defined in an array. However, when I get to the IF statement, I always get a 'Type Mismatch' error.
Dim varRetailers
varRetailers = Array("Depot", "Lowes", "Sears", "TSC", "Walmart", "Z-Other")
For c = rowDataStart To rowDataEnd
If Cells(c, colRetailCat) varRetailers Then '
View 9 Replies
View Related
Aug 17, 2009
I have made an array of variables and pasted them into another sheet using the range().value = myarray command. When I use the following command to put the values from this pasted set of variables into another array: ...
View 9 Replies
View Related
