Funds
Existing
Desired
Difference
[Code]....
I want to share the excess amount with negative ones and I also want it to be displayed in what percentage amount is switched. For example: D2 has excess amount of 50 but D3,D5 and D8 has a short amount of 10,10 & 30 Now I want from D2----20% (i.e D2/D3*100) should switch to D3, 20% should switch to D5 and remaining 60 should switch to D8. Is there any way of doing the same in excel.
I am working on a macro and, as part of it, I would like to look at column H of my spreadshet. If the wording in any cell in column H begins with the word, "total" I would like the cell contents of the cell in column G and up one to be dropped down one. Here is an example:
Let's say that the words "total money" is found in cell H2. I would like the cell contents of cell G1 to be moved to G2, making boths cell side-by-side having text in them - G2 and H2.
I have some macros that will look for a certain item and then move it somewhere else on the spreadsheet. However, I can't seem to get the code right to skip over the section if the text is not found. I assume it would be easiest to do it with error handling, but the attempts I've made haven't worked.
the macro will search for the text "Name" and move everything under that column elsewhere; then it will do the same for "Date." But currently, if "Name" is not found anywhere on the spreadheet, it will cause an error and ask to end or debug.
I am trying to position the cursor in a spreadsheet column based on the data within the column but am struggling with the software to do it.
What I have is:
(a) A column (A:A) containing a mix of up to 500 numbers (1 to 3 digit) and a few text entries (1 to 6 char). These form the basis of a movement log where say 100 different drivers (each with unique identity) are logged in and out, so there will be duplicates.
(b) A number of other columns logging task/times etc but the one I am interested in (B:B), contains a tick (martlet font "a") to denote the driver has departed.
What I want to do when a driver departs, is have a quick way of finding (from the top down) the row containing the drivers number (A:A) where the driver logged in, but has not yet departed (so I can tick him out!).
So from the top: find the first row (in A:A) matching a specific number/string, where B:B is also blank and position the cursor at B"x").
I have imagined a "button" with data entry at the top of the sheet being the easiest physical way of doing it but am open to offers.
Can the Cursor (or cell?) be highlighted as well, because this is not always easy to see in bright light.
I have a sheet which I need to arrange and it looks like -
Column A
Column B
Column C
Column D
[Code]...
the values in Column B, C , D , E & F need to be in new columns based on what we have in Column A associated with "1"
Output should be -
Column A
Column B
Column C
[Code]....
so whatever is in Column A associated with "0" should remain in place whereas whatever is in Colimn A associated with "1" should get added to the new columns. 0 and 1 resembles the 1 Records which are used as a split to normalize the data.
I'm trying to make a macro that will search a folder and move all files from 2008 into another folder. So far it can do this, but what i need is for it to search subfolders also. At this point it moves all files from the main folder, but nothing from the subfolders.
Option Explicit
' Reference site [url]
Sub Copy_and_Rename_To_New_Folder()
Dim objFSO As FileSystemObject
Dim objFolder As Folder
Dim PathExists As Boolean
Dim objFile As File
Dim SrcFolder As String
Dim DestFolder As String
Dim x, Counter As Integer, Overwrite As String, strNewFileName As String
Dim strName As String, strMid As String, strExt As String
Dim LastModYear
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
I am basically trying to find the first non-empty cell in a range, but I want the macro to look down columns first. In other words, I want it to look down column A, then column B, and so on. Right now I believe it is searching by rows.
With Columns("A1:D15")
.Find(what:="*", after:=.Cells(1, 1), LookIn:=xlValues).Activate
End With
how to make it search through columns then rows?
is there a way to stick a few row of cells together so that when i move one they all move.. i have some rows that when i sort them i want them to move together with the other ones..
View 9 Replies View RelatedIm am trying to create a search marco button that allows me to search in multiple worksheets in one work book. I came across this CODE the first part of it works. It pops open user input box and ask for the word that i would like to search but the this error message pops up Runtime error1004 Method 'range" of object'_Global'failed and i dont know what to do
Private Sub SearchButton_Click()
SearchString = InputBox("Enter Search String", "Search")
If SearchString = "" Then Exit Sub
For Each c In Range(myRange)
If InStr(LCase(CStr(c)), LCase(SearchString)) Then
[Code]....
I have a workbook with many many sheets in it. The first sheet contains a single column with about 10,000 different values. I'd like to use each of these as search criteria against ALL data in the other sheets (of which there are a good 50 or so). If matches are found (they don't have to be exact case), then I'd like two things to happen:
1. The rows containing the matched search criteria in the first sheet are highlighted.
2. In the cells adjacent to the search criteria in the first sheet, hyperlinks to the matched data are created and named after the sheet upon which this matched data appears.
I've attached a sample file to this post with ideal sample 'answers' to queries made of the first 2 terms.
Using the search macro code below, could someone please help to add in more codes what I'm currently using, and also where to insert it. The Search function works well for what I need and it helps me to locate data. When using the search function somehow it search all sheets within the workbook but I only want it to search an array of sheets when using this macro that is needed to complete the task for what I'm after.
Macro
Public Sub FindText()
'Run from standard module, like: Module1.
Dim ws As Worksheet, Found As Range, rngNm As String
Dim myText As String, FirstAddress As String, thisLoc As String
Dim AddressStr As String, foundNum As Integer
myText = InputBox("Enter the text that you want to search for:", "Start Search!")
If myText = "" Then Exit Sub...................
I'm from Bavaria, Germany. Right now, I am doing an internship for my studies. my problem: I need a search procedure which shows an Input Box where you can enter a word to search for. It should work like the original Excel search (Ctrl-F), but with a simpler design, like with my own Text "Enter your Query" and a Button "Submit Query" / "Quit search". Is there the possibility to Highlight the Search Target? The problem hereby is that this highlighting should not be permanent. That means the user sees the target for which he searched for, the cell highlighted in a different color, etc. But as soon as the user clicks onto another cell, etc., the highlighting vanishes. If there is no fitting match, there should be a MessageBox like "Sorry the Target xyz cannot be found"
View 9 Replies View RelatedWhat i have so far is:
-3 Sheets (Sheet1 - Search, Sheet2 - Data, Sheet3 - Result)
-Sheet1 has a userform ready to link up - this opens up when workbook and worksheet is activated.
-Sheet2 has some example data to search - the search is for column 1 (see attachment)
-Sheet3 has a template ready for the data to be pasted to.
I would like the search result is column 1 to copy the data from columns 1 to 7 to sheet3.
I want the template/layout to remain after the pasting of results. (everything protected from editing, if possible).
Once finished (ie go back to sheet1, i want the data from sheet3 to be cleared.)
I' having trouble using the =IF(ISNUMBER(SEARCH formula to search multiple cells.
I can get it to work to search one cell (as below):
=IF(ISNUMBER(SEARCH("Same",G10)),"No Change",'Aug 09 Matrix'!F10)
(In this case the respone is No Change as Cell G10 contains "Same")
However cannot get it to work for several cells. I have pasted below and highlighted the function I would like it to perform:
=IF(ISNUMBER(SEARCH("Same",G10:R10)),"No Change",'Aug 09 Matrix'!F10)
Essentially the other cells in that row (G10:R10) all contain "Same", however for some reason it is identifying this as FALSE and putting in the data from the 'Aug 09 Matrix' sheet.
I need one formula to copy and paste the checkcard data changing it from this "CHECKCARD XXXXXX5623" to "CHECKCARD 5623", but I need one formula to look for multiple known checkcard numbers. I will have more then one typically in the bank download so I need to search and copy at least two known numbers as shown below.
I am providing the formula that I am using right now, "=IF(ISNUMBER(SEARCH("5623",B3)),RIGHT(B3,41),"")" but it only works for one checkcard number? Also I don't really need to capture the DEBIT or CREDIT that will always be at the end, it would be redundant. If it's easier to write the formula including that data that is no problem. What I want to copy and move into an adjacent cell is in red.
Here is the source data:
Row 2 - SONIC DRIVE IN#1531 AUSTIN TXDEBIT FOR CHECKCARD XXXXXX5623 DEBIT
Row 3 - JASON'S DELI # 125 Q64 AUSTIN TXDEBIT FOR CHECKCARD XXXXXX9718 DEBIT
I have an 'Update' Module that search the value of the Userform1.txt_sc.Value in Column B, but I want to search to 2 criteria, how can i amend the below code to search for 2 criteria ( userform1.txt_sc.value & userform1.txt_linenum.value )
View 2 Replies View Relatedwhat i have is a spreadsheet with several sheets to it. i have many invoice numbers throughout the spreadsheet. what i would like to do is add a search tab or something so it will take me to the desired sheet that the user defined input "search" said. but i may have same invoice number on 2 or 3 different pages so i would need it to tell me that it is on 3 differents sheets
Example: I type in 658969 and it will automatically go to the sheet with this invoice number or return "No Entry Found" if it doesnt' have a match. or something to this affect and i don't know what do do if the input is found on multiple pages.
How would one go about making a module that would tell Sheet1 that if any number in column B is greater than 1 then take the contents of the row that number is in and copy it to Sheet2? Attached is an example of the workbook.
I have 8 rows (B345:B352) that have a formula similar to this:=IF(Site1!B53>0,CONCATENATE(Site1!$B$53," Scansys 942 @ ","$",Site1!D53,".00"),""). By the way, can the formula be shortened? I tried formatting the merged cell but nothing changes.
When Site1!B53=0, then there's nothing in the cell.That's how I want it. But say, row 3, Site3!$B$53 >0 how do I programatically move (copy/paste?) row 3 to row 1 (since row 1 and row 2 are blank)? In other words, Since rows 1 & 2 is blank, I don't want the two empty rows there, so I would like to move row 3 up to row1.
I have a workbook with several sheets each containing different numbers of rows. These rows contain data from clients (codes etc applying to motors). The rows have been randomly populated and I am having to move rows from somewhere in the sheet up or down so the codes are grouped according to which motor they apply to.
What I want to do is select a row and be able to run a macro that will move it where I want. The destination can be up or down and any number of rows away. Does anyone have any ideas how to do this? I was thinking that if I selected the row I wanted to move and the one I wanted to move it to then run the macro it could be moved. Its not to replace the destination row, but be inserted alongside it.
For a specific equation to work I need to know the distance whenever the acceleration is maximum.
The last part is a piece of cake, using MAX I get the desired results.
However, returning the distance is difficult.
What I'd like to do is return the value of the cell to the right of the maximum acceleration.
Using
=ADDRESS(MATCH(MAX(K2:K754);K2:K754;0);COLUMN(K2:K754))
I got the address of MAX, but that's about as far as I get.
I have got a problem with moving to another cell. For example, I click A1, the active cell is A1, then I wanna move to B1. I usually just need to use the right arrow on my keyboard to move. But this time, it didn't move - instead, it moves the scroll bar.
View 2 Replies View RelatedI've got a selected area and a button I've got to click on. I can't see them both on the screen at the same time.
If I try to move from the selected area to the button the selected area becomes unselected!
How do I keep it selected?
That's the problem and the question. If you'd like to know the background it is this:
I need to put a spreadsheet into a web page and I downloaded a macro that will generate slim html code for you, for any spreadsheet.
This is it. When I ran it I discovered it opened in its own spreadsheet with this button to get it started once you've pasted into it the spreadsheet or part of a spreadsheet that you want converted.
Makes it nice and easy. Easier than bothering to import a macro into your own spreadsheet.
I tried to move a tab to a new Excel workbook. You may say that it is very straightfward to do it: right click the tab and then do 'move' or 'create a copy'.
I found the problem is that the whole color will be completely changed and look bizarre. I really like to get a genuine copy of the tab: all remains the same.
I am trying to move some parts of a row (From G:AE) where text is found in G Column. It moves it back 1 column from G
[Code] .....
Attached File : ozeform.csv
In column F if a cell contains the word Test I want it to copy the cell where it is found and paste the value of it exactly 4 cells to the left.
View 1 Replies View RelatedI could get a code to move a row from one area of a worksheet to another area on the same worksheet once a cell is tagged "Paid" via a refreshed macro. The updating data table starts on Row 3 for columns "B" - "R." The paid table starts on row 56 where column "B" always has a date in its cell.
View 7 Replies View RelatedCan this code be modified to copy pictures rather than move them? I want to keep them in a tidy library column A:A. The workbook finds a picture based on the picklist, it is an example I found online but I need it to copy and paste the picture (and leave the original where it is).
F1 cell
=VLOOKUP(A2, PicTable, 2, FALSE) this is connected to a 2 column validation table called picTable that has names in the first column (values in the picklist) and picture names in the second column (which corrosponds to the actual picture names)
Also, long after they have been copied, I need to clear all of what I have copied (with a macro button), but when I record a macro to do this it doesnt work because the copied "picture number' changes each time it is copied and the recorded macro only deletes the picture object number that I deleted when recording it!
I am trying to move the data in a row from cell D thru I (eye) to cell H thru M.
Simply move it all over a few cells. Well not so simply.
The line in RED fails.
